Certification Exhibit FCC ID: R4N-AW5802MR IC: 5303A-AW5802MR FCC Rule Part: 15.247 IC Radio Standards Specification: RSS-210 ACS Project: 12-2135 Manufacturer: AvaLAN Wireless Systems Inc Model: AW5802MR User Manual 3998 FAU Blvd.
AW5802mTR-EVAL User’s Manual 5.
AW5802mTR User’s Manual Thank you for your purchase of the AW5802mTR-EVAL Wireless Ethernet Module Evaluation Kit. The AW5802mTR Module consists of the AW5802MR Radio Module soldered to a second PC board that provides power and an Ethernet data interface. This Evaluation Kit provides a pair of these Ethernet-interfaced modules along with the necessary accessories to allow your testing and determination of the suitability of these modules for inclusion in your own systems.
User’s Manual AW5802mTR Operational summary The AW5802mTR Radio Module allows the user to create a long-range, wireless Ethernet network with up to 16 subscriber units per access point. Configuring a wireless link with the AW5802mTR requires the establishment of six elements: • Each radio must know whether it is to be an access point (AP) or subscriber unit (SU). • Each radio must have an IP address that is unique among all others on the same network.
AW5802mTR User’s Manual Evaluation Kit Contents The AW5802mTR-EVAL 5.8 GHz Wireless Ethernet Module Evaluation Kit contains two each of the following items: • • • • • AW5802mTR Wireless Ethernet Modules AW5-5800 Omnidirectional Antennas AW-P8 Antenna to Radio Connectors AW-POE Power Over Ethernet Injectors AW-12VPS 12 Volt Power Supplies Additional quantities of any of these components may be purchased from AvaLAN Wireless or our distributors.
User’s Manual AW5802mTR Physical Dimensions Power: 5-48 VDC Ethernet: 10/100T Power: 9-48 VDC Mounting Holes 23 mm 66 mm 70 mm Antenna: Reverse polarity SMA Mounting Holes 5.8 GHz Channels Channel 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Center Frequency Auto Mode 5728.125 MHz 5730.173 MHz 5732.221 MHz 5734.269 MHz 5736.317 MHz 5738.365 MHz 5740.413 MHz 5742.461 MHz 5744.509 MHz 5746.557 MHz 5748.605 MHz 5750.653 MHz 5752.701 MHz 5754.749 MHz 5756.
AW5802mTR User’s Manual Browser Interface Configuration 1. Digital configuration is done by means of the AW5802mTR’s built in browser interface. It should be powered on and connected at least temporarily to a network containing a computer that can run a conventional web browser. 2. Download the AvaLAN IP Discovery Utility from our website and extract ipfinder.exe from the zip archive, placing it on your desktop or in a convenient folder. http://www.avalanwireless.com/ipfinder/ipfinder.
User’s Manual AW5802mTR 5. Make note of the chosen IP address and password, then click “Go to Device Web Page.” This will cause your default web browser to launch with the device IP address in the browser address bar. Or you may launch the browser on your own and enter the web page address manually: http://[the IP address you just set]. 6. The browser page that loads first shows the current device information and QoS statistics and provides a login at the upper right.
AW5802mTR User’s Manual Despite the warning, you will need to click the “Advanced Admin” button in order to set the device type, ID and encryption key. You should then see a page similar to this: 8. On the Advanced Admin page, set the parameters as follows: • Choose Device Type: Access Point or Subscriber Unit. • For Subscriber Units, assign unique ID numbers in numeric order from 1 to 63. • For an Access Point, enter the number of Subscriber Units that will be communicating with it.
User’s Manual AW5802mTR LED and Switch Behavior Reset Switch: Press momentarily for soft reset of processor. Hold for 10 seconds to reset module to factory defaults.
AW5802mTR User’s Manual “Easy Key” Configuration In most cases, the browser interface is a better choice for configuring the modules. But they also can be configured as a point-to-point bridge or a point-to-multipoint group using the DIP switches. When this method is used, the module that will operate as the access point provides a unique network ID calculated from its MAC address and a unique random encryption key programmed into it during manufacture.
User’s Manual AW5802mTR To add a new SU to the AP, disconnect the AP from the network and power off. Connect an Ethernet cable between the SU and AP. Power up the SU FIRST and then the AP. The SU will receive the key. Disconnect the Ethernet cable and cycle power on the SU to cause the new keys to take effect. To re-key SUs to a new AP, proceed as in the inital setup, making sure to power up the AP FIRST. Technical specifications Characteristic Specification/Description RF transmission rate 1.
AW5802mTR User’s Manual Agency Certifications Warning: Changes or modifications to this device not expressly approved by AvaLAN Wireless could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
User’s Manual AW5802mTR Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.