Stewart, User’s Guide, Autonet Document Number 186-1100-001 1. Date Effective: May 21, 2009 Rev: 04 Page 1 of 46 PURPOSE The purpose of this document is to provide specifications for the CarFi User’s guide for the Stewart Autonet branded router. 2. SCOPE This document applies to the fabrication and assembly of the Stewart CarFi User’s guide. 3. RESPONSIBILITIES It is the responsibility of contract manufacturer/packaging supplier to follow this document, or create an approved internal document. 4.
Stewart, User’s Guide, Autonet Document Number 186-1100-001 8. TESTING TBD 9. REVISION SYNOPSIS Name dbl dbl dbl dbl 10. Date Effective: May 21, 2009 Description Initial release Updated content, format, etc. Updated content, format, etc. Updated page 1 and 44 Rev: 04 Page 2 of 46 Revision 01 02 Date May 21, 2009 April 22, 2010 03 December 16, 2010 January 12, 2011 04 Approvals Approval Name CONFIDENTIAL Date Title 186_1100_001_04.
CarFi Users Guide
Introducing the Autonet Mobile CarFi Hotspot Thank you for purchasing Autonet Mobile’s CarFi hotspot, designed specifically for the stringent demands of mobile vehicles. The advantages of Autonet Mobile are reliable seamless internet connections wherever you are and whenever you need them most, in your car.
Table of contents CarFi Overview 1 Quickstart guide 5 Configuring the CarFi 6 Configuring Wireless Settings 7 Configuring Security Settings 10 Disabling Login Screen 11 Changing the password 11 Checking Connection status 12 Troubleshooting guide 13 Service Information 15 Technical Specifications 16 Installation Instructions 18 Care and Maintenance 21 Regulatory Information 22 Safety Information 23 Accepted Use Policy 28 Autonet Software License 32 Limited Warranty 35 Lega
The Autonet Mobile CarFi Hotspot Overview Package Contents: CarFi Unit and docking station User’s guide included in the package Installation kit or installation cable Activation guide Snapshot of features Reliable TRU technology yielding maximum connection uptime Maximum reliability, featuring ruggedized device designed specifically for automotive applications Docking station for vehicle-vehicle mobility (must purchase additional dock for this application) I/O’s: 2 x USB ports,
About your CarFi 1 1. External cellular antenna-TNC 2. Complete unit with dock 3. Blue indicator LED 4. Pushbutton for undocking CarFi 5.
About your CarFi continued 2 1 3 4 USB 1. Ethernet port 2. (2) USB ports 3. Compact Flash slot 5 4. TNC antenna connector 5. Dock mounting holes (4) 6.
For technical support please call Autonet Mobile customer service center: 1-800-977-2107 Autonet Mobile assumes no responsibility for the configurations, security, or data files on your wireless device resulting from connection to Autonet Mobile’s network. Anti-virus, privacy and security protection is the responsibility of the user. Do not operate CarFi while driving or perform any function that takes your attention away from safely operating your vehicle.
Quickstart Guide Step 1 Turn your car to the Acc position to power up Autonet Mobile’s CarFi. Step 2 Open your wireless network list and connect to “autonet-XXXX”. (The last 4 digits will be the same as your last 4 digits of CarFi serial number). Step 3 Open your web browser. Click on the login button. Step 4 Happy Surfing! (Please note: You must complete an Autonet service agreement in order to activate CarFi. The Autonet service agreement can be found at: https://www.autonetmobile.
Configuring CarFi It is highly recommended to enable “encryption type/key security” and change the default password for CarFi Configuring CarFi’s settings Step 1 Locate CarFi’s ten digit serial number located on the back side of CarFi, or in front of the User’s guide included in the package. (If you have trouble locating the serial number of the CarFi, please call our customer support line at 1-800-977-2107 for assistance) Step 2: Open a web browser and go to: http://www.autonetrouter.
Configuring Wireless Settings Click on “Wireless Settings” The wireless settings default page will look similar to the right Setting ESSID The ESSID is the identifying name of a wireless network - strictly it is the identifying name of a wireless access point. It allows one wireless network to be clearly distinguishable from another. The default ESSID is autonet-xxxx, where xxxx is the last 4 digits of CarFi’s serial number.
Configuring Wireless Settings (continued) Setting the Encryption type/key By default the encryption type and key are not set at the factory. To set the current encryption type (WEP, WPA, WPA2), use the pull down menu to select the encryption type, then enter the encryption key value. Min/Max digits for each encryption type are the following: WEP-Wired Equivalent Privacy. An IEEE standard security protocol for 802.11 networks. This protocol has been superseded by WPA and WPA2. A 10 Hex digit string (i.e.
Configuring Wireless Settings (continued) Channel Direct communication between an 802.11 Radio card and an access point occurs over a common channel frequency. The FCC allows channels 1 through 11 within the U.S. An important concept to note regarding channel assignments is that the channel actually represents the center frequency that the transceiver within the radio and access point uses (e.g., 2.412 GHz for channel 1 and 2.417 GHz for channel 2).
