CENOTE USER MANUAL
READ THIS MANUAL BEFORE USING THE PRODUCT. FAILURE TO FOLLOW INSTRUCTIONS AND SAFETY PRECAUTIONS IN THIS MANUAL CAN RESULT IN SERIOUS INJURY OR DEATH. FOR EASY FUTURE REFERENCE, DOWNLOAD AND SAVE THIS USER MANUAL AND WARRANTY POLICY. DOWNLOAD THIS MANUAL AT: www.auxo-official.
What’s in the Box Carb Cap x 1 Cenote Base x 1 Glass Mouthpiece* x 1 Silicone Rod Seal x 2 Ceramic Nail x 5 Tweezer x 1 Loading Tool x 1 User Manual x1 Glass Nozzle x 1 x5 Type-C to Type-C Charging Cable x 1 20W Charging Adapter x 1 *Each glass piece is hand blown and may vary slightly in shape and size.
QUICK START 1. It is recommended to fully charge the device before first use. the heating rod. p 2. Twist and lift the glass mouthpiece from the Cenote base to expose 3. Place ceramic nail into the center of the heating rod. To ensure contact with the heat sensor, press nail firmly to the bottom. 4. Remove the glass nozzle from the mouthpiece and fill water from the pipe. Avoid filling water while the mouthpiece is still attached to the base Fill the mouthpiece with water from the pipe Water line 5.
Turning On/Off the Device button for 3 seconds. Cenote will make a short vibration ● To turn on/off the device, long press the and illuminate in red and yellow to indicate command success. ● If no activity is detected for 10 minutes or longer, Cenote will turn off automatically. button will blink in red 8 ● If the battery temperature is over 149±34°F(65±1°C), the light on the times and the device will implement overheat protection and suspend usage temporarily.
Session Extension All settings are eligible for a 20s session extension; double press the enjoyment when: button for an additional 20s of ● The current session reaches the 20s countdown, or ● The session ends and goes into cool down. Repeat action to extend again.
LED Indications Lighting Indications Preheating Standby Bluetooth Cool down (Deck light) (Base light) (Connected) Steady red, gradual dim out x2 x4 x6 x8 Short circuit protection Nail error Low battery Overheat protection In-Session Lighting Effect Options Controlled via the AUXO Connect app.
Charging & Battery Level ● Due to safety concerns, Cenote is not operable while charging. ● To charge the device, connect one end of the charging cable to the device and the other to the charging adapter. Cenote also supports wireless charging; any Qi-certified wireless chargers are compatible. ● Charging via the AUXO 20W power adapter takes approx. 1.5 hours for a full charge. Every full charge generates approx. 12 sessions usage (calculation based on 100s sessions).
AUXO Connect App AUXO Connect Pairing 1. Turn on Bluetooth on your phone and place the device near your phone. 2. When the device is found, select accordingly. The LED light will blink in blue when paired successfully. 3. If the connection is unsuccessful, restart the app and try connecting again. If you're having trouble pairing Cenote with your phone, ensure the following: 1. 2. 3. 4. Your AUXO Connect app is up to date. Your device is turned on (restart if necessary).
Control Panel Heat Setting (Left to right) Row 1 - heat setting, temperature adjustment, session duration, lighting effect. Row 2 – Session extension, lighting effect extension. Scroll the setting bar to select your preferred option between settings 1-3 or Pro Mode. Temperature Adjustment Only available to Pro Mode. For settings 1-3, the setting’s temperature will be displayed. Session Duration Only available to Pro Mode, between 20s and 90s.
Device Setting Unit of Temperature Select your preferred temperature scale, Fahrenheit(°F) or Celsius (°C). Light Brightness Dim out or maximize the brightness of the lighting effect for sessions. Light During Charging Dim out or maximize the brightness of the lighting effect during charging. Lighting Effects Add up to 8 lighting effects to your selection. New lighting effects will be available upon notification. Vibration Intensity Adjust the vibration intensity to your preference, low or high.
Cleaning & Maintenance Cleaning is highly recommended after each use. Ceramic Nail: 1. Twist and lift mouthpiece to expose the chamber. Let the heating rod and ceramic nail cool down to room temperature. Don’t handle if hot. 2. Dip cotton swab in 90% isopropyl alcohol and clean nail thoroughly. Tip: The recommended usage for each ceramic nail is 70-150 sessions. Please replace the nail according to its condition. Mouthpiece: 1. Carefully remove the glass mouthpiece from Cenote base before cleaning.
Warning: Isopropyl alcohol is highly flammable. Let the attachments dry completely before heating. Choking Hazard – Dissembled mouthpiece contains small parts. Keep away from children and pets. Storage ● Do not expose the device to direct sunlight, dust, moisture or mechanical shock. ● Do not place heavy loads on the device or drop it, the device may no longer work properly if such occurs.
Safety ● Do not attempt to disassemble or repair the device as damage or personal injury may occur. ● Keep body parts, clothing, etc. away from the heat source to prevent scalding or damage to personal property. ● To prevent scalding, do not touch the heating rod or ceramic nail before it’s completely cooled down. ● Refrain from using other power adapters not provided with the device when charging Cenote. ● Keep hands dry when touching the charging device to prevent electric shock.
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver.
Warranty Limited Warranty Coverage AUXO provides a limited warranty on authentic products purchased from the AUXO official website and authorized offline stores against defects in material and/or workmanship under normal use. In order to keep this limited warranty in effect, the product must have been handled and used as prescribed in the instructions accompanying this warranty. AUXO warrants only to the original purchaser of the product and the limited warranty is nontransferable.
4. Damage(s) caused by operating the device or charging adapter outside the permitted or intended use as prescribed in the user manual. 5. Damage(s) of the heating rod due to tampering, counterfeit or by filling the ceramic nail with unrecognized or unintended materials. 6. Damage(s) caused by modifications to alter functionality or capability. 7. Cosmetic damage occurring through wear and tear, including but not limited to scratches, dents and broken plastic on ports. 8.
Return & Refund Policy Please carefully research the product you are interested in before purchasing. Refunds are only available for new and unused devices purchased on www.auxo-official.com and must be returned to AUXO within fourteen (14) days of receipt. If the tamper-proof seal is broken, a refund cannot be honored.
WARRANTY CARD Product: Serial Number: Date of Purchase: (Based on the date from purchase receipt) Date(YYYY/MM/DD): Store Information: Store Name: Phone: Store Address: City: Country: ZIP Code:
Customer Information: Name: Phone # or email: Address: City: Country: ZIP Code: AUXO reserves the right of final decision in all warranty cases. AUXO may interpret and revise the content of this warranty card. Please present your warranty card together with your proof of purchase in order to obtain your warranty service. For more information please visit www.auxo-official.com or email us via support@auxo-official.
Not for sale to minors. AUXO vaporizers are only intended for use with products made from federally legal hemp as defined in relevant provisions of the 2018 Farm Bill and codified at 7 U.S.C. § 1639o(1) and 21 U.S.C. § 802(16)(B)(i) and are not intended for use with any illegal controlled substance. Visit us at www.AUXO-OFFICIAL.
© AUXO All rights reserved. Subject to alteration.