User’s Manual v1.
Table of Contents CHAPTER 1 GETTING STARTED Getting Started Inventory Safety and Maintenance Checklists Features Where to Look For Information Quick Start Loading Windows Adjusting the Volume Adjusting the Brightness Turning off Your Computer Making a Startup Disk Tips for New Owners CHAPTER 2 GETTING STARTED Hardware and Software Front View Left View Right View Bottom View LED Status Indicators Power Indicators Function Keys Numeric Keypad Touchpad The Optical Drive Connecting the Printer
The PC Card Slot The Graphics System Communication Components Built-in Wireless Local Area Network CHAPTER 3 MAKING CONNECTIONS Making Connections Left Side Connectors Right Side Connectors Front Side Connectors CHAPTER 4 POWER MANAGEMENT Power Management Power Saving Modes Power Saving Tips When to Replace the Battery Heat Considerations CHAPTER 5 USING THE BIOS SETUP UTILITY Using the BIOS Setup Utility Navigating and Entering Information in BIOS The Main Menu Advanced Menu Boot menu Security menu Exit
Exiting and Saving APPENDIX A FREQUENTLY ASKED QUESTIONS Frequently Asked Questions APPENDIX B STATEMENTS Statements European Notice UL CAUTION Canadian Department of Communications Battery Disposal CAUTION FOR ADAPTER BATTERY CAUTION CLASS 1 LASER PRODUCT
Chapter 1 Introduction
Chapter 1 — Introduction Getting Started Congratulations on your purchase of a Notebook computer! Your new notebook features the most innovative advances in portable computing technology. It combines state-of-the-art ergonomics with sophisticated architecture to provide you with a personal computer that is compact, powerful, and easy to use.
Introduction — Chapter 1 Inventory This computer system is designed for years of productive and pleasurable computing. Use this section to keep details of your purchase. This information will be required should you need to make repairs to your notebook during the warranty period. Update this section when you add new options.
Chapter 1 — Introduction Safety and Maintenance You can use your computer under a wide range of environmental conditions. However, to ensure long use and continued high performance, consider the following factors when setting up your computer: x Follow all warnings and instructions noted in this documentation and in the Windows Help program.
Introduction — Chapter 1 x For best results, use a power strip with a built-in surge protector. Do not use inferior extension cords as this may result in damage to your computer. x Set the computer on a flat, stable surface. To prevent damage to the computer’s hard disk drive, avoid using the computer where it will be exposed to strong vibration. Checklists After opening the package, carefully inspect the contents. If any of the items are missing or appear damaged, contact your dealer.
Chapter 1 — Introduction Features High Capacity Hard Disk Drive The computer has a high capacity hard disk drive, to store your favorite programs and large multimedia files. Built-in Modem/LAN Capability A built-in 56k modem and 10/100 Mbps Ethernet port allows you to access the Internet or a local area network (LAN). AveraBrite™ LCD Display Your computer has an easy-to-view WXGA LCD panel with AveraBrite™ Built-in Stereo Speakers The stereo speakers output sound from your multimedia applications.
Introduction — Chapter 1 Where to Look For Information About Your Computer This User’s Manual describes the key elements of your computer. New users can find a simple step-by-step orientation in the Quick Start section of this chapter. About Windows Windows Online Help, found on the Start menu, offers extensive Windows assistance. Tour Windows XP offers an online orientation for new Windows users.
Chapter 1 — Introduction Quick Start Turning on the Computer for the First Time 1. Connect the power cord to the AC adapter. 2. Connect the AC adapter to the DC power port on the rear of your computer. 3. Connect the AC adapter power cord to an AC outlet. 4. Open the LCD panel to a comfortable viewing angle. 5. Press the power button to turn on the power. Note: The battery is not fully charged. Allow your battery to fully charge before using it (i.e., before disconnecting AC power).
Introduction — Chapter 1 Alternatively, you can adjust the volume with the Windows volume control applet located on the taskbar. Adjusting the Brightness Use the following hot key combinations to adjust the LCD panel brightness: x Fn + F6 decreases the brightness x Fn + F7 increases the brightness Turning off Your Computer Turning off the computer properly is important in maintaining your computer. 1. On the Start menu, click Shut Down. 2.
