User's Manual

ManualsBrandsAutostart ManualsElectronicsR/C TRANSCEIVER - TX

Table Of Contents

AUTOMATIC TRANSMISSION MULTI-CHANNEL

TWO-WAY LCD REMOTE STARTER

SYSTEM

AS-2510 TW

User Guide

Transmitter Part Number and Module Serial

Number .......................................................2

Introduction.................................................2

What is “eSH” Technology?........................2

Basic Remote Operation ............................2

LCD Remote Functions ..............................3

Basic Vehicle Operation .............................3

Alarm Clock ................................................4

Time Adjust Mode.......................................4

Countdown Timer .......................................4

Parking Countdown ....................................4

Melody Selection ........................................4

Vibration Mode............................................4

Power Saving Mode ...................................4

Remote Control Finder ...............................4

LCD Remote Operation ..............................4

Basic Vehicle Operations.......................5

Transmitter Mode Selection...................5

Alarm and Countdown Adjustments ......5

Cold Weather Mode...............................5

Home Valet

.........................................6

LCD Transmitter Operation and

Confirmations..............................................7

Timing and Alarm Adjustment................8

Transmitter Finder .................................8

Remote-starting Your Vehicle.....................8

Vehicle Presets......................................8

Driving Off..............................................8

Using the AS-2510 TW: Advanced Features9

Idle Mode...............................................9

Turbo Mode ...........................................9

“Home Valet” ™ Mode...........................9

Remote Valet Mode...............................9

Valet Mode ..........................................10

Panic Mode (this option must be

programmed) .......................................10

Quick Lockout

..................................10

Remote Door Locks Option .................10

Cold Weather Mode.............................11

Priority Door Access............................11

The user-selectable options are as

follows:.................................................11

Remote Door Locks Option .................11

Safe Start.............................................11

Starter Kill Option ................................11

Passive or Active Arming ....................11

Ignition-controlled Door Locks Option .12

Ignition Relock .....................................12

Secure Lock Option.............................12

Remote Trunk Release Option............12

Engine Run Time.................................12

Multi-car Operation ..............................12

Diagnostics – Parking Lights Flash Rate

(Normal Operation)...................................12

H.1.50.S.2.00 Rev: 1.05 October 16, 2003 – Fb CA Manufactured in Canada by Autostart

Summary of content (13 pages)