Configuring Wireless Settings (continued) Fragmentation threshold Fragmentation allows the splitting of an IP packet in a burst of smaller fragments transmitted on the medium. In most cases this adds overhead, but in a very noisy environment this reduces the error penalty and allows packets to get through interference bursts. This parameter sets the maximum fragment size. You may also set this to off to disable the mechanism.
Disabling the Login Screen Click on “login control” Normally a device that connects to the Autonet Mobile network must first click through the login screen that comes up on your web browser. However, there are some devices that do not have a web browser (cameras, music players, etc.), so we’ve created a method for disabling the login page for those devices. To bypass the login screen for a device, check the box under “no login required” next to the MAC address of that device.
Changing the Password (continued) Click on the user name “autonet” Enter a new password and click on “Save Changes” If you forget your password, please contact the Autonet Mobile Customer Service Center to have it reset. Checking the connection status of the CarFi Go to the website http://www.autonetrouter.com to see the current connection status of CarFi.
Troubleshooting Guide For a more complete listing of errors/information please visit our website or call our customer support center: 1-800-977-2107 (http://www.autonetmobile.com/) Problem/Error Solution CarFi has no power (The LED indicator is not visible) Please note at CarFi startup the LED will be off for approximately 15 seconds in its sequencing mode (see LED sequencing pg.
Troubleshooting Guide (cont.) Problem/Error Wireless configuration issues (AutonetXXXX does not appear in your wireless networks window) Solution Disable and then re-enable your wireless interface. Refresh your available wireless networks window. Disconnect CarFi from your wireless network and reconnect. Consult the configuration instructions provided by your Wi-Fi device manufacturer.
Service Information Turn off your vehicle ignition; disconnect CarFi or any other Autonet Mobile accessories and, if necessary, refer the issue to qualified service personnel or call Autonet Customer Service Center if: The main unit, docking station, power cable/connection or connector to your CarFi is damaged. Liquid has spilled or objects have fallen into your CarFi or Autonet Mobile accessories. Your CarFi or other Autonet Mobile accessories become excessively hot to the touch.
Technical Specifications of Autonet’s CarFi Led status overview-General usage Status LED (Blue) LED not lit LED slow blink LED fast blink LED solid Indicates CarFi is not connected to power, or has been recently turned on (Please note: Blue LED does turn off for approximately 15 seconds at startup) CarFi is in sleep mode (if there are no Wi-Fi users connected to it, the unit will go into sleep mode and automatically reconnect once a device is attached) CarFi is acquiring the cellular network (after wakin
Technical specifications (continued) LAN (Local Area Network)/Connector Specifications 802.
Installation Instructions Safety Precautions The Autonet Mobile installation instructions must be followed to minimize potential interference with other electronics on the vehicle. WARNING: To prevent injury or fire, take the following precautions: When extending the ignition, battery or ground wires, make sure to use automotive grade/UL approved wires with a min. 18 AWG. To prevent a short circuit, never insert or leave any metallic objects (such as coins or metal tools) inside or around the unit.
Installation Instructions (continued) Connect the 12V positive power wire for CarFi, directly from the ignition power source. Installing the wiring in the inline harness may cause blown fuses, etc. Installing it directly to the car battery can deplete the battery and possibly cause a “dead” battery scenario. When installing the wiring, do not run along any sharp chassis edges or through any exposed sharp chassis openings. Use insulation grommets or other appropriate insulation materials.
Installation Instructions (continued) Fastening CarFi to the Vehicle Use the appropriate fasteners to attach the docking unit to the vehicle. Do not over tighten the screws or fasteners. When making a hole or openings in a side panel, under a seat, in the trunk, in the rear deck or somewhere else in the vehicle, check that there is nothing hazardous on the opposite side such as a gas tank, brake line, battery or wiring harness.
Care and maintenance of CarFi Although designed specifically for the stringent environment of an Automobile, CarFi must be handled similar to any typical electronic device. Follow these guidelines in using and maintaining your device: If CarFi becomes excessively dirty, turn off the ignition power, remove CarFi unit from the docking station and wipe the enclosure with a dry silicone cloth or soft cloth. Do not spray the enclosure with any household cleaners or liquids of any kind.
Regulatory Information (To maintain compliance with FCC exposure guidelines, use only accessories supplied or approved by Autonet Mobile Inc.) Exposure to Radio Frequency Signals Autonet Mobile is a low power radio transmitter and receiver. When it is turned on, it sends out and receives RF signals.
Important Safety Information Please read this Safety Policy concerning the usage of CarFi suitable for use in motorized vehicles (“Autonet Mobile”) before operating CarFi. Retain this Safety Policy for your future reference. Accessories Use only accessories manufactured or approved by Autonet Mobile, Inc. with CarFi. The use of any accessories not manufactured or approved by Autonet Mobile, Inc. for use with CarFi may be dangerous and may void the warranty.
