User's Manual

ManualsBrandsAvantronics ManualsElectronicsBluetooth Stereo Handsfree Car Kit

1. Product description

Avantree Cara is a Bluetooth stereo handsfree car kit. It integrates your phone with

a car audio system wirelessly. You can plug it directly into a vehicle’s AUX input for

handsfree calls and streaming audio. It is elegant, easy to use, and has high quality

stereo music support. It incorporates the latest Bluetooth technology (V4.0), echo

and noise cancellation, as well as high definition music apt-X technology. It supports

multiple devices at the same time, and is small, easy to carry and rechargeable. It can

also be used with any speaker as a handsfree speakerphone in the office, at home, etc.

–

2. Product overview

① LED indicator

② Microphone

③ MFB button (Multi-Function Button)

④ Power switch

⑤ Micro USB charging socket

⑥ 3.5mm audio output socket

②

⑤

①

④

③

⑥

What’s in the box: - （可以用图片代替）

 Avantree stereo handsfree car kit (Cara)

 Magnetic base

 Aux 3.5mm audio cable

 Aux 3.5mm audio extension cable

 Micro USB charging cable

 USB car charger

 User manual

 Warranty card

3. Charging the car kit

First time, please charge Cara for around 3.5 hours to make sure it is fully charged and

the battery reaches its full capacity:

 Charging in car: Charge the unit in car by using a car charger.

 Charging at home: Charge the unit by using a USB cable via PC.

Afterwards, each charge cycle may take up to 3 hours.

LED will indicate red when charging and off when charging is complete.

If you have not used the device for a few months, it may take 15-30 minutes before the

LED turns red when charging.

–

We suggest fully charging the item at least once every two months.

Note: to prolong durability of battery, it is recommended to charge the unit whenever

low battery is encountered (LED will flash red every 0.5 secs.).

4. Setting up your stereo handsfree car kit

1) Place the Cara:

 Find a smooth and flat surface on the dashboard in front of you that is within

easy reach but will not interfere with driving. For best voice pick-up, it should

be as close to your mouth and as directly in front of you as possible. See

below the image for some recommended areas:

 Make sure the surface is dry and free of dirt.

 Stick magnetic base to the dashboard.

 Cara can be easily removed and stored when not in use.

2) Insert the audio cable into Cara 3.5mm audio output socket and your car’s AUX port.

If the cable is too short, use the extension cable included in the package.

Turn on your car stereo and set the input source to AUX.

Turn on Cara and pair with your phone. After that you can use the stereo car kit.

5. Turning the car kit On/Off

1) Power on:

 Slide the “Power” switch to “On” to turn on the car kit.

 It will enter pairing mode if it has not detected any connection within 30 secs.

 If the pairing can’t be completed within 2 minutes after the pairing mode is

activated, the car kit will enter standby mode.

2) Power off:

 Simply slide the “Power” switch to “Off” to turn off the car kit.

6. Pairing/connecting (Tutorial online)

Summary of content (3 pages)

PAGE 1
. Product description 2. Product overview Avantree Cara is a Bluetooth stereo handsfree car kit. It integrates your phone with a car audio system wirelessly. You can plug it directly into a vehicle’s AUX input for handsfree calls and streaming audio. It is elegant, easy to use, and has high quality stereo music support. It incorporates the latest Bluetooth technology (V4.0), echo and noise cancellation, as well as high definition music apt-X technology.
PAGE 2
It is important to pair the Bluetooth car kit with your Bluetooth phone for first time use. Pairing procedure: 1) Get the car kit into pairing mode:  Once turned on, the car kit will automatically go into pairing mode if it has not detected any connection.  Under standby mode, you can also go into pairing mode by pressing and holding the “MFB” button until the LED blinks alternatively blue and red. 2) Activate Bluetooth on your phone, and search for Bluetooth devices.
PAGE 3
10. Product specification             11. Safety Information Bluetooth compliance specifications: V4.0 Operating frequency band: 2.4GHz ~ 2.48GHz unlicensed ISM band Output power: Class 2, up to 10 meters Support profiles: HSP, HFP, A2DP and AVRCP Support decoder: apt-X, SBC, MP3 and ACC Supports multipoint A2DP connection to two phones. Stand-by time: up to 640 hours/ 27 days. Talk time: up to 10 hours Play music time: up to 8 hours Battery charging time: about 3 hours Charger voltage: DC5.