User’s Manual
Table of Contents CHAPTER 1 GETTING STARTED 1 Getting Started ................................................................................... 2 Inventory ............................................................................................. 3 Safety and Maintenance .................................................................... 4 Checklists ........................................................................................... 5 Features ..................................................
CHAPTER 3 MAKING CONNECTIONS 33 Making Connections ........................................................................ 34 Left Side Connectors ....................................................................... 35 Right Side Connectors .................................................................... 35 Front Side Connectors .................................................................... 36 CHAPTER 4 SYSTEM SOFTWARE 37 System Software ........................................................
Statements ........................................................................................ 68 European Notice............................................................................... 70 UL CAUTION ..................................................................................... 70 Canadian Department of Communications ................................... 71 Battery Disposal............................................................................... 72 CAUTION FOR ADAPTER................
Chapter 1 Introduction
Chapter 1 — Introduction Getting Started Congratulations on your purchase of the Notebook computer! Your new notebook features the most innovative advances in portable computing technology. It combines state-of-the-art ergonomics with sophisticated architecture to provide you with a personal computer that is compact, powerful, and easy to use.
Introduction — Inventory Inventory This computer system is designed for years of productive and pleasurable computing. Use this section to keep details of your purchase. This information will be required should you need to make repairs to your notebook during the warranty period. Update this section when you add new options.
Chapter 1 — Introduction Safety and Maintenance You can use your computer under a wide range of environmental conditions. However, to ensure long use and continued high performance, consider the following factors when setting up your computer: • Follow all warnings and instructions noted in this documentation and in the Windows Help program.
Introduction — Checklists • Set the computer on a flat, stable surface. To prevent damage to the computer’s hard disk drive, avoid using the computer where it will be exposed to strong vibration. Checklists After opening the package, carefully inspect the contents. If any of the items is missing or appear damaged, contact your dealer.
Chapter 1 — Introduction Features High Capacity Hard Disk Drive The computer has a high capacity hard disk drive, to store your favorite programs and large multimedia files. Built-in Modem/LAN Capability/WLAN Module A built-in 56k modem and 10/100 Mbps Ethernet port allows you to access the Internet or a local area network (LAN). Large LCD Your computer has an easy-to-view XGA LCD panel. Built-in Stereo Speakers The stereo speakers enable you to run a variety of multimedia applications.
Introduction — Quick Start Quick Start Turning on the Computer for the First Time 1. Connect the AC adapter power cord to the AC adapter. 2. Connect the AC adapter to the DC power port on the right side of your computer. 3. Connect the AC adapter power cord to an AC outlet. 4. Slide the cover latch in the direction of the arrows to open the LCD. 5. Open the LCD panel to a comfortable viewing angle. 6. Press the power button to turn on the power. Note: The battery is not fully charged.
Chapter 1 — Introduction Loading Windows The following section is for installing the Windows operating system only. If you are installing a different operating system, please check with your vendor for installation details. Your computer will begin loading Windows once you turn on the power. Wait a few seconds for Windows setup to load.
Introduction — Adjusting the Volume Adjusting the Volume You can adjust the volume with the volume control knob located below the touchpad. Volume control button Alternatively, you can adjust the volume with the Windows volume control applet located on the taskbar.
Chapter 1 — Introduction Turning off Your Computer Turning off the computer properly is important to maintaining your computer. 1. On the Start menu, click Shut Down. 2. Click the radio button next to Shut Down in the Shut Down Windows screen, and then click OK. If you are going to be away from the computer for a short period, there are ways of conserving power without shutting down the system. See Chapter 5, Power Saving Modes, for details.
Introduction — Tips for New Owners Tips for New Owners Take responsibility for backup Back up files often. Users who need to manage large amounts of data may wish to use backup devices such as a tape backup unit or a ZIP drive. If you use your notebook as a networked workstation with system backup, talk to the system administrator about backup procedures for your notebook.
