AUTOSLIDE PTY LTD 3/413, VICTORIA STREET, WETHERILL PARK 2174 NSW AUSTRALIA Specification for Lithium-ion Battery AUTOSLIDE AUTOSWING BATTERY MODEL : AWS-BATTERY Part Number : DY-6S1P18650-2103C COPYRIGHT OF AUTOSLIDE PTY LTD 7TH JUNE 2022 1
1、 Range of application This specification applies to the battery production using Li-ion Pack. Declaration: This product conforms the requirement of RoHS. 2、 Battery model 2.1 Battery model:NiCoMn 2.2 Cell type and specification: 18650(3.6V/3200mAh, cell resistance≤30±mΩ AC 1kHz) 3、 Battery pack basic function Item Performance Remark 3.2Ah -charge : 0.5C (1.55A), 25.2V, 0.02C(0.62A) up to current @ RT - release charge: 0.2C (20A),15V end voltage @ RT 3.1Ah -charge: 0.5C (1.55A), 25.2V, 0.02C(0.
4、Test condition 4.1、 Environmental condition:Unless otherwise specified,all test of this specification should be performed under standard atmospheric condition: Temperature:15℃~35℃;Relative humidity:45%~75%;Atmosphere pressure:86kPa~106kPa 4.2、Measure instrument and equipment requirement Accuracy of measuring voltage instrument should not be less than level 0.5,resistance should be no less than 10KΩ/V. ⚫ Accuracy of measuring current instrument should not be less than level 0.5.
5、 Function and test method Item Test method Standard charge CC/CV mode, in the condition that environment temperature is(23±5)℃,charging source keep constant current charge with 0.2C current until battery voltage reach25.2V,then turn to constant voltage charge method until charge current is less than 0.02C(0.062A). Capacity After standard charge,Shelve battery at indoor temperature for 1h, in the condition that environment temperature is (23±5)℃, constant current discharge with 0.
6、 Battery package diagram 6.1 Battery pack picture 7、 Transport 50%~60% Capacity, Battery should prevent vibration、impact、extrusion or exposed to the sun and rain, apply to cars, trains, ships, aircraft and other ordinary vehicles transportation. 8、Storage The battery should be stored at the clean, dry and ventilative indoor with a ambient temperature for - 10 ℃ ~ 35 ℃,Relative humidity:45%~75%,should avoid contact with corrosive substances,keep away from fire and heat source.
Battery can avoid danger with protection agency and protection circuit inside. Inappropriate dismantling will damage the protection function, and cause the battery heating, smoking, deformation or burn Do not let the electrodes of the battery connected by metal, don't let the battery and metal stored or moved together . If the battery is short circuit, there will be a large current and it will damage the battery, cause battery heating, smoking, deformation or burn.
FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.