Important Safety Information (continued) Pacemakers If you have a pacemaker, you should consult a physician or the manufacturer of your pacemaker if you have questions regarding the effect of RF signals on your pacemaker. If you have a pacemaker, ensure that you are using CarFi in accordance with the safety requirements for that particular pacemaker, which may include the following: Always keep CarFi more than 20 cm (7 Inches) from the pacemaker when CarFi is turned on.
Important Safety Information (continued) Blasting Areas To avoid interfering with any blasting operations, turn CarFi off when in any “blasting area” or in any area posted: “turn off two-way radio.” Obey all signs and instructions. Potentially Explosive Atmospheres Turn CarFi off when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire and result in bodily injury or death.
Important Safety Information (continued) Foreign Objects and Liquids Never push objects of any kind into CarFi or any Autonet accessories because such insertion may cause components to short out and result in a fire or electrical shock. Do not use CarFi or any other Autonet accessories near or in water, or if wet. Never spill liquid of any kind on CarFi or any Autonet accessories. Stability Do not place CarFi or any Autonet accessories on any unstable surfaces.
Important Safety Information (continued) Adjustments to CarFi Adjust only those controls for CarFi that are discussed in the instructions contained in any guide provided by Autonet Mobile, Inc. An improper adjustment of other controls for CarFi may result in damages and may require extensive work by a qualified technician to restore CarFi or any Autonet accessory, as the case may be. Misuse Do not drop, strike, or severely shake CarFi.
Acceptable Use Policy 1. Introduction Autonet Mobile, Inc’s Acceptable Use Policy (“AUP”) is intended to help enhance the use of the internet by preventing unacceptable use. All users of Autonet Mobile, Inc’s internet services (the “services”) those who access some of our services but do not have accounts (“visitors”), as well as those who pay a monthly service fee to subscribe to the services (“members”) must comply with this AUP.
Acceptable Use Policy (continued) F. Forgery or impersonation. Adding, removing, or modifying identifying network header information in an effort to deceive or mislead is prohibited. Attempting to impersonate any person by using forged headers or other identifying information is prohibited. The use of anonymous remailers or nicknames does not constitute impersonation. Using deliberately misleading headers (“munging” headers) in news postings in order to avoid spam e-mail address collectors is allowed. G.
Acceptable Use Policy (continued) L. Network disruptions and unfriendly activity. Using the services for any activity which adversely affects the ability of other people or systems to use Autonet Mobile, Inc services or the internet. This Includes “denial of service” (dos) attacks against another network host or individual user. Interference with or disruption of other network users, network services or network equipment is prohibited.
Acceptable Use Policy (continued) 3. Reporting Violations of Autonet’s AUP Autonet Mobile, Inc requests that anyone who believes that there is a violation of this AUP direct the information to director abuse department, at: abuse@autonetmobile.com. If available, please provide the following information: The IP address used to commit the alleged violation. The date and time of the alleged violation, Including the time zone or offset from GMT.
Autonet Mobile Software License Important – read carefully. By removing the tamper label or otherwise using the software in your Autonet Mobile In-Car Router, you agree to be bound by the license terms and conditions below. If you do not agree to these terms and conditions you must immediately return your Autonet Mobile In-Car Router in its original condition and packaging to the point of purchase for a refund of your purchase price (after inspection).
Autonet Mobile Software License (continued) Nothing in this document limits your rights under, or grants you rights that supersede, the terms and conditions of any applicable end user license for the open source software. In particular, nothing in this document restricts your right to copy, modify, and distribute that open source software subject to the terms of the GPL and lGPL. As required by the terms of the GPL and lGPL, Autonet Mobile, Inc.
Autonet Mobile Software License (continued) Other Open Source Software Autonet Mobile CarFi is provided with the following software licensed under bsd licenses or other open source software licenses. The software and license details are available from the referenced web-sites. nginx from http://wiki.nginx.org/ openssh from the openbsd project (http://www.openssh.com) madwifi from http://madwifi.org/ WPA supplicant from http://hostap.epitest.fi/wpa_supplicant/ hostapd from http://hostap.epitest.
Autonet Mobile Limited Warranty and Liability No warranties of any kind are provided by Autonet Mobile, Inc. With respect to this product, except as stated in Autonet Mobile Limited Warranty below. Autonet Mobile, Inc. warrants to the original end user purchaser (“you”) that the product shall be free of defects in materials and workmanship under normal use for one (1) year from the original date of purchase (the “warranty period”).
Autonet Mobile Limited Warranty and Liability (continued) The foregoing warranties do not extend to: (i) nonconformities, defects, or errors in the product due to accident, abuse, misuse, or negligent use of the product or use in other than a normal and customary manner, environmental conditions not conforming to Autonet Mobile, Inc.
Legal Disclosure Copyright © 2011 by Autonet Mobile, Inc. All rights reserved. No part of this publication may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from Autonet Mobile, Inc. Autonet Mobile, Inc. Reserves the right to revise this publication and to make changes in content from time to time without obligation to provide notification of such revision or change. Autonet Mobile, Inc.
For technical support please call Autonet Mobile customer service center: 1-800-977-2107 Autonet Mobile assumes no