Chapter 1 — Introduction Warning: Shutting off the computer improperly may result in data loss. Tips for New Owners Take responsibility for backup Back up files often. Users who need to manage large amounts of data may wish to use backup devices such as a USB drive. If you use your notebook as a networked workstation with system backup, talk to the system administrator about backup procedures for your notebook.
Introduction — Chapter 1 Note: Using a computer for extended periods of time with a poor workstation setup and incorrect work habits can cause health problems.
Chapter 2 Getting Started
Chapter 2 — Getting Started Hardware and Software This chapter introduces the different components and controls of your notebook computer, including the hardware components, the software, and the audio and video systems. Getting Started Before you begin using your computer, read this chapter to familiarize yourself with the main components installed in the system.
Getting Started — Chapter 2 Front View 1. LCD panel 6. Touchpad 2. Speakers 7. Touchpad buttons 3. Power button 8. Wireless LAN switch 4. Keyboard 9. Windows Media® Player Quick Launch Button 5.
Chapter 2 — Getting Started Left View 1 2 3 4 1. LAN RJ-45 jack 2. Fax/modem RJ-11 Jack 3. IEEE 1394 port 4. Optical drive Bezel 5. Optical drive button 6. PCMCIA card slot 7.
Getting Started — Chapter 2 Right View 123 4 1. Microphone jack 2. MS/MMC/SD/MS Pro card slot 3. Ear phone jack 4. USB ports 5. VGA external video display port 6.
Chapter 2 — Getting Started Bottom View 1. DC-IN jack 2. Ventilation slot 3. Battery release latch 4. Battery 5.
Getting Started — Chapter 2 LED Status Indicators The status indicators in the lower right corner of the keyboard light up when a particular function of the computer is active. Each indicator is marked with a symbol. The computer is reading information CD ROM Drive from the DVD-ROM or the Combo drive. Number-Lock The keyboard is in Num-Lock mode. Caps-Lock The keyboard is in Caps-Lock mode. Power Indicators The power indicators show which power source the system is using.
Chapter 2 — Getting Started Function key Description Fn + F3 Toggles display on/off Fn + F4 Suspend to RAM/HDD Fn + F5 Toggles between LCD/CRT displays Fn + F6 Decreases LCD brightness Fn + F7 Increases LCD brightness Fn + F8 Decreases Volume Fn + F9 Increases Volume Fn + F10 Mute Volume Numeric Keypad The embedded numeric keypad consists of ten keys that make number intensive input more convenient. Press to enable or disable the numeric keypad.
Getting Started — Chapter 2 Touchpad The touchpad is a pressure sensitive pointing device that provides all the features of a two-button mouse. Its primary function is to move the cursor around the screen. Touchpad Touchpad buttons The instructions listed below describe how to use the touchpad. 1. First, place your fingers on the keyboard in the normal typing position. The touchpad is easily accessible by moving either your left or right thumb off the space bar and on to the touchpad. 2.
Chapter 2 — Getting Started 5. Double-clicking is a common technique for selecting objects or launching programs from icons. Once you have moved the pointer over the object you wish to select, rapidly press the left button two times. This action is commonly referred to as “doubleclicking” an object. Dragging There are two ways to drag: x Move the pointer to the desired location then press down the left button. While still holding down the left button, move the pointer to the desired location.
Getting Started — Chapter 2 The Optical Drive Your computer comes with a pre-installed Optical drive. The optical drive can read both DVDs and CDs. Your notebook identifies the drive with the letter following the hard drive letter. If your hard drive is C, then the optical drive will be D. Inserting a Disc 1. Press the button on the front of the drive to open the disc tray and pull the tray open. 2. Place the disc on the tray, label side up. 3.
Chapter 2 — Getting Started x Do not write on the surface of the disc. x Extremes in temperature may damage discs. Store discs in a cool dry place. x Do not use benzene, thinners, or cleaners with detergent. Only use optical cleaning kits. x Do not bend or drop the discs. x Do not place objects on top of discs. Warning: Do not insert any foreign objects into the disc tray. Do not force the tray to open or close manually.
