Bluetooth Stereo Headphones User Guide Audition
1. Product Description Avantree Audition is the latest Bluetooth 4.0 stereo headphones with microphone from Avantree family. It features with over the ear design which will be much more comfortable. With NFC function, you can touch your phone to it and the headphones will turn on, connect or disconnect. They are light weight and stylish. The buttons on the ear cup allow you to play and pause your music streaming, receive calls, adjust the volume etc.
2.
3. Charging Avantree Audition uses universal micro charging socket. USB charger requirements: 5V/500mA-2A 1) Each charge cycle will take about 3 hours. 2) The LED will indicate red when charging and will turn off when charging is complete. Note: When battery power is low, the LED indicator will flash red and you will hear a beep sound every one minute. 4. Pairing It is important to pair the headset with your Bluetooth enabled device (such as mobile phone, tablet etc.) for first time use.
We take Bluetooth enabled mobile phone as example. NFC pairing A. Turn on NFC function from your phone. B. Let your phone tap NFC location of the headphones until your mobile phone give an indicate note. (Some phones will vibrate and some will have a beep sound.) C. Then your phone will get a reception request if you would like to pair with the headphones for the first pairing time. D. Tap “Yes”, then your mobile phone will connect with Audition. E. Tap it again to turn the headphones off.
D. Once “Avantree Audition’’ is found in the search list, follow the indicated steps to pair (some phones may request the pin code “0000”). E. Connect the headset to your phone. F. Your headset is now ready for use. Turn on: From off, press and hold “MFB” for around 4 seconds, until the LED indicator shows blue. Note: Once paired and connected, the headset will be automatically connected to your phone whenever you turn the headset on again, provided your phone is within range.
Pairing with two mobile phones A. From off, press and hold button MFB for 7-10 seconds until the LED indicator blinks blue and red alternately, then pair with the first phone as per normal. B. Then turn it off, press and hold MFB button again until the LED indicator blinks blue and red again, then pair with the second phone in the normal manner. C. Power off the headset, and then turn it on again. It will automatically connect with the last paired phone, and please connect with the first phone manually.
● Last number redialing: In standby mode, double click “MFB” button. ● To switch a call between headset and mobile phone: During a call, press and hold “MFB” for 3 seconds to transfer the call. ● To Mute & Unmute during a conversation: Press and hold the “V+” button until you hear a short beep. In mute status, you will hear two short beeps every 3 seconds. To unmute the microphone, press and hold the “Next” button again until you hear a further short beep.
To Play Music : Press the “MFB” button. Pause : Press the “MFB” button again. Previous Track: Short press the “V-” button. Next Track: Short press the “V+” button. Notes: Some functions are dependent on the mobile phone being used with the headset. Therefore, certain features might not work with all phones as some phones do not support them. 5.2 Advanced Operations - Multipoint 5.4.
To end the currently active call and switch to the other call, short press the “MFB” button once. 6. Working with a PC or Laptop For computers running Microsoft Windows with Built-in Bluetooth supporting A2DP. For other systems, you might need a Bluetooth dongle to work with your computer. Your Bluetooth headset doesn’t need any special drivers to set up. For any updated driver information, please refer to your computer manufacturer or to the dongle manufacturer. 6.1 Pairing procedure: A.
E. Your headset is now ready for use. 6.2 Streaming Music Before streaming music, you need to change the sound settings. Go to “Control Panel” – “Sound” – “Playback” and change the audio setting to “Bluetooth Stereo Audio”. 6.3 For Skype Calls Some systems can change the required sound settings automatically and you can make Skype calls immediately. Other systems will need changes to the sound settings before you are able to make Skype calls. Go to “Skype Tools” – “Options” - “Sound Devices”.
Support profiles: Headset, Handsfree, A2DP, AVRCP Operational range: Class 2, 10 meters Battery: 450mA rechargeable lithium battery Talk time: up to 50 hrs Music time: up to 40 hrs Standby time: up to 20 days Headset weight: 180g Headset size: 170mm(L)x180mm(W)X80mm(H) The talk and standby times may vary when used with different mobile phones or other compatible Bluetooth devices and are also dependant on different usage styles, settings and operating environment.
8. Safety Information To avoid any damage to or malfunction of the device, do not drop it from high places. Keep this device away from water, other liquids or high humidity environments. If the device is exposed to water, other liquids or excessive moisture, do not operate it. This will avoid risk of electrical shock to yourself and risk of explosion or further damage to the device.
CAUTIONS: ELECTRIC SHOCK HAZARD The battery in this device may present a risk of fire or chemical burns if mistreated. 9. Declaration of Conformity 9.1. EU This product is CE certified according to the provision of the R&TTE Directive (99/5/EC). We declare that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. 9.2. Trademark Statement The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc.
10. Warranty Please refer the warranty card included in the pack.
