AutoRight 12 Volt, 6 Inch Cordless Orbital Buffer/Polisher ® WARNING: To reduce the risk of injury, user must read and understand the instruction manual before prior to operation of this 6 inch orbital cordless buffer/polisher. For Customer Service in Canada or US contact: 763-780-5115 or 1-800-264-5442 8:00 am to 5:00 pm CST.
Important Safeguards Medidas preventivas importantes General Safety Rules Work Area Personal Safety Tool Use and Care Service Environmentally Safe Disposal of Your Batteries 3 3 3 3 4 4 Battery Safety Rules 4 Batteries and Battery Charger Charging the Battery 5 5 Specifications of the AC/DC Charger Adapter 5 Specifications Kit Contents Parts Listing for the 6 inch Orbital Polisher/Buffer Operating Instructions Applications Operation Warnings/Instructions Battery Installation Polishing Clean Up Car
Important Safeguards GENERAL SAFETY RULES READ AND UNDERSTAND BEFORE USING !WARNING! Read and understand the user manual instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. WORK AREA 1. Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. 2. Do not use power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust.
Important Safeguards SERVICE 1. Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel may result in a risk of injury. 2. Accessories must be rated for at least the speed recommended on the tool warning label. Wheels and other accessories running over rated speed can fly apart and cause injury. Important!: Do not operate the polisher until you have inspected each part. If any part is missing or damaged, do not use it.
Important Safeguards BATTERIES AND BATTERY CHARGER • Unplug your battery charger when you are not charging your batteries. • If your battery pack is hot, let it cool before recharging. • Do not charge batteries in direct sunlight. • Keep your battery charger clean, do not allow materials in the cavity of the charger, and while UNPLUGGED wipe out the cavity with a dry cloth, never use water or solvents.
SPECIFICATIONS SPECIFICATIONS Orbital Diameter Rated Voltage DC Speed Without Load Rated Current Battery (Part Number C817544) Battery Type 6” 12V 3300 rpm 5 Amps 12V Nickel Cadmium (Ni CAD) Rechargable 5 to 7 hours 120V AC 60Hz Charging Time Charger Input Current NOTE: Please contact AutoRight’s customer service department at 763-780-5115 or 1-800-264-5442. 8:00 am to 5:00 pm CST with questions. PARTS LIST 1. Interface Pad 2. Motor Switch 3. 12V Battery 4. Battery Pack Charging Stand 5.
OPERATING INSTRUCTIONS OPERATION WARNINGS/INSTRUCTIONS There must be a bonnet on the polishing pad before using the polisher. Do not press down on the polisher, the machine’s actions, light pressure does the best job. Do not make adjustments to the polisher while it is in operation. When the polisher is not in use for a short duration, rest the polisher in an upright position. • The most common error is applying too much wax. B efore you begin, make sure the work surface is clean and dry.
OPERATING INSTRUCTIONS Battery Pack Installation 1. Insert the BATTERY PACK into the polisher. Align the polarity rib on the BATTERY PACK with the polarity slot in the polisher handle and slide the pack into the polisher. Make sure the latches on the BATTERY PACK have snapped into place. 2. Check the BATTERY PACK alignment by lightly pulling on the end of battery pack. POLISHING 1. Place proper pad according to Figure 1. 2.
TROUBLESHOOTING Battery pack charging stand light does not come on Battery pack is dead. Replace it with a new battery. After charging the battery, unplug the charger from the power source. The pad does not rotate Check if the battery is not charged or the battery pack is worn out. There are times where a battery pack will not accept a full charge: when it is a new battery pack and when the pack has not been used for an extended period of time. These are normal conditions and do not indicate a problem.
Medidas preventivas importantes NORMAS GENERALES DE SEGURIDAD LEA Y COMPRENDA LAS INSTRUCCIONES ANTES DEL USO ¡ADVERTENCIA! Lea y comprenda las instrucciones del manual del usuario. En caso de no seguir todas las instrucciones que se presentan a continuación, se correrá el riesgo descarga eléctrica, incendio y/o lesiones personales graves. ÁREA DE TRABAJO 1. Mantenga su área de trabajo limpia y bien iluminada. Los bancos de trabajo desordenados y las áreas oscuras propician accidentes. 2.
Medidas preventivas importantes SERVICIO TÉCNICO 1. Solamente el personal capacitado en reparaciones podrá hacer el servicio técnico de la herramienta. Cualquier servicio técnico o mantenimiento realizado por personal no capacitado puede generar riesgo de lesión. 2. Los accesorios deben cumplir, como mínimo, con la especificación de velocidad recomendada en la etiqueta de advertencia de la herramienta.
Medidas preventivas importantes BATERÍAS Y CARGADOR DE BATERÍAS • Desenchufe el cargador de batería cuando no lo esté utilizando. • Si la batería tiene una temperatura elevada, deje que se enfríe antes de volver a cargarla. • No exponga las baterías a la luz del sol directa mientras las carga. • Mantenga su cargador de baterías limpio. No permita que se aloje ningún material en la cavidad del cargador. DESENCHÚFELO y limpie la cavidad con un paño seco; nunca use agua ni solventes.
Especificaciones Especificaciones Diámetro de la orbital Tensión nominal Velocidad CC sin carga Corriente nominal Batería (Repuesto Nº C817544) Tipo de batería Tiempo de carga Corriente de entrada del cargador 15 cm (6 in) 12 V 3300 rpm 5 amperes 12 V Níquel-cadmio (Ni CAD) recargable 5 a 7 horas 120 V CA 60 Hz NOTA: Puede comunicarse con el departamento de servicio al cliente de AutoRight al 763-780-5115 o al 1-800-264-5442. 8:00 a. m. a 5:00 p. m. (zona horaria central de EE. UU.
INSTRUCCIONES DE FUNCIONAMIENTO ADVERTENCIAS/INSTRUCCIONES PARA EL FUNCIONAMIENTO Antes de utilizar la pulidora, debe colocar un bonete sobre la almohadilla de pulido. No haga fuerza sobre la pulidora; el propio accionar de la máquina, con una ligera presión, hará un trabajo óptimo. No ajuste la pulidora mientras está en funcionamiento. Si deja de usar la pulidora durante un lapso breve, déjela en posición vertical. • El error más común consiste en aplicar exceso de cera.
INSTRUCCIONES DE FUNCIONAMIENTO Instalación de la batería 1. Inserte la BATERÍA en la pulidora. Alinee la marca acanalada de polaridad de la BATERÍA para que coincida con la ranura de polaridad en la empuñadura de la pulidora; deslice la batería hacia el interior de la pulidora. Verifique que los seguros de la BATERÍA hayan calzado en su lugar. 2. Revise que la BATERÍA haya quedado bien alineada; para ello, tire suavemente del extremo de la batería. PULIDO 1.
WARRANTY Two Year Limited Warranty AutoRight warrants this product for two years following date of purchase against any defects in material or workmanship. Any product believed defective within the warranty period should be returned postage-paid with proof of purchase to AutoRight, 1661 94th Lane N.E., Minneapolis, MN 55449-4324, (763-780-5115), Attention: Service Department. AutoRight will repair or replace defective product at no charge, and return postage-paid to you.
