User's Manual

ManualsBrandsAvantronics ManualsAudio EquipmentBluetooth Headset

1. Product Description

Avantalk Jogger (AS6) is a lightweight sport headphone with in-ear drivers, it features with fashionable sport design, water resistant and

decent stereo sound.

Jogger is the ideal choice for active pursuits such as jogging and exercising.

2. Product Overview

(1). Speaker

(2). Next

(3). Led Indicator

(4). Previous

(5). Headband

(6). Charging Socket

(7). Multi-Function Button(MFB)

(8). Microphone

(9). Volume Down

(10). Volume Up

What’s in the box:

 Avantalk Jogger

 USB charging cable

 Manual

 Warranty card

 Carry pouch

Optional:

 Travel /car charger/Armband

3. Charging

Avantalk AS6 uses a popular USB charging socket.

1) First time, please charge the device for no less than 2 hours to make sure the headset is fully charged and the battery reach its full

capacity.

2) Afterwards, each charge cycle may take 2 hours around.

3) LED will indicate red in charging and off when charging is complete.

4) If you have not use the item for a few months, LED might not turn red when first charging. It might take 15-35 minutes before the

LED turn red.

Notice:

 When battery power is low, the red indicator light will flash red every 15 seconds.

4. Turn On / Off

Turn On: From OFF, press and hold the “MFB” around 4 seconds until the indicator LED show Blue.

Turn Off: From On, press and hold the “MFB” around 4 seconds until the indicator LED show red.

5. Working with mobile phone (Tutorial online)

It is important to pair the headset with your Bluetooth Mobile phone for the first time use.

5.1 Pairing procedure :

A. Ensure the headset is off

B. Press and hold the MFB button for 7 seconds until LED blink blue and red alternatively.

C. Search the device from your phone ;

D. Once found “Avantalk Jogger’’, follow the steps and enter pin code 0000 to pair (some device does not request the pin code);

E. Connect the headset to the device.

F. Headset is ready for use now.

Once paired and connected, the headset will be automatically connected to the device whenever you turn the headset on again, provided

the device is in the range.

We found most of the online technical support questions are caused by improper pairing between the headset and the Bluetooth device.

Please follow the instruction step-by-step.

Summary of content (3 pages)

PAGE 1
. Product Description Avantalk Jogger (AS6) is a lightweight sport headphone with in-ear drivers, it features with fashionable sport design, water resistant and decent stereo sound. Jogger is the ideal choice for active pursuits such as jogging and exercising. 2. Product Overview (1). Speaker (2). Next (3). Led Indicator (4). Previous (5). Headband (6). Charging Socket (7). Multi-Function Button(MFB) (8). Microphone (9). Volume Down (10).
PAGE 2
5.2 Basic Operations: Answering a call: press the “MFB” button once to answer the call. Ending a call: press the “MFB” button to end a call. ● Reject a call: press and hold the “MFB” button for 3 second to reject the call.
PAGE 3
   Use only supplied and approved charger. Replacement or service must be done by qualified service center or manufacturer. Unplug this device when unused for long periods of time or during lightning storms. CAUTIONS: ELECTRIC SHOCK HAZARD The battery used in this device may present a risk of fire or chemical burn if mistreated. 9. Declaration of Conformity 9.1. FCC Statement This device complies with part 15 of the FCC Rules.