User Manual

Avantree
Audition
NFC
- 1 -
- 2 - - 3 -
- 4 - - 5 -
1. Headset overview
NOTE: All accessories are also available on avantree.com
2. Connect with mobile phone
STEP 1 Turn Audition off (press and hold MFB button for 2s).
STEP 2 Press and hold MFB button for 5-7s until LED indicator flashes
blue and red alternately.
STEP 3 Activate Bluetooth on your phone and select “Avantree Audition”.
3. Connect with two mobile phones simultaneously
STEP 1 Connect headset with the first phone as above. Then Turn off the
headset.
STEP 2 Connect headset with the second phone as above.
STEP 3 Tap and select “Avantree Audition” on the first phone to connect it.
STEP 4 Now the headset has connected with the two phones simultaneously.
4. Connect with NFC enabled mobile phone
STEP 1 Make sure NFC function is turned on from your phone and that the
screen is active and unlocked.
STEP 2 Hold the NFC mobile phone against the NFC zone of the headset (the
NFC logo).
NOTE: Since NFC antenna is located in different position of phone, it is helpful to
know the position for fast pairing. For details on NFC, see your phone’s user
manual.
5. Connect with non Bluetooth enabled devices
When the device is not Bluetooth enabled, or battery of headset is low, you can
use the 3.5mm audio cable to stream music, just connect the cable to the device.
NOTE: The buttons and microphone on the headphones will not work under this
situation.
- 6 - - 7 -
- 8 - - 9 - - 10 -
6. Connect with PC/notebook
STEP 1 Turn Audition off (press and hold MFB button for 2s).
STEP 2 Press and hold MFB button for 5-7s until LED indicator flashes blue
and red alternately.
STEP 3 Activate Bluetooth on your PC/notebook and select “Avantree Audition”.
NOTE: Make sure PC/notebook is Bluetooth enabled and supports A2DP profile,
otherwise you may need a Bluetooth audio adapter to add the feature on
PC/notebook that do not. For details on how to set up with PC/notebook, please
see support.avantree.com.
7. How to use
Micro USB charging cable
3.5mm audio cable
8. How to charge
When the LED blinks red, you should recharge your headphones. Please
remove the micro-USB protector and charge the headphones via the supplied
USB to AC adapter or PC USB port. It normally takes about 3 hours to fully
charge the battery. The LED will stay red when charging and will turn off when
charging is complete.
NOTE: AC adapter requirement 5V / 500mA-2A.
9. How to restore Audition to Default Settings?
You may need to reset your Audition if it’s not working as expected. Under
standby mode, press and hold “V+” and “V-” for about 7 seconds until the
indicator flashes blue and red together very quickly about 2 times (seems pink).
Now your Audition has been restored to its default settings. After powered on
again, it will enter pairing mode directly.
10. Product specifications
Bluetooth version: 4.0
Support profiles: Headset, Handsfree, A2DP, AVRCP
Operational range: Class 2, 10 meters
Battery: rechargeable lithium battery
Talk time: up to 50 hrs
Music time: up to 40 hrs
Standby time: up to 20 days
Headset weight: 180g
Headset size: 170mm(W)x180mm(H)X80mm(D)
NFC
NFC
On/Off Press and hold MFB 2s
Answer a call Press MFB once
End a call Press MFB once
Reject a call Press and hold MFB 1s
Redial last number Double click MFB
Voice Dial / Command Short press “V+” and “V-”
Play music Press MFB once
Pause music Press MFB once
Volume up Press “V+” once
Volume down Press “V-” once
Next track Press and hold “V+”
Previous track Press and hold “V-”
V −
V +
“ V+ ” “ V− ”
V −
V +
NFC
NFC
NFC
Micro USB cable
www.avantree.com
User Manual
NFC Bluetooth Stereo Headphones
NFC
Audition