Chapter 1 — Introduction Consider using a lock For added security, consider purchasing a Kensington lock to put into the Kensington lock hole on the left side of your computer (see Chapter 2, Left View). Use the Kensington lock to secure the computer to a desk or table. Note: Using a computer for extended periods of time with a poor workstation setup and incorrect work habits can cause health problems.
Chapter 2 Getting Started
Chapter 2 — Getting Started Hardware and Software This chapter introduces the different components and controls of your notebook computer, including the hardware components, the software, and the audio and video systems. Getting Started Before you begin using your computer, read this chapter to familiarize yourself with the main components installed in the system. Slide the screen latch on the front edge of the cabinet towards the right to release the cover latch and open up the computer.
Getting Started — Front View Front View 1. LCD release latch 8. Touchpad buttons 2. LCD panel 9. Volume control knob 3. Battery 10. Microphone-in jack 4. Keyboard 5. Status indicators 11. Audio-out jack for external speakers or headphones 6. Speakers 12. Power indicators 7. Touchpad 13. WLAN switch 14.
Chapter 2 — Getting Started Left View 1 2 1. Kensington lock hole 2. VGA port external video display 3. Phone jack for internal modem 4. LAN RJ-45 jack 5. PCMCIA card slot 6.
Getting Started — Right View Right View 1. USB ports 2. CD-ROM/CD-RW/DVD-ROM drive 3. CD-ROM/CD-RW/DVD-ROM eject button 4.
Chapter 2 — Getting Started Bottom View 1. Ventilation slots 2. SO-DIMM SDRAM compartment 3. Battery release button 4.
Getting Started — LED Status Indicators LED Status Indicators The status indicators in the upper left corner of the keyboard light up when a particular function of the computer is active. Each indicator is marked with a symbol. The computer is reading information CD ROM Drive from the CD-ROM, CD-RW or the DVD ROM drive. HDD The computer is reading from, or writing to the built-in hard disk. Number-Lock The keyboard is in Num-Lock mode. Caps-Lock The keyboard is in Caps-Lock mode.
Chapter 2 — Getting Started Power Indicators The power indicators show which power source the system is using. They also show battery status and low battery power alerts. The power indicators remain active and viewable even when the LCD panel is closed. Icon T Light Description Blue Power is on and the AC adapter is in use Blue Wireless LAN Green Flashing Green Power is on and the battery is in use Power is in suspend mode Function Keys Hold the Fn key while pressing the numbered function key.
Getting Started — Numeric Keypad Numeric Keypad The embedded numeric keypad consists of ten keys that make number intensive input more convenient. Press to enable or disable the numeric keypad. Touchpad The touchpad is a pressure sensitive pointing device that provides all the features of a two-button mouse. Its primary function is to move the cursor around the screen. Touchpad buttons Touchpad buttons Scrolling area The instructions listed below describe how to use the touchpad. 1.
Chapter 2 — Getting Started the pointer over the object you want to select, and then press the left button one time. The functions of these buttons are software specific. 5. Double-clicking is a common technique for selecting objects or launching programs from icons. Once you have moved the pointer over the object you wish to select, rapidly press the left button two times. This action is commonly referred to as “doubleclicking” an object.
Getting Started — Connecting the Floppy Disk Drive Connecting the Floppy Disk Drive Your notebook computer comes with a USB port 1.44 MB floppy disk drive (option). The FDD is “hot pluggable,” so you do not have to power down the notebook to connect it. Floppy disk drive USB connector Disk Drives Your computer comes with several components for reading and writing (recording) information. Floppy Disk Drive The floppy disk drive provides a convenient way of storing and transferring small files.
Chapter 2 — Getting Started The CD-ROM, CD-RW, or DVD Drive Your computer comes with a pre-installed CD-ROM, CD-RW, or DVD drive. The CD-ROM drive is a read-only drive. It cannot be used to write data to a recordable CD. The CD-ROM drive can read data from CDs, including audio or video CDs. The CD-RW can perform these same functions, as well as record information to writeable CD's. The DVD drive can read both DVDs and CDs. Your notebook identifies the drive with the letter following the hard drive letter.
