User's Manual

AV-3072D Assembly SOP:

1. Place 1PC AV-3072D and lock it

2. Plug-in the AV-

3072D from step 1 to the 4

Place the assembly from step 2 onto the top

arm

Place two antennas from step 3, and then secure the connector with

two screws

ENGLISH

3072D from step 1 to the 4

-pin connector

Place the assembly from step 2 onto the top

-cover of the rotational

Place two antennas from step 3, and then secure the connector with

PAGE 1
ENGLISH AV-3072D Assembly SOP: 1. Place 1PC AV-3072D and lock it 2. Plug-in the AV-3072D 3072D from step 1 to the 4 4-pin connector top-cover of the rotational 3. Place the assembly from step 2 onto the top arm 4.
PAGE 2
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.