Installation Instructions

Version 1.02  28 May, 2020  AuVerte AG  Rothusmatt 14, CH-6300 Zug, Switzerland  www.AuVerte.com

FS10x PIR Motion Sensor

Benefits

 Motion sensing as part of room occupancy detection solution

 Wireless communication to room automation equipment

 Simple to use – simple to maintain

 True IPv6 IoT connectivity to all devices

 Low cost

 Ten-year warranty

 Powered by CR2477 lithium coin cell battery lasting 5 years

 Designed for end-of-life product recoverability

Models

 Motion sensor

 Motion sensor with temperature and humidity sensor

 Black and white housing colors

The FS10x PIR (passive infrared) motion sensor from AuVerte is part of a modern room automation solution and is

a key element to determine the occupancy status of an enclosed space. Tracking the passive heat given off by

building occupants and using encrypted wireless communication provides for a high degree of data privacy. Battery

powered and utilizing wireless RF communication, this sensor is simple to install and to maintain.

In a large or complex room layout, multiple FS10x motion sensors can be linked together. All FS10x motion sensors

store 90 minutes of motion history for advanced data analytics and auto-configuration algorithms.

C5xx Ondur Thermostat

GK101 Optical Door/Window Sensor

GK104 Aux. Temperature/Humidity Sensor

Model：

FS101

PAGE 1
Model：FS101 FS10x PIR Motion Sensor Benefits Models          Motion sensor  Motion sensor with temperature and humidity sensor  Black and white housing colors Motion sensing as part of room occupancy detection solution Wireless communication to room automation equipment Simple to use – simple to maintain True IPv6 IoT connectivity to all devices Low cost Ten-year warranty Powered by CR2477 lithium coin cell battery lasting 5 years Designed for end-of-life product recoverability The FS10x PI
PAGE 2
FS10x PIR Motion Sensor Cut Sheet Specifications Device Sensors Power Motion Sensor PIR (Passive Infrared) Motion Sampling Latching and sampled once per 1000 milli seconds CR2477 3V/1000mAh coin-cell (not included) Approved battery vendors: • • • Panasonic Mitsubishi Murata Low-battery sensor Measures and reports battery voltage to support applications that signal lowbattery conditions.
PAGE 3
FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.