Electric projection screen Avers Contour User’s manual Read these instructions carefully before operating the screen.
Dear Customer, Thank you very much for the purchase of our product. The manual booklet contains all operation information you may require to install properly and operate the screen. We hope it will help you to get the most performance and enjoyment of your new screen. Enjoy time with the Avers Screens product. SAFETY INFORMATION NOTICE: Important safety information. Follow the instructions described in the operating manual for safety reasons.
1. SAFETY RULES SAFETY INFORMATION NOTICE: Important safety information. It is important for the safety of persons to follow these instructions. After reading the manual, please save it just in case of need in the future Do not allow children to play with the fixed controls (remote control). Keep the remote control unit out of reach of children. Frequently examine the screen installation for imbalance and signs of wear or damage to cables. Do not use if repair or adjustment is necessary.
2. Product specification Electrically rolled projection screen designed for fixed installation at projection systems for business presentations and/or home cinema applications. Best picture quality can be reached based when the selection of the projection surface type and size will be optimal for the, projection device (projector) and projection conditions at the planed installation. Optional remote control system can significantly improve comfort of use of the screen. 2.1.
Dimensions of projection screens. Screen width Viewing area size [cm] [cm] Screen aspect ratio Screen case size W x H x D [cm] Projection fabrics max.
D= 2034 mm for Contour 18xxx 2334 mm for Contour 21xxx 2634 mm for Contour 24xxx Pic.1 Installation of the rods and anchors in the ceiling Pic.2 Ceiling modul installation Pic.3 Screen module installatiuon Rys.4 Masking module installation - Modify the recessed ceiling checkerwork to create rectangular whole of 106 x W+191 mm dimensions, (W - screen fabrics width in milimeters). Bottom flange of the properly installed ceiling module should be surfaced with the ceiling checkerwork.
3.3. Screen installation in the cardboard-plaster recessed ceiling. - Trace the shape of the ceiling module installation whole. Cut out the whole in the recessed ceiling according to the traced shape. - Slot up the ceiling module into the prepared whole and fix it with the installation springs. D= 1991 mm for Contour 18xxx 2291 mm for Contour 21xxx 2591 mm for Contour 24xxx Pic.5 Ceiling module installation slot preparation Pic.7 Screen module installation Pic.6 Ceiling module installation Pic.
3.4. Electric installation. ATTENTION: Electric installation work should be carried out by a certified electrician. - Lead out the power cables to the place of installation of the wall switch and between wall switch and screen. - Screen power line should be fused with 1A fuse. - Switch off the screen power line during installation work.
4. Screen operation Projection screen AVERS can be operated automatically (after installation of optional remote control system) or manually. 4.1. Manual operation Manual screen operation is possible with the wall control switch or by radio frequency transmitter of the optional remote control system. - Push button „€ ”, the screen will begin to roll down and stop automatically at the bottom position after rolling down.