User Manual

ManualsBrandsAvantree ManualsHeadphonesAudition

Table Of Contents

User Manual

NFC Bluetooth

Stereo Headphones

BTHS-AS9

Overview ····················································································································· 1

Basic Operation ········································································································· 1

Connect to a Bluetooth device ············································································ 1

Connect to two Bluetooth devices simultaneously ····································· 2

Connect with NFC enabled mobile phone ····················································· 2

Use as a wired headphone ···················································································· 2

Status of LED Indicators ························································································· 3

Charging ······················································································································ 3

Reset ······························································································································ 3

Troubleshooting ······································································································· 4

Summary of content (5 pages)

PAGE 1
User Manual NFC Bluetooth Stereo Headphones BTHS-AS9 Overview······················································································································ 1 Basic Operation·········································································································· 1 Connect to a Bluetooth device············································································· 1 Connect to two Bluetooth devices simultaneously······································ 2 Connect
PAGE 2
NFC Overview NOTE: All accessories are also available on avantree.
PAGE 3
STEP 3 Activate Bluetooth on your phone and select “Avantree Audition”. Connect to two Bluetooth devices simultaneously STEP 1 Connect headset with the first phone as above. Then Turn off the headset. STEP 2 Connect headset with the second phone as above. STEP 3 Tap and select “Avantree Audition” on the first phone to connect it. STEP 4 Now the headset has connected with the two phones simultaneously.
PAGE 4
NOTE: The buttons and microphone on the headphones will not work under this situation. Status of LED Indicators Indicator light Flashes Blue and Red alternately Flashes Blue once every 7 seconds Flashes Blue twice every 10 seconds Red solid Flashes Red once every 10 seconds Headphones Status Ready to pair Connected NOT connected Charging Low battery Charging When the LED blinks red, you should recharge your headphones.
PAGE 5
pink).Now your Audition has been restored to its default settings. After powered on again, it will enter pairing mode directly. Troubleshooting • No sound withPC? - Set Avantree Adition as the default device or output device on the PC. - When using Adition to make VOIP calls through apps, please set Adition Hands-Free as Microphone and Speakers device.