Dual Screen Video Processor with Two DVI Inputs Model #: DVI-SPLITPRO-2B © 2010 Avenview Inc. All rights reserved. The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice.
Table of Contents Section 1: Getting Started ...................................................................................................................... 3 1.1 Important Safeguards ............................................................................................................ 3 1.2 Safety Instructions ................................................................................................................. 3 1.3 Regulatory Notices Federal Communications Commission (FCC) ..
Section 1: Getting Started 1.1 Important Safeguards Please read all of these instructions carefully before you use the device. Save this manual for future reference. What the warranty does not cover Any product, on which the serial number has been defaced, modified or removed. Damage, deterioration or malfunction resulting from: Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions supplied with the product.
1.3 Regulatory Notices Federal Communications Commission (FCC) This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. 1.4 Introduction The DVI-SPLITPRO-2B Dual Screen Video Processor is an advanced video processor for multimedia presentations.
www.avenview.
1.5 Package Contents Before you start the installation of the converter, please check the package contents. - 1.6 DVI-SPLITPRO-2B DVI – DVI & VGA breakout Cable VGA to Component breakout Cable DVI to VGA Adapter IR Remote Control Software CD DC 5V Power Adapter User’s Manual x1 x1 x1 x1 x1 x1 x1 x1 Before Installation Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction.
1.7 Panel Description The DVI-SPLITPRO-2B has four inputs and accepts both graphics and video signals, which come from computers and NTSC/PAL video sources respectively. There is a concept of main channel and sub channel for this device. You can pick up two of the four inputs, one is for main channel and the other is for sub channel, displays two of them simultaneously on the same screen. 1.7.1 DVI-SPLITPRO-2B Rear Panel 1 2 3 4 5 1. DVI/VGA OUT 2. DVI Input 2 3. Composite Input 4.
1.7.2 DVI-SPLITPRO-2B I/O Connectors Connectors Input Connectors Video Source DVI-IN 1 DVI-IN 2 Composite Output Connectors DVI-I OUT DVI VGA (DVI to VGA Adapter) Component (YPbPr) (DVI to VGA Adapter and VGA to Component Adapter) 1 x DVI 1 x VGA (DVI to DVI/VGA Y Cable) 1 x DVI 1 x Component (DVI to DVI/VGA Y Cable and VGA to Component Adapter) VGA Composite with a RCA Cable Display DVI Display VGA Display (DVI to VGA Adapter) 1 x DVI Display 1 x VGA Display (DVI to DVI/VGA Y Cable) www.avenview.
1.8 Installation To setup Avenview DV-SPLITPRO-2B follow these steps for connecting to a device: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14.
1.9 IR Remote Control DVI-SPLITPRO-2B ships with a compact remote control that allows for direct access to most commands used to control the video processor. 1. Power 2. PIP Border 3. UP Button 4. Source 5. Reset 6. Right Button 7. Menu 8. Left Button 9. Logo 10. Exit 11. Down Button 12. Enter 13. Blank 14. Color 15. Auto 16. V Flip 17. H Flip 18. SWAP 19. PIP 20. Sub Pause 21.
1.10 On Screen Display Menu www.avenview.
Main Source: Main Control: Select an input source for the main channel (VGA / YPbPr, DVI, Composite, VGA) Brightness (Slider) Display Image Position Color PIP Control Logo Border Sub Source: Sub Control: OSD Control: Language Selection: Factory Reset: Resolution Selection: Contrast (Slider) Saturation (Slider) Scaling (1:1, Fill, Aspect, Panorama) Adaptive De-interlacing (Button: Off, Level 1, Level 2, Level 3) Noise Reduction (Button: Off, Low, Med, High) Zoom(Button: In, Out) Hue (Slider) Flesh-t
1.11 System Requirements 1. 2. 3. The DVI-SPLITPRO-2B provides a software control program which runs under Microsoft Windows 98, 2000, XP, VISTA through the interface of RS-232 serial control. Before you click on the icon of the software, make sure you have secured the connection between your computer COM port and the DVI-SPLITPRO-2B. The DVI-SPLITPRO-2B provides software control.