Getting Started — Chapter 2 The PC Card Slot The PC card slot can be used as an interface between your computer and a variety of communications devices, such as network adapters, fax/modems or provide additional data storage capacity. Your computer's PC card slot supports PCMCIA Type II and 32-bit CardBus. Installing a Card 1. The top side of a PC card is usually identified with a label. Insert the card into the slot with the label side up and the edge with pinhole contacts going in first. 2.
Chapter 2 — Getting Started The Graphics System Your computer has a high-performance graphics system, which can easily handle the demands of today's multimedia computing. Screen Controls Brightness Function keys can increase or decrease the brightness of the monitor. x + decreases the LCD panel brightness x + increases the LCD panel brightness Resolution 1. Click My Computer/Control Panel/Appearance and Themes/Display. Click the Settings tab.
Getting Started — Chapter 2 3. On your notebook, click the right touchpad button on the Windows desktop to open the desktop menu. Click Properties to open the Display Properties window. 4. In the Display Properties window, click Advanced in the Settings tab. Click the Intel Extreme Graphics tab. 5. You are now able to select the appropriate options to change the display to an external monitor. 6. Adjustments to screen resolution and color depth can also be made in this dialog box.
Chapter 2 — Getting Started Mirror In Mirror mode, the video display hot key combination is available—you can cycle the video output by pressing the Fn + F5 keys. If the external CRT is connected, the display on the LCD and the CRT is the same. Tip: To ensure trouble-free video output, the first time you use an external monitor, change the output in the Display Properties dialog box. After successfully switching modes, you may use the video function keys.
Getting Started — Chapter 2 Note: Light or dark dots may appear on the LCD due to technical limitations of LCD manufacturing. This will not effect normal operation of the LCD. Communication Components This system provides powerful communication functions, including a built-in Fax/Modem and PCMCIA card slot. Fax/Modem A phone jack on the left side of the computer allows you to connect to the Internet to send and receive data. When used with fax software, it can be used as a fax.
Chapter 2 — Getting Started DGT Warning Article 14 Without permission, any company, firm or user shall not alter the frequency, increase the power, or change the characteristics and functions of the original design of the certified lower power frequency electric machinery.
Chapter 3 Making Connections
Chapter 3 — Making Connections Making Connections Your computer is equipped with a full array of ports and connectors, including standard input/output (I/O) ports for quickly and easily adding peripheral devices such as printers, keyboards, and mice. Refer to documentation included with individual devices for details on connecting these devices to your computer.
Making Connections — Chapter 3 Warning: Plug your modem into an analog telephone jack only. Most homes use analog lines. Do not use digital lines, such as the PBX and ISDN systems found in many offices. Digital lines may damage your modem. 3. FireWire / IEEE 1394 / 1394a Port This is a high-speed serial data port. You may connect any FireWire compatible device to this port. 4. Optical Drive Your computer comes with a built-in Combo DVD+CD-RW Drive. You may view DVDs and write to a CD-R or CD-RW disc. 5.
Chapter 3 — Making Connections 1. Microphone-in Jack Connect a microphone to this jack to record. 2. MS Pro/MS/MMC/SD 4-in-1 card reader slot The 4-in-1 card reader slot is specially used for the device with a MS Pro/MS/MMC/SD interface card. Insert the card into the 4-in-1 card reader slot securely for device access. 3. Audio-out Jack Connect a stereo headset or external speakers to this jack to listen to multimedia. 4. USB 2.
Making Connections — Chapter 3 Front Side Connectors 1 1. Wireless LAN On/Off Switch Use the switch to disable or enable the Wireless LAN function.
Chapter 4 Power Management
Chapter 4 — Power Management Power Management Battery Calibration The first time you use a battery, you should calibrate it. The calibration process empties and charges the battery one time. This allows the Windows battery gauge to accurately monitor battery status. To calibrate a battery, follow these steps: 1. Plug in the AC adapter. 2. Restart the computer and when the startup screen appears, press F2 key to enter the BIOS Setup Utility. 3. In the BIOS Setup Utility, select Advance settings.
