Certification Exhibit FCC ID: R4N-AW2400MR IC: 5303A-AW2400MR FCC Rule Part: 15.247 IC Radio Standards Specification: RSS-210 ACS Project Number: 14-0082 Manufacturer: Avalan Wireless Systems Inc. Model: AW2400MR 5015 B.U.
AW2400mR-EVAL USER’S MANUAL 2.
AW2400mTR User’s Manual Thank you for your purchase of the AW2400mR-EVAL Wireless Ethernet Module Evaluation Kit. If you have any questions when configuring your AvaLAN system, the best place to get answers is to visit www.avalanwireless.com. You will also find the latest updates there. If more assistance is needed, send email to support@avalanwireless.com. To speak to a live technician, please call technical support at the number below during normal business hours.
User’s Manual AW2400mTR Operational summary The AW2400mR Radio Module allows the user to create a long-range, wireless Ethernet network with up to 16 subscriber units per access point. The configuration may include any combination of AW2400mR, AW2400xTR, AW2400iTR and AW2400xTP radios. Configuring a wireless link with the AW2400mR requires the establishment of six elements: • Each radio must know whether it is to be an access point (AP) or subscriber unit (SU).
AW2400mTR User’s Manual Evaluation Kit Contents The AW2400mR-EVAL 2.4 GHz Wireless Ethernet Module Evaluation Kit contains two each of the following items: • • • • • AW2400mR Wireless Ethernet Modules AW2-2400 Omnidirectional Antennas AW-P8 Antenna to Radio Connectors AW-POE Power Over Ethernet Injectors AW-12VPS 12 Volt Power Supplies Additional quantities of any of these components may be purchased from AvaLAN Wireless or our distributors.
User’s Manual AW2400mTR Physical Dimensions Power: 5-48 VDC Ethernet: 10/100T Power: 9-48 VDC Mounting Holes 23 mm 66 mm 70 mm Antenna: Reverse polarity SMA Mounting Holes 2.4 GHz Channels Channel 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Center Frequency Auto Mode 2.416667 GHz 2.418750 GHz 2.420833 GHz 2.422917 GHz 2.425000 GHz 2.427083 GHz 2.429167 GHz 2.431250 GHz 2.433333 GHz 2.435417 GHz 2.437500 GHz 2.439583 GHz 2.441667 GHz 2.
AW2400mTR User’s Manual Browser Interface Configuration 1. Digital configuration is done by means of the AW2400mR’s built in browser interface. It should be powered on and connected at least temporarily to a network containing a computer that can run a conventional web browser. 2. Download the AvaLAN IP Discovery Utility from our website and extract ipfinder.exe from the zip archive, placing it on your desktop or in a convenient folder. http://www.avalanwireless.com/ipfinder/ipfinder.
User’s Manual AW2400mTR 5. Make note of the chosen IP address and password, then click “Go to Device Web Page.” This will cause your default web browser to launch with the device IP address in the browser address bar. Or you may launch the browser on your own and enter the web page address manually: http://[the IP address you just set]. 6. The browser page that loads first shows the current device information and QoS statistics and provides a login at the upper right.
AW2400mTR User’s Manual Despite the warning, you will need to click the “Advanced Admin” button in order to set the device type, ID and encryption key. You should then see a page similar to this: 8. On the Advanced Admin page, set the parameters as follows: • Choose Device Type: Access Point or Subscriber Unit. • For Subscriber Units, assign unique ID numbers in numeric order from 1 to 63. • For an Access Point, enter the number of Subscriber Units that will be communicating with it.
User’s Manual AW2400mTR LED and Switch Behavior Reset Switch: Press momentarily for soft reset of processor. Hold for 10 seconds to reset module to factory defaults.
AW2400mTR User’s Manual “Easy Key” Configuration In most cases, the browser interface is a better choice for configuring the modules. But they also can be configured as a point-to-point bridge or a point-to-multipoint group using the DIP switches. When this method is used, the module that will operate as the access point provides a unique network ID calculated from its MAC address and a unique random encryption key programmed into it during manufacture.
User’s Manual AW2400mTR To add a new SU to the AP, disconnect the AP from the network and power off. Connect an Ethernet cable between the SU and AP. Power up the SU FIRST and then the AP. The SU will receive the key. Disconnect the Ethernet cable and cycle power on the SU to cause the new keys to take effect. To re-key SUs to a new AP, proceed as in the inital setup, making sure to power up the AP FIRST. Technical specifications Characteristic Specification/Description RF transmission rate 1.
AW2400mTR User’s Manual FCC Certification The AW2400mR OEM RF Module complies with Part 15 of the FCC rules and regulations. Compliance with labeling requirements, FCC notices and antenna regulations is required. Labeling Requirements In order to inherit AvaLAN’s FCC Certification, compliance requires the following be stated on the device and within its operation manual: FCC ID: R4N-AW2400MR This device complies with Part 15 of the FCC Rules.
User’s Manual AW2400mTR IC (Industry Canada) Certification Labeling requirements for Industry Canada are similar to those of the FCC. A clearly visible label on the outside of the final product enclosure must display the following text: Contains Model AW2400MR Radio, IC: 5303A-AW2400MR Integrator is responsible for its product to comply with IC ICES-003 & FCC Part 15, Sub. B - Unintentional Radiators. ICES-003 is the same as FCC Part 15 Sub.
