GPS User Manual
一. Functions and Use help 1. Note: 1. Dear users, before using the equipment, you should combine your mobile phone and the device by send a registration command. Send “ZC device password # receiving alarm information mobile phone number # SIM card number of device”. e.g.: ZC000000#15888185569#0 2. Device displays green on platform means online Device displays Yellow on platform means over speed Device displays grey on platform means offline or non-positioning · ACC Security 1. 2.
1. Mobile phone E-fence Settings: Send: “RCMA1” 2. Mobile phone clear E-fence: Send “DRC” · Over speed Alarm Mobile phone over speed settings: Send “ ODn” (0
二． LED State Red LED（ Power ） Flashing Low power alarm Always light Charging Slow Flashing Charge full, Normal working Dark Low power/Shut 1、Yellow LED（GSM） Slow Flashing(15 sec) GSM initialization Flashing GSM signal regular Always light GSM calling/GPRS start dark GSM no signal 2、Blue LED（GPS） 三.
四. Product Specification 1. 2. 3. Product Dimensions: L: 7cm, W: 4cm, H: 0.6cm Product Weight: 45g Standard Voltage: 9V-36VDC 五. Installation Statement 1. Preparation before installation a. Terminal needs insert a SIM card b. GSM card China Unicom or Mobile optional (GSM worldwide application) 2. Relay Use Method Connect relay yellow cable with device yellow cable. See Picture 2. GPS vehicle positioning terminal warranty card Special statement： ： 1.
FCC Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