Getting Started — Connecting the Printer Precautions for Handling CD-ROM Discs Keep these precautions in mind when handling CD-ROM discs. • Always hold the disc by the edges; avoid touching the surface of the disc. • Use a clean, dry, cloth to remove dust, smudges, or fingerprints. Wipe from the center outward. • Do not write on the surface of the disc. • Extremes in temperature may damage discs. Store discs in a cool dry place. • Do not use benzene, thinners, or cleaners with detergent.
Chapter 2 — Getting Started The PC Card Slot The PC card slot can be used as an interface between your computer and a variety of communications devices, such as network adapters, SCSI adapters, fax/modems, or provide additional data storage capacity. Your computer's PC card slot supports PCMCIA Type II, 32-bit CardBus, and Zoomed Video cards. Installing a Card 1. The top side of a PC card is usually identified with a label.
Getting Started — Memory Memory Adding memory allows the computer to operate faster, handle more tasks simultaneously, and work more smoothly with large files. Users who increase memory demands - by adding additional programs, for example may notice a slowdown in operating speed, and wish to increase memory. The notebook includes a memory card slot for adding additional memory. Note: Use only 1-inch DDR SODIMM (200 pin) modules.
Chapter 2 — Getting Started Inserting a Memory Card 1. Hold the memory card by its edges with the edge-connector side towards the slot. 2. Hold the card at a shallow angle (about 25 degrees) and insert the edge connector into the connector slot (3). The “gold teeth” of the edge connector should no longer be visible when the card is fully inserted. 3. Press the card downwards so that it is flat inside the compartment (4).
Getting Started — The Graphics System The Graphics System Your computer has a high-performance graphics system, which can easily handle the demands of today's multimedia computing. Screen Controls Brightness Function keys can increase or decrease the brightness of the monitor. • + decreases the LCD panel brightness • + increases the LCD panel brightness Resolution 1. Click My Computer/Control Panel/Display/Settings. Click the Settings tab.
Chapter 2 — Getting Started 3. On your notebook, click the right touchpad button on the Windows desktop to open the desktop menu. Click Properties to open the Display Properties window. 4. In the Display Properties window, click Advanced in the Settings tab. Click the Display Modes tab. 5. Under Driver mode, you can select the appropriate options to change the display to an external monitor. 6. Adjustments to screen resolution and color depth can also be made in this dialog box.
Getting Started — The Graphics System Under Display Modes, there is a drop-down list with tow options: Single and Mirror. These options are described below. In Display Combination, there are two options Single available: VGA1 or LCD2. You can choose which device to apply as the Primary display. VGA1 is the default value for Primary if an external CRT is available. If an external CRT is not connected to the notebook, only LCD2 is available.
Chapter 2 — Getting Started Communication Components This system provides powerful communication functions, including built-in Fax/Modem, WLAN module and PCMCIA card slot. Fax/Modem/WLAN A phone jack on the left side of the computer allows you to connect to the Internet to send and receive data. When used with fax software, it can be used as a fax. When using this function, first plug the phone cord into the jack.
Chapter 3 Making Connections
Chapter 3 — Making Connections Making Connections Your computer is equipped with a full array of ports and connectors, including standard input/output (I/O) ports for quickly and easily adding peripheral devices such as printers, keyboards, and mice. Refer to documentation included with individual devices for details on connecting these devices to your computer.
Making Connections —Right Side Connectors 3. Fax/modem RJ-11 Jack The fax/modem can transmit data using the 56 Kbps V.90 protocol, and send and receive faxes at 14.4 Kbps. In some countries, local regulations may not permit the use of the fax/modem designed for this system. In this case, you may use a PCMCIA modem. 4. LAN RJ-45 Jack With the built-in Ethernet LAN combo, you can make LAN connections without installing PC cards. Connection speed is 10/100 Mbps.
Chapter 3 — Making Connections Front Side Connectors 1 2 1. Audio-out Jack Connect a stereo headset or external speakers to this jack to listen to multimedia. 2. Microphone-in Jack Connect a microphone this jack to record audio.
