USB HARD DISK DRIVE UHP900 Mass Storage Disk User Manual Version 1.
Introduction Thank you for purchasing our USB HARD DISK DRIVE (UHP900) – Mass Storage Disk. This user guide will explain how to use this Hard Disk Drive and how the application software bundled with your device. Please read this manual carefully before using this product. Parts Description LED Display USB Interface USB Interface: The USB interface is to connect the USB port of the computer. LED Display: The LED Display will show the status of the device.
Driver Installation & Functions Install Driver (For Windows 98SE only) Windows 98SE will not recognize the USB Hard Disk Drive until you have installed the driver using the included installation CD-ROM. Follow the detailed instructions in this section to activate the USB mass storage function, so you will be able to transfer files from your computer to your USB Hard Disk Drive. a. Plug the USB Hard Disk Drive into the USB port of your computer. Then insert the CD-ROM into the CD Drive.
c. Click on the “CD-ROM drive” box. If the path of the installation driver is stored in another destination, please specify a location. Then click “Next” to continue. d. Windows will find the driver for the device from the path provided. Click “Next” to continue.
e. Once the installation is completed, click “Finish” to exit. f. Window will prompt for restart the computer. Click “Yes” to restart. g. After installation completed, the “Storage Adaptor” will be added to Device Manager.
h. The new Hard Disk will be added to My Computer. Warning: Before disconnecting the USB Hard Disk Drive, please make sure the “Safe Remove Hardware” procedure is followed. Double click the “Safe Removal” icon on the task bar; the “Safely Remove Storage Adapter Bridge Module (CY)” will pop up. Click on it to stop the device. Now you can unplug the device from the USB port of your computer.
Plug & Play (For Windows ME, 2000, XP and Mac OSX) These versions of Windows or Mac system will automatically detect your USB Hard Disk Drive after connection with USB port is established. When you plug the device into the USB port of your computer, a “Local Disk” icon will be shown in the My Computer. Warning: To unplug the USB Hard Disk Drive, you have to follow the Safely Remove Hardware Procedure: Windows ME, 2000 and XP users: a. Double click on the “Safely Remove Hardware” on the task bar. b.
d. When the message box appears [The “USB Mass Storage Device” can now be safely removed from the system] on the task bar area, you can remove the device from the USB port of your computer. Mac OSX users: Drag the icon from the USB Hard Disk Drive to the trash icon. Wait until the USB Hard Disk Drive icon disappears from the desktop. Now you can disconnect the USB Hard Disk Drive from the USB port of your computer.
Safety Precautions Please read the safety precautions carefully before using the USB Hard Disk Drive (“the product”) and the application software. Follow the procedures in this guide when using this product. The following safety precautions are intended to remind you how to operate the product safely and correctly. Please read and ensure that you understand them.
System Requirements The following system requirements must be met to install and operate the product and the application software. Computer Model IBM PC/AT Compatible OS Windows 98 Second Edition, Windows Millennium Edition (Windows ME), Windows 2000, Windows XP and MAC OSX. Interface USB Windows 98SE does not support default Mass Storage Driver. You have to install the driver bundled with the product. The product can use the default driver in most of the OS.
