User Manual

ManualsBrandsAvantree ManualsHeadphonesHT41899

User Manual

Two-headphones

Wireless TV Set

HT41899

AUX OPT

FS APTX

SBC

USB

What’s in the box? ··································································································································································1

Product overview····································································································································································1

Turn on & connect HT41899················································································································································3

Reconnect··················································································································································································2

Connect transmitter to your TV/audio source···············································································································3

Check your TV/Audio Source output options········································································································4

If your TV has Digital Optical Out·······························································································································4

If your TV has Headphone (3.5mm) Out··················································································································5

If your TV has Red/White Audio Out (RCA- only for TV)······················································································5

If your Receiver has 6.35mm phone jack at front·································································································6

Use with your PC/Laptop ·············································································································································6

Use the headphone independently with cellphone ···································································································7

Clear paired history ································································································································································8

Headphone charging ····························································································································································8

Troubleshooting······································································································································································8

BLACK headphone fails to reconnect to the transmitter···················································································8

Cannot adjust volume on headphone·····················································································································9

Summary of content (10 pages)

PAGE 1
User Manual Two-headphones Wireless TV Set HT41899 US SB C B FS AU AP X TX OP T LL What’s in the box? ··································································································································································1 Product overview····································································································································································1 Turn on & connect HT41899···························
PAGE 2
What’s in the box? 1 2 Headphone 1 (BLACK) Headphone2 (RED) 5 Optical audio cable 3 4 Transmitter Dual headphones stand 6 7 8 9 AUX 3.5mm audio cable AUX 3.
PAGE 3
ON/OFF / Power ON/OFF – Slide to ON/OFF position Pairing – Hold or for 3-5 seconds Dual headphones stand 1. Assemble metal stand onto base 2. Assemble hanger onto metal stand R R Turn on & connect HT41899 Powering up transmitter Connect the transmitter to a power source. The power source can be either a TV USB port (TV must be ON to provide power) or any 5V/500mA-2A rated USB charger (e.g. your phone charger should work).
PAGE 4
Turn on BOTH headphones - Press and hold the MFB up and starts flashing (about once every 2 seconds). on the headphone until the BLUE LED lights For the Black headphone, it will always auto reconnect to the transmitter, close to on the transmitter and LED on the BLACK headphone will both turn solid BLUE, indicating that they’ve successfully connected. USB AUX OPT SBC FS APTX LL Connected Turn SOLID BLUE Turn SOLID BLUE For the RED headphone, click MFB once to reconnect to the transmitter.
PAGE 5
headphone flash RED and BLUE alternately. Keep them together and wait for a few seconds, close to solid BLUE, indicating that they’ve successfully connected. on the transmitter and LED on headphone will turn Connect transmitter to your TV/audio source Check your TV/Audio Source output options HT41899 works with OPTICAL output, AUX 3.5mm output, and RCA (labeled “AUDIO OUT”) output. If your TV has Digital Optical Out Please use the Optical cable to connect the transmitter and TV.
PAGE 6
Now you can stream audio from your TV. Note: If you don’t know how to change the settings on your TV, or if you cannot hear anything through the headphone after changing the settings, please contact your TV manufacturer for support. Unplug any device from the 3.5mm AUX jack while using the OPTICAL out.(If anything is plugged into the AUX jack, the transmitter will default to the AUX signal and ignore any OPTICAL input). If your TV has Headphone (3.
PAGE 7
Note: If there is no sound playing from headphone, please set the Sound Out / Speaker setting on your TV to “External Speaker”. Ensure use TV Red/White ports labeled “ AUDIO OUT ”, other Red/White ports are incorrect. If your Receiver has 6.35mm phone jack at front PHONES PHONES 6.35mm to 3.5mm Converter (purchase separately) Micro USB power cable 3.5mm audio cable Please do NOT use the RED/WHITE ports on the back of your AV receiver, they may permanently damage the transmitter.
PAGE 8
Avantree Audikast Plus For Skype audio settings, please select “Avantree Audikast Plus” for both Speakers and Microphone. Avantree Audikast Plus (Avantree Audikast Plus) (Avantree Audikast Plus) Use the headphone independently with cellphone Headphone can be separately used with cell phone, please follow the step-by-step instruction below： · Ensure the transmitter is off.
PAGE 9
· Turn on Bluetooth on your smart phone/tablet. Find & select “Avantree AS9S” to pair and connect. Settings Bluetooth Bluetooth Devices Avantree AS9S The next time, you want to use your headphones in this way you will need to select “ Avantree AS9S” on your smart phone /tablet to reconnect.
PAGE 10
Step 2 -Press and hold PINK for 5 seconds. for 10 seconds to LOCK them, once successfully locked, close to lights up Cannot adjust volume on headphone Click +/- to raise or lower volume. 1) Do not click the button too fast; 2) do not press and hold the button . One will hear “beep” when the volume reaches maximum. More FAQs on https://avantree.