RiTab-10T1 10” Semi-Rugged Tablet Quick Reference Guide 1st Ed – 01 April 2016 Copyright Notice Copyright 2016 Avalue Technology Inc., ALL RIGHTS RESERVED.
RiTab-10T1 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Quick Reference Guide (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
RiTab-10T1 Disclaimer Avalue Technology Inc. reserves the right to make changes, without notice, to any product, including circuits and/or software described or contained in this manual in order to improve design and/or performance.
Quick Reference Guide easily find answers in your product documentation. These answers are normally a lot more detailed than the ones we can give over the phone. So please consult the user’s manual first. To receive the latest version of the user’s manual; please visit our Web site at: http://www.avalue.com.
RiTab-10T1 Content 1st Ed – 01 April 2016 ....................................................................................................... 1 1. Getting Started ........................................................................................................ 8 1.1 1.2 1.3 1.4 Safety Precautions .................................................................................................... 8 Packing List .....................................................................................
Quick Reference Guide 4.3 Handstrap ............................................................................................................... 31 4.4 Mushroom Head Handle ......................................................................................... 33 4.5 Shoulder Strap ........................................................................................................
RiTab-10T1 1. Getting Started 1.1 Safety Precautions Warning! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis. Caution! Always ground yourself to remove any static charge before touching the CPU card. Modern electronic devices are very sensitive to static electric charges.
Quick Reference Guide 1.3 System Specifications System Processor Intel® ATOM™ Z3735F 1.33GHz Processor System Memory Onboard 2GB DDR3L Storage Onboard 32GB eMMC, Optional 64GB Operation System Win 10 / Android 4.4 Display & Touchscreen LCD Size 10.1" Display Type WXGA Resolution 1280x800 Luminance 350 cd/m² Touch Type 10 Points Projective Capacitive Wireless Communication WLAN 802.11 b/g/n Bluetooth Bluetooth 4.
RiTab-10T1 Power Requirement Power Connector DC Jack Power Requirement +19V Battery Hot-Swappable 27.75W Li-Polymer Battery (3S1P) Internal 3.7W Li-Polymer Battery (2S1P) Battery Operating Time 8 Hours Adaptor Input: 100~240Vac/50~60 Hz Output: 40W Adaptor (19VDC@2.1A) 65W Adaptor (19VDC@3.42A) Mechanical & Environmental Construction Rubber + Plastic Dimension 281.9mm x 201mm x 20.
Quick Reference Guide 1.4 System Overview 1.4.1 Front View NFC Reader Power Button LED Indicator SCR MSR 1.4.
RiTab-10T1 1.4.3 Right Side SCR MSR 1.4.4 Left Side Power Button G Sensor Lock Power Button Control Mode 12 Time Function 1 Sec. Power On 4 Sec. ForcedPower Off 1 Sec. Suspend 1 Sec. Resume 7 Sec.
Quick Reference Guide 1.4.5 Top View Barcode Scanner 1.4.6 1.4.7 Bottom I/O I/O (See 1.4.7) (See 1.4.7) I/O Interface Connectors Label Function Micro HDMI Micro HDMI Connector Micro SD Micro SD Card Slot USB 1 x USB 2.
RiTab-10T1 1.4.8 LED Indicator LED Indicator Status Power Off Sleep Mode Power On (Main Battery Capacity) 21% ~ 100% LED Off 11% ~ 20% Red, Blinking: ON 0.5sec., OFF 2 sec. LED Off LED Off Charging Amber Amber Amber Charging Finished w A/C Green Green Green Not Charging 14 RiTab-10T1 Quick Reference Guide 4% ~ 10% Red, Blinking: ON 0.5 sec., OFF 1 sec.
Quick Reference Guide 1.5 System Dimensions 1.5.
RiTab-10T1 2. Hardware Configuration Note: If you need more information, please visit our website: http://www.avalue.com.
Quick Reference Guide 2.1 Battery Removal/Change Rotate the battery lock to remove/change the battery. 2.2 Inserting SIM Card SIM card slot is located inside the battery bay. Remove the battery before inserting the SIM card in the direction shown as below. NOTE: Cellular function is only available when 3G module is installed.
RiTab-10T1 2.3 Inserting Micro SD Card Push the Micro SD card into the slot. To remove the Micro SD card, simply push the card again and it will pop out automatically.. 2.4 MSR (Optionsl) The Magnetic Strip Reader is located at the right side of RiTab-10T1 and is used in the direction shown as below.
Quick Reference Guide 2.5 SCR (Optional) The Smart Card Reader is located at the right side of RiTab-10T1 and is used in the direction shown as below. 2.6 Barcode Scanner (Optional) 2.6.1 Barcode Scanner Specifications Performance Sensor CMOS sensor with rolling shutter and 640*480pixel resolution.
RiTab-10T1 Expanded , RSS Limited , RSS-14 , Chinese Sensible(Han Xin) code , Codablock A , UPC-A/EAN-13 with Extended coupon Code , Coupon GS1 , GS1codebar Mechanical/Electrical Dimensions Typical: 21.17mm(W) x 14.6mm(D) x 11.52mm(H) Maximum: 21.57mm(W) x 14.95mm(D) x 11.73mm(H) Interface 12 pin non-zif connector Input Voltage 232: 3.3VDC ± 5%, USB: 5.0VDC ± 5%, Typical Current Draw 232: 3.3V input--Scan 310mA RMS, Idle 65mA RMS, Standby 3.
Quick Reference Guide 2.7 NFC NFC is located at the top right of RiTab-10T1, indicated as below.
RiTab-10T1 3. Software Note: If you need more information, please visit our website: http://www.avalue.com.
Quick Reference Guide The software settings decribed below is under condition that the user is using a Windows 10 platform. 3.1 Adjusting LCD Brightness The Brightness Control is accessed by swiping the tablet screen from the far right to the left. You will then have access to Action Center then choose . Tap on the icon to switch among 25%, 50%, 75% and 100%.
RiTab-10T1 If you need to further adjust the display setting, tap on the Settings. 24 RiTab-10T1 Quick Reference Guide .
Quick Reference Guide 3.2 Adjusting Speaker Volume Speak volume adjustment can be accessed from the Desktop. Click on the icon and you can adjust the volume by dragging the volume bar.
RiTab-10T1 3.3 Battery Overview The Battery Overview can be accessed by pressing All settings -> System.
Quick Reference Guide 3.4 WiFi Wifi connection can be turned on at Action Center.
RiTab-10T1 3.5 Bluetooth Bluetooth function can be turned on at Action Center.
Quick Reference Guide 4. Accessories Note: If you need more information, please visit our website: http://www.avalue.com.
RiTab-10T1 4.1 Desktop Cradle Place RiTab-10T1 on the desktop cradle in the direction shown as below. 1xDC-in 2xUSB2.0 2xUSB2.
Quick Reference Guide 4.2 4-Bay Battery Charging Station While charging the batteries on the charging station, place the batteries shown as below. NOTE: The adaptor for charging station is the same for RiTab-10T1 4.3 Handstrap There are two ways of having the handstrap installed according to user’s using habit shown as below.
RiTab-10T1 To install, insert the handstrap into the hole at the back of the tablet and turn the handstrap clockwise to lock the handstrap. To remove the handtrap, turn the handstrp counter-clockwise into horizontal, then press the button on the handstrap and remove.
Quick Reference Guide 4.4 Mushroom Head Handle To install the handle, insert it into the hole at the back of RiTab-10T1 and turn the handle clockwise to lock it. To remove, turn the handle counter-clockwise, press the button then remove from the tablet.
RiTab-10T1 4.