PAGE 1
A U T O M A T I C T R A N S M I S S I O N M U L T I - C H A N N E L T W O - W A Y L C D R E M O T E S T A R T E R S Y S T E M AS-2510 TW User Guide Transmitter Part Number and Module Serial Number .......................................................2 Introduction .................................................2 What is “eSH” Technology?........................2 Basic Remote Operation ............................2 LCD Remote Functions ..............................3 Basic Vehicle Operation ............
PAGE 2
FCC USER NOTICE (U.S.A.): This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.
PAGE 3
The functions of the transmitter are as follows: Note: Pressing the LOCK and UNLOCK buttons simultaneously will activate the AUX 2 output. LCD Remote Functions The Transmitter offers several command-confirmation and timer features. This section explains some of the key functions available on the Remote Control. Next section gives a summary of the button combinations used to access the functions (see LCD Remote Operation Tables).
PAGE 4
( ) button is used to access all advanced functions of the Remote Control. (Refer to the LCD Operation and Confirmations tables.) Alarm Clock The LCD Remote Control has a built-in Alarm Clock which can be set up using the button. Use the on and off (refer to the tables). and buttons to switch the Alarm Clock Time Adjust Mode Use Time Adjust Mode to set the current time on your Remote Control using the button (refer to the tables).
PAGE 5
Basic Vehicle Operations FUNCTION BUTTON PRESSED ICON BUZZER INSTRUCTIONS /DESCRIPTION LOCK AND ARM THE STARTER KILL UNLOCK AND DISARM THE STARTER KILL LOCK 1 Beep UNLOCK 2 Beep TRUNK OR AUX 3 1 Beep TRUNK OUTPUT MELODY START THE ENGINE MELODY STOP THE ENGINE START * (See Runtime Options below) + STOP None Light ON ON for 10 seconds Press once Transmitter Mode Selection FUNCTION BUTTON PRESSED POWER-SAVING MODE +( + ICON BUZZER MELODY ) INSTRUCTIONS /DESCRIPTION Press UNLOCK
PAGE 6
TO ENTER COLD WEATHER MODE BEEP TO EXIT COLD WEATHER MODE TO ENTER COLD WEATHER MODE IN SAFE START MODE TO EXIT COLD WEATHER MODE IN SAFE START MODE Home ValetTM FUNCTION None X2 None X2 BY PRESSING ICON None Press and hold seconds. Press and hold Press twice within 3 seconds. Press and hold for 1 sec-BEEPthen press and hold for 3sec. None Press twice within 3 seconds. Press and hold for 1 sec-BEEPthen press and hold for 3sec.
PAGE 7
Timing Countdown Adjustment (see “ON PRESS NUMBER” 8 of Alarm and Countdown Adjustment) FUNCTION BY PRESSING ICON MELODY 1st time MELODY 2nd time FOR PARKING COUNT DOWN PRESS AND HOLD BUZZER MELODY 3rd time MELODY 4th time THEN PRESS MELODY 5th time MELODY 6th time MELODY 7th time INSTRUCTIONS / DESCRIPTION 10 MIN PARKING COUNT DOWN MODE 20 MIN PARKING COUNT DOWN MODE 30 MIN PARKING COUNT DOWN MODE 60 MIN PARKING COUNT DOWN MODE 90 MIN PARKING COUNT DOWN MODE 120 MIN PARKING COUNT DOWN M
PAGE 8
Start/Stop While in Safe Start Mode FUNCTION BUTTON PRESS ICON BUZZER DESCRIPTION Press START ON SAFE START MODE STOP ON SAFE START MODE X2 + + MELODY + None simultaneously twice + within 3 seconds. Press for 1 sec- a BEEP will be heard- then press 1sec and a melody will be heard again. MELODY Timing and Alarm Adjustment To apply changes to the hours, minutes melody, etc. you must press and hold the Function button for three (3) seconds after which the hour position will start to flash.
PAGE 9
Using the AS-2510 TW: Advanced Features Idle Mode This feature allows you to remove the ignition key from the ignition switch and leave the vehicle running for its pre-programmed run time while you are away from your vehicle, or until it is shut down. (To set the run time see Engine Run Time) To enable the Idle Mode: 1. Press and hold the LOCK, UNLOCK or START/STOP button on your remote transmitter while the engine is running. • Pressing LOCK or UNLOCK will unlock the doors.
PAGE 10
With the Remote Valet activated, the remote starter function will be disabled. Valet Mode The system can be placed in Valet Mode to disable the remote starting capabilities. If the vehicle needs to be serviced, or if you park it indoors, the Valet Mode will prevent the engine from being accidentally started by remote control. To put the system i n t o Valet Mode: 1. Turn the ignition key to the IGNITION ON (RUN) position. 2. Within 3 sec. press and hold the valet button for approx. 1 sec. The L.E.D.
PAGE 11
Cold Weather Mode When the Cold Weather Mode is active, the engine starts every 2 hours and runs for 4 minutes (or for 9 or 20 minutes with Diesel engines); this routine will go for a period of 24 hours. To activate Cold weather Mode: Press and hold start/stop button for three seconds. The parking lights will flash 3 times. There will be one (1) beep as a confirmation and the icon will be displayed.
PAGE 12
• To arm the Starter Kill option in Active or Passive Mode, press and hold the LOCK button on the transmitter. The parking lights will flash once. (If Remote Door Locks were installed, this will also lock the doors). In Passive Mode, the system will automatically arm 1 or 3 minutes after the engine has been turned off. Important note: When the system re-arms automatically, you can disarm the system again by pressing the UNLOCK button. Ignition-controlled Door Locks Option This is an added security feature.
PAGE 13
2 3 4 5 6 8 10 1 – pause – 2– pause – 2 1 – pause – 2 2 – pause – 3 2 – pause – 1 ON solid ON 2 sec. ON 3 sec. ON 4 sec. ON 25 sec. Irregular • • • • • • • • • • • Remote start attempt cancelled by remote. Run Time cancelled. Doors unlocked, Starter Kill disarmed. Exit Remote Valet Entering Cold Weather Mode. Entering Remote Valet. +12 V where detected on the brake line and cranking was cancelled. Entering Tach-learning Mode New Transmitter learnt. Tach learnt.