User's Manual

Rated voltage 3VDC (2x lithium coin batteries in parallel)
Rated current Average 13uA
IP protection class IP30
Product Maximum frequency 16MHz
RF transmitter specifications
RF Frequency 433.92MHz
Type of modulation ASK/OOK
Type of encoding Pulse width modulation
Transmission bit rate 830 bit/sec
Transmission protocol Keeloq
Length of transmitted packet 66 bits
Period of re-transmission when activated Not re-transmitted untill released
Transmitting power <10dBm (nom 7dBm)
USER’S MANUAL
WIRELESS TOUCH BUTTON SWITCH
AUTOSLIDE.COM
Safety Instruction
Product Overview
Features
Channel Selection
How to connect to Autoslide Controller
Technical Specifications
Thank you for purchasing Autoslide Wireless Push Button. Please
refer to the following operation sheet before usage.
• Wireless touch button, no wiring required.
• Entire activation area, soft touch to activate the door.
• 2.4G wireless communication technology, stable frequency.
• Transmitter uses Low power transmission technology. It has long-range and
low power consumption.
• Easy to connect with Autoslide operator.
• LED light indicates the switch is active.
Touch range area
Indicator Light
Or use double side
self-adhesive tape.
Learner button
1. Press the learn button on the
Autoslide Controller.
2. Press the touch button, when the
indicator light flashes red, the
switch is connected.
The touch button now is connected to the controller and ready to activate the door.
Autoslide Wireless Touch Button
has two-channel selections, Master
or Slave.
The onboard switch selects the
preferred channel.
Autoslide Controller
!
Wall mount options
1. Undo the screww at the
bottom of the switch.
2. Use 2 wall screws to fix
the switch to the wall.
Option 1 Option 2