Chapter 4 System Software
Chapter 4 — System Software System Software Software List Operating System Your hard drive already contains all the software you need to operate the computer. Audio and Video Drivers These utility programs and drivers are included for the PC Card drive, the sound system, and the graphics sub-system. DVD Player Application The DVD player application will let you watch DVD movies on your notebook (for DVD-ROM module only).
System Software —System Recovery System Recovery Before you start Your system includes two Recovery CD-ROMs. Follow the steps in the appropriate section below to reinstall the operating system, the system software, or add a new hard disk. • The factory has pre-partitioned your system's hard disk, so you may directly install the system software; however, if you change a new hard disk, you must first partition it.
Chapter 4 — System Software Recovering Windows and Original Software If your Windows operating system is lost or damaged, use the Recovery CD (Windows). Enter BIOS setup. Set first boot device to “CD-ROM.” (See Chapter 6: BIOS Settings.) Put the Windows Recovery CD into the CDROM drive and reboot the computer.
System Software —System Recovery Partitioning the Hard Drive Hard drive is not partitioned. When the Microsoft Windows startup menu appears, select (2) Go to MS-DOS PROMPT. Press Enter to repartition your hard disk. At the A:\ prompt, type fdisk and press Enter. Note: If your computer is set to boot from the CDROM drive, “A” refers to your CD-ROM. If you see the message: “Do you wish to enable large disk support (Y/N),” Select “Y.” On the first screen select “Create DOS partition or logical DOS drive.
Chapter 4 — System Software Windows XP/ 2000 Pro. Reinstallation Enter BIOS setup. Set first boot device to “CD-ROM.” (See Chapter 6: BIOS Settings.) Put the Recovery CD for Windows XP/ 2000 Pro. Disc#1 into the CD-ROM drive and reboot the computer. When the Microsoft Windows XP/ 2000 Pro. Menu appears, choose option 1: Recovery CD for Windows XP/ 2000 Pro. When prompted, insert the Disc#2. It will take approximately five minutes to complete the installation.
Chapter 5 Power Management
Chapter 5 — Power Management Power Management Battery Calibration The first time you use a battery, you should calibrate it. The calibration process empties and charges the battery one time. This allows the Windows battery gauge to accurately monitor battery status. To calibrate a battery, follow these steps: 1. Plug in the AC adapter. 2. Restart the computer and when the startup screen appears, press Del key to enter the BIOS Setup Utility. 3.
Power Management —Monitoring Battery Power Monitoring Battery Power There are two ways to monitor how much power the battery has left. 1. Click start/Settings/Control Panel/Power Options; then click Power Meter. 2. Moving the cursor to the battery icon on the taskbar is the simplest way to check on battery power status. If you do not see the battery icon, enable it in Start/Settings/Control Panel/Power Options. Choose the Advanced tab and click “Always show icon on the taskbar.
Chapter 5 — Power Management • Save your work, then select Shut Down from the Start menu • Turn off or suspend the computer and replace the discharged battery with a charged battery (See Changing the Battery below). Do not restart the computer until you have connected to an AC adapter, or replaced the discharged battery with a charged battery. Battery Charging When you use the AC adapter to connect your Notebook to a power outlet, the internal battery will automatically begin to recharge.
Power Management —Power Saving Modes Standby All devices are powered up and in suspend mode except for the CPU clock. Hibernate Suspend to Disk is similar to turning off the computer, except that the current state of the computer is copied to the hard disk as a special file. When the computer returns from suspend mode, the desktop appears with the same files and programs open as when the computer was suspended.
Chapter 5 — Power Management Power Button Settings The function of the power button can be set to Shutdown or Standby in the Power Management Properties dialog box in the Windows Control Panel. However, holding the power button down for more than four seconds will force a power off while operating under any situation, resulting in the loss of any unsaved information. Power Saving Tips • Avoid operating the fax/modem, or audio and video applications when using battery power.
Power Management —Heat Considerations Heat Considerations The computer's processor has been specially designed to consume little power, and generates very little heat. However, working in a hot environment, or working for long periods may raise the temperature. Your computer takes the following steps to lower temperature: 1. The cooling fan will automatically turn on. You may feel air coming from a vent at the left side when this happens. 2.
Chapter 5 — Power Management 50
Chapter 6 Using the BIOS Setup Utility
Chapter 6 — Using the BIOS Setup Utility Using the BIOS Setup Utility Your notebook has a BIOS setup utility which allows you to configure important system settings, including settings for various optional functions of the computer. This chapter explains how to use the BIOS setup utility. BIOS Setup Menu The BIOS setup Utility allows you to configure your computer’s basic settings.
Using the BIOS Setup Utility —Navigating and Entering Information in BIOS Navigating and Entering Information in BIOS Use the following keys to move between fields and to enter information: Key Function Del Press Del to start the BI OS utility after turning on the computer. ESC Press Esc to exit any section. I f you wish to exit the BI OS utility without saving changes, go to the main menu, then press Esc.
Chapter 6 — Using the BIOS Setup Utility The Main Menu The Setup Utility menu bar has nine main screens: Standard CMOS Setup, Advanced CMOS Setup, Power Management Setup, Auto-Detect Hard Disks, Change User Password, Change Supervisor Password, Auto Configuration with Optimal Settings. Save Settings and Exit, and Exit Without Saving are used to exit the Setup Utility. AMIBIOS HIFLEX SETUP UTILITY – VERSION 1.38 (C)2001 American Megatrends, Inc.
Using the BIOS Setup Utility —Standard CMOS Setup Standard CMOS Setup The Standard CMOS Setup page of the Setup Utility has a list of fields that describe the basic configuration of your computer. CMOS is simply a type of random access memory, or RAM, used to store the basic configuration of the computer. AMIBIOS SETUP – STANDARD CMOS SETUP (C)2001 American Megatrends, Inc.
Chapter 6 — Using the BIOS Setup Utility Standard Feature Description Field Setting Function System Time Use these fields to set the time and date. The time is displayed in & Date 24-hour format. The date can be set from January 1, 1980 to December 31, 2099. The values set in these two fields take effect immediately. Type Shows type of system installed, including the following options: (Pri. Master) Auto, CD-Rom / DVD, No I nstalled, User; (Sec. Master) Auto, CD-Rom / DVD, Not I nstalled, User.
Using the BIOS Setup Utility —Advanced CMOS Setup Advanced CMOS Setup AMIBIOS SETUP – ADVANCED CMOS SETUP (C)2001 American Megatrends, Inc. All Rights Reserved 1st Boot Device CD/DVD Available Options: 2nd Boot Device USB FDD Disabled 3rd Boot Device HDD HDD S.M.A.R.T. for Hard Disks Enabled CD/DVD Password Check Setup Intel UNDI, TouchPad Support Enabled USB FDD Share Memory Size 32MB USB 1.
Chapter 6 — Using the BIOS Setup Utility Field Setting 1st Boot Device CD/ DVD 2nd Boot Device USB FDD 3rd Boot Device HDD S.M.A.R.T. for Hard Disabled Only S.M.A.R.T. Hard Disks are Enabled supported. The default is Disabled. Disabled I f you are using DOS or a 640 x 480 Disks Display Expansion Function 1st Boot Device default is USB FDD. 2nd Boot Device default is CDROM. 3rd Boot Device default is I DE-0. resolution to run windows, the display Support will not fill the entire screen.
Using the BIOS Setup Utility —Power Management Power Management This section of the BIOS manages` power settings in operating systems other than Windows 98 or above, or operating systems using ACPI power management. In Windows 98 or above, power management is controlled through the Power Management window in My Computer, and BIOS power management settings have NO effect. In other operating systems that use ACPI power management, BIOS settings likewise have no effect.
Chapter 6 — Using the BIOS Setup Utility Field Setting Panel off The LCD will turn off when the cover is closed. Suspend The LCD will turn off and the computer will enter suspend mode when the cover is closed. Enabled When AC adapter is not in use, the monitor is run in power-saving mode. Disabled The monitor does not go into powersaving mode. Disabled Batttery calibration is disabled. Enabled Battery calibration is endabled. Battery calibration will optimize the battery performance.
Using the BIOS Setup Utility —Auto-Detect Hard Disk Auto-Detect Hard Disk When Auto-Detect Hard Disk is selected, the BIOS will automatically detect Pri. Master and Sec. Master settings. AMIBIOS SETUP – STANDARD CMOS SETUP (C)2000 American Megatrends, Inc.
Chapter 6 — Using the BIOS Setup Utility Change User Password With a User password, you can enter the Setup Utility and change or remove the User password, but you cannot enter the Setup Utility and change or remove the Supervisor password, nor enable diskette access if it has been disabled. Change Supervisor Password A supervisor password must be set before a lower-level user password can be set. After selecting Change Supervisor Password, press Enter.
Appendix A Frequently A sked Questions
Appendix A — Frequently Asked Questions Frequently Asked Questions Q: My screen seems to time out too quickly. I have to constantly hit a key or move the mouse in order to bring it back. How can I adjust the screen time-out? A: This is part of Windows Power Management. Access Power Management by clicking on Start / Settings / Control Panel / Power Management. Adjust the display time-out by selecting a time next to the Turn off monitor option.
Appendix A — Frequently Asked Questions Q: There is feedback noise coming from my speakers. What can I do? A: Double click on the Speaker icon on the task bar. Then, under Microphone Balance, check the Mute box. Q: Because of a software problem, I was unable to shut down power normally. I pressed the power button to force a power off, but it didn't work. How can I force a power off? A: Make sure you press the power button for at least 4 seconds. Normally, this will force a power off.
Appendix A — Frequently Asked Questions 3. Select “Save Settings and Exit”. When you see the following prompt, choose and then press to restart your computer. Save current settings and exit (y/n)? Y 4. When you see the following sentence “FAN never Learned. Do it in BIOS Setup. Otherwise, Smart FAN function is invalid. Press F1 to Run SETUP” then press F1. 5. In the BIOS Setup Utility, select “Power Management Setup”, choose “FAN Auto Learning” then press .
Appendix B Statements
Appendix B — Statements Statements Federal Communications Commission Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Appendix B — Statements About The Modem This equipment complies with Part 68 of FCC rules. On the bottom of this equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment. If requested, this information must be provided to the telephone company. The modem jack of this equipment complies with Sub-part F of Part 68 of FCC rules.
Appendix B — Statements sending the message and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.) To program this information, refer to the manual of the communication software.
Appendix B — Statements z z EN 50371: 2002 EN 60950: 2000 UL CAUTION To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord.
Appendix B — Statements customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment.
Appendix B — Statements CLASS 1 LASER PRODUCT LASERSCHUTZKLASSE 1 PRODUKT TO EN60825 CAUTION: THIS APPLIANCE CONTAINS A LASER SYSTEM AND IS CLASSIFIED AS A "CLASS 1 LASER PRODUCT.” TO USE THIS MODEL PROPERLY, READ THE INSTRUCTION MANUAL CAREFULLY AND KEEP THIS MANUAL FOR FUTURE REFERENCE. IN CASE OF ANY TROUBLE WITH THIS MODEL, PLEASE CONTACT YOUR NEAREST "AUTHORIZED SERVICE STATION.” TO PREVENT DIRECT EXPOSURE TO THE LASER BEAM, DO NOT TRY TO OPEN THIS ENCLOSURE. FCC warning statement 15.
Appendix B — Statements caused by unauthorized modification of this device, or the substitution of the connecting cables and equipment other than manufacturer specified. It is the responsibility of the user to correct any interference caused by such unauthorized modification, substitution or attachment. Manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failing to comply with these guidelines.