4. While you move the mouse’s cursor near the borders, in either red or blue, the icon of the cursor will change as the figure below. www.avenview.
1.13 Software Operation File Connect Save Settings Load Settings IR Control Auto Sleep Device ID Factor Reset Exit Synchronizes the status of the DVI-SPLITPRO-2B with that of the software, especially after IR commands sent. Save current user preferred settings such as the positions and sizes of the videos, the width or color of border etc. into your favorite setting files.
Background Resolution Layout H-Flip V-Flip SWAP Color Custom Size 1-3 Change the output resolution The preset layout for main & sub channels Horizontally flip the output video Vertically flip the output video Swap the main the sub channel The background color selection Save or read main/sub channel size, position, visible and Layer. Main Input Source Visible Border Label Layer Pause Full Screen Color Balance Auto Config.
Sub Input Source Visible Border Label Layer Pause Select a video/graphic input of the sub-channel Display the Sub-Channel or not Display the sub-channel’s border Display the sub-channel’s label. Users can define the content of the label This will make the sub-channel overlays the main channel Freeze the display of the sub-channel www.avenview.
1.14 Control Setting Dialog Border Select main or sub channel for further settings Clear All Apply Border Color Border Width Border Type Clear all OSD items Apply the settings Setup border’s color by clicking on “Color Settings” Input border’s width The placemat of border has three types: Inside means the added border is fully inside the video. Outside means the added border is completely outside the video and this added border can overlay the other video input.
Image 1. Choose the scaling type for the main channel at fully screen display 2. While Blend is selected, users can use the slider to control the control the degree of blending Color 1. Select the main or sub channels 2. Reset: Restore all the setting on this page back to their factory default settings. www.avenview.
Zoom 1. Select the main or sub channel 2. Default: Restore the selected channel without zoom effect 3. Slider controls the ratio of zoom. 4. The workplace for controlling the displayed area after zooming the selected video. Pattern 1. While the “Pattern Model” is chosen, the output will display the selected pattern. While unselecting this item, the output display works normally. 2. The organ border indicates which pattern is currently selected.
HS/VS Delay 1. Select the main or sub channel 2. The fine movement of the selected channel 1. Save: Save the read back EDID Content in PC 2. Setting: Automatically setup the output resolution according to the content of EDID Zoom *This setting is according to the content of EDID, and the optimum resolution for the monitor might be different because of limited information of the acquired EDID info. www.avenview.
Section 2: Specifications Item Unit Description Dual Output Support Video Bandwidth Supported Resolutions Audio Support Control Embedded Video Mixer Ability to Cascade Input TMDS Signal ESD Protection Input Output DVI Connector Type VGA Connector Type RS232 Connector RCA Connector RJ45 Connector IR Remote Control Dimensions Power Supply Power Consumption Operating Temperature Storage Temperature Relative Humidity Description DVI-SPLITPRO-2B Dual Screen Video Image Processor Yes (DVI OR VGA) DVI Single Link
2.1 Supported Resolutions 2.1.
2.1.3 DVI-OUT Supported Mode Resolution Supported Mode (HDTV) 720p 1280x720 @50Hz VESA 1366x768 @60Hz (HDTV) 720p 1280x720 @60Hz VESA 1400x1050 @60Hz (HDTV) 1080p 1920x1080 @60Hz VESA 1400x1050 @50Hz VESA 640x480 @60Hz VESA 1152x864 @75Hz VESA 800x600 @60Hz VESA 1600x1200 @60Hz VESA 1024x768 @60Hz VESA 1920x1200 @50Hz VESA 1152x864 @75Hz VESA 1920x1200 @60Hz VESA 1280x1024 @60Hz 2.
Notice 1. If the DVI or HDMI device requires the EDID information, please use EDID Reader/Writer to retrieve and provide DVI/HDMI EDID information. 2. All HDMI over CAT5 transmission distances are measured using Belden 1583A CAT5e 125MHz LAN cable and ASTRODESIGN Video Signal Generator VG-859C.3 3. The transmission length is largely affected by the type of LAN cables, the type of HDMI sources, and the type of HDMI display.
Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc.