U-3000 Reader Avante International Technology, Inc.
CONTENTS U-3000 Reader 2011 Safety & General Information........................................................................................................................................3 Cautions & Warnings .................................................................................................................................................3 RF Specifications ...................................................................................................................................
SAFETY & GENERAL INFORMATION U-3000 Reader 2011 Use the following to ensure the antenna & device installation is compliant with RF safety exposure requirements CAUTIONS & WARNINGS Please read the following cautions and warnings for safe operation. - Follow all safety electrical rules to avoid personal injury to self or others. - Established & connect a ground point to the device prior to turning the unit on. - Follow ESD (Electro Static Discharge) guidelines.
FCC & IC STATEMENTS Device Name Model Number FCC ID UHF Reader U-3000 U-3000 QJZ-U3000 U-3000 Reader 2011 IC 9611A-U3000 FCC STATEMENT AND CAUTION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
U-3000 Reader 2011 3. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
U-3000 Reader 2011 INTRODUCTION The UHF-900 Reader is a passive RFID card reader capable of handling up to four antenna connections for multi-switch reading mode. A LCD screen and simple keypad are available for easy user operation. Data ports are located on the bottom of the reader and these include 1 power port, 1 power ON/OFF switch, 1 SD card slot, 1 Ethernet port, and 1 USB port.
U-3000 Reader 2011 EPC GEN2 The EPC GEN2 menu item will allow for interaction with tags or cards within the detectable range. The inventory of tags will continuously be update as tags or cards are detected. TAG INTERACTIONS To interact with tags or cards, do the following: 1. Use the up or down arrow key to highlight any detected tag or card, then 2.
U-3000 Reader 2011 (The EPC, Bank Num, Block, and Data fields have been explained in the previous section. However, here the Block field can contain numbers in the range of 00 to 19. In addition the data field is changeable to any combination of letters and numbers) To change the Data field, use the change a character, use the Right arrow key (#) to move to the Data field.
U-3000 Reader 2011 SYSTEM SETTING The System Setting menu item will allow access to detail settings for proper system functionality. Date & Time RF Switch Display Time Clear Flash Save Time Set Frequency Set Power Sensitivity Net Config DATE & TIME The Date & Time menu item allows for setting of the system’s date and time. To change the date, do the following: 1.
U-3000 Reader 2011 1. Press the OK key when the Manual option is highlighted 2. Use the up or down arrow key to select an antenna port (RF-1, RF-2, RF-3, and RF-4). Then, press the OK key to set the antenna port; the antenna port light will light up, indicating that it is ready to listen. To set the unit to switch and listen at all four antenna ports, do the following: 1. Press the OK key when the Automatic option is highlighted.
U-3000 Reader 2011 SAVE TIME The Save Time menu item allows for recording the time when a record is saved to the flash memory. This allows repetitive records to be saved when the same card is detected. To set the Save Time, do the following: 1. Press the OK key when the Save Time option is highlighted. The time format is as follows: XX sec (Where the characters can be numbers and the unit is in seconds) 2. Use the Left arrow key (*) or Right arrow key (#) to move to the character you wish to change.
U-3000 Reader 2011 (Where the “To” and “From” characters are numbers and the unit is in MHz. The Ratio characters are numbers and the units are in Percent) 2. Use the Left arrow key (*) or Right arrow key (#) to move to the character you wish to change. Then, use the keypad to enter a number; once a character is changed, the cursor moves to the next character. Press on the OK key to save the changes; a “Waiting” message will appear on-screen. Then a “list 00/00” title will appear on the top of the screen.
1. U-3000 Reader 2011 Press the OK key when the Net Config option is highlighted. The network configuration is displayed as follows: MYIP MASK GW SRV XXX.XXX.XXX.XXX XXX.XXX.XXX.XXX XXX.XXX.XXX.XXX XXX.XXX.XXX.XXX PORT XXXX (The MYIP, MASK, GW, and SRV characters can be numbers from 0 to 255. And the PORT characters can be numbers from 0 to 9999. In addition, MYIP is your current IP, MASK is the mask IP, GW is the gateway IP, SRV is the server IP, and PORT is the communication port) 2.