Power Management — Chapter 4 Monitoring Battery Power There are two ways to monitor how much power the battery has left. 1. Click start/Control Panel/Performance and Maintenance/Power Options; then click Power Meter. 2. Moving the cursor to the battery icon on the taskbar is the simplest way to check on battery power status. If you do not see the battery icon, enable it in Start /Control Panel/Performance and Maintenance/Power Options. Choose the Advanced tab and click “Always show icon on the taskbar.
Chapter 4 — Power Management • Connect the AC power adapter • Save your work, turn off the computer and replace the discharged battery with a charged battery (See Changing the Battery below). Do not restart the computer until you have connected to an AC adapter, or replaced the discharged battery with a charged battery. Battery Charging When you use the AC adapter to connect your Notebook to a power outlet, the internal battery will automatically begin to recharge.
Power Management — Chapter 4 • Pressing the power button (if enabled in power settings). • Pressing the suspend function key + . Power Button Settings The function of the power button can be set to Shutdown or Standby in the Power Options Properties dialog box. However, holding the power button down for more than four seconds will force a power off while operating under any situation, resulting in the loss of any unsaved information.
Chapter 4 — Power Management When to Replace the Battery Over time, the battery's capacity gradually decreases. We recommend that you replace your battery when you notice that it begins to store significantly less charge. Changing the Battery Change the main battery pack as follows: 1. Turn off the computer. 3 2. Close the screen cover and turn the computer over. 3. Unlock the side battery latch (2) by sliding it to the right. 3 1 2 4. Slide the side battery latch (1) to the left.
Chapter 5 Using the BIOS Setup Utility
Chapter 5 — Using the BIOS Setup Utility Using the BIOS Setup Utility Your notebook has a BIOS setup utility which allows you to configure important system settings, including settings for various optional functions of the computer. This chapter explains how to use the BIOS setup utility. BIOS Setup Menu The BIOS setup Utility allows you to configure your computer’s basic settings.
Using the BIOS Setup Utility Navigating and Entering Information in BIOS Use the following keys to move between fields and to enter information: + Tab F1 F10 ESC Select Tab Push the up and down arrow keys to move among selections, then press Enter to make a selection. Change Option Select Field General Help Save and Exit Press Esc to exit any section. If you wish to exit the BIOS utility without saving changes, go to the main menu, then press Esc.
Chapter 5 — Using the BIOS Setup Utility The Main Menu BIOS SETUP UTILITY Main Advanced Boot Security Exit Use [ENTER] , [TAB] Or [SHIFT-TAB] to select a field. System Overview AMIBIOS Version : R0.
Using the BIOS Setup Utility Advanced Menu BIOS SETUP UTILITY Main Advanced Boot Security Exit Select the amount of Advanced Setting system memory used by Legacy USB Support Battery Learning Start FAN Learning Battery Alarm Function [Enable] [Enter] [Enter] [Disabled] the internal graphics device.. ?? Select Screen ?? Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit V02.53 ©Copyright 1985-2002, American Megatrends , Inc.
Chapter 5 — Using the BIOS Setup Utility Boot menu BIOS SETUP UTILITY Main Advanced 1st Boot Device 2nd Boot Device 3rd Boot Device [CD-ROM] [HDD] [Network] Boot Security Exit Specifies the boot sequence from the available devices. A device enclosed in Parenthesis has been disabled in the corresponding type menu. ?? Select Screen ?? Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit V02.53 ©Copyright 1985-2002, American Megatrends , Inc.
Using the BIOS Setup Utility Security menu BIOS SETUP UTILITY Main Advanced Boot Security Settings Supervisor Password : Not Installed User Password : Not Installed Security Exit Install or Change the password. Change Supervisor Password Change User Password ?? Select Screen ?? Select Item Enter Change F1 General Help F10 Save and Exit ESC Exit V02.53 ©Copyright 1985-2002, American Megatrends , Inc.
Chapter 5 — Using the BIOS Setup Utility Exit menu BIOS SETUP UTILITY Main Advanced Exit Options Save Changes and Exit Discard changes and Exit Discard Changes Boot Security Exit Exit system setup after saving the changes. F10 key can be used for this operation. Load Optimal Defaults ?? Select Screen ?? Select Item Enter Go To Sub Screen F1 General Help F10 Save and Exit ESC Exit V02.53 ©Copyright 1985-2002, American Megatrends, Inc.
Using the BIOS Setup Utility Change User Password With a User password, you can enter the Setup Utility and change or remove the User password, but you cannot enter the Setup Utility and change or remove the Supervisor password, nor enable diskette access if it has been disabled. Change Supervisor Password A supervisor password must be set before a lower-level user password can be set. After selecting Change Supervisor Password, press Enter.
Appendix A Frequently Asked Questions
Appendix A Frequently Asked Questions Q: A: Q: A: Q: A: My screen times out too quickly. I have to constantly hit a key or move the mouse in order to bring it back. How can I adjust the screen time-out? This is part of Windows Power Management. Access Power Management by clicking on Start / Settings / Control Panel / Performance and Maintenance / Power Options / Power Schemes. Adjust the display time-out by selecting a time next to the Turn off monitor option.
Appendix A A: After portable computers have not been used for a long time (more than one month), the batteries will go into the low voltage protection mode due to data back-ups and natural electrical discharge. At that point, restoring normal voltage will require slow charging over a period of several hours. Calibration can be performed after the battery has returned to a normal condition.
Appendix B Statements
ENGLISH Appendix B — Statements Statements Federal Communications Commission Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Appendix B — Statements About The Modem This equipment complies with Part 68 of FCC rules. On the bottom of this equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment. If requested, this information must be provided to the telephone company. The modem jack of this equipment complies with Sub-part F of Part 68 of FCC rules.
Appendix B — Statements The Telephone Consumer Protection Act of 1991 marks it unlawful for any person to use a computer or other electronic device, including fax machines, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entity, or other individual sending the message and the telephone number of the sending machine or such b
Appendix B — Statements Is herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (89/336/EEC), Low- voltage Directive (73/23/EEC) and the Amendment Directive (93/68/EEC), the procedures given in European Council Directive 99/5/EC and 89/3360EEC. The equipment was passed. The test was performed according to the following European standards. EN 300 328 V.1.4.
Appendix B — Statements About the Modem The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational and safety requirements. The department does not guarantee the equipment will operate to the user's satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company.
Appendix B — Statements Battery Disposal THIS PRODUCT CONTAINS A LITHIUM-ION OR NICKEL-METAL HYDRIDE BATTERY. IT MUST BE DISPOSED OF PROPERLY. CONTACT LOCAL ENVIRONMENTAL AGENCIES FOR INFORMATION ON RECYCLING AND DISPOSAL PLANS IN YOUR AREA. CAUTION FOR ADAPTER THIS NOTEBOOK COMPUTER IS FOR USE AN AVERATEC APPROVED AC ADAPTER ONLY. BATTERY CAUTION DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER.
Rev 06/07/04 1-YEAR LIMITED WARRANTY Applicable to new AVERATEC Notebooks The limited warranty set forth in this warranty card is provided by AVERATEC, Inc. with respect to the AVERATEC brand notebook computer. (Herein referred to as “Portable Computer”) This warranty is valid for Averatec Portable Computers purchased and used in the United States and Canada. The Portable Computer purchased is the only AVERATEC brand computer to which this warranty card and the limited warranty stated herein apply.
Rev 03/15/05 SIX MONTH LIMITED WARRANTY Applicable to new AVERATEC Batteries The limited warranty set forth on this warranty card is provided by AVERATEC, Inc. with respect to the AVERATEC brand Battery that you have purchased, when purchased and used with a AVERATEC brand notebook computer. The Battery that you have purchased is the only AVERATEC brand product to which this warranty card and the limited warranty stated herein apply.
Rev 03/15/05 1-YEAR LIMITED WARRANTY Applicable to new AVERATEC Accessories The limited warranty set forth on this warranty card is provided by AVERATEC, Inc. with respect to the AVERATEC brand Accessory that you have purchased, when purchased and used with a AVERATEC brand notebook computer. The accessory that you have purchased is the only AVERATEC brand product to which this warranty card and the limited warranty stated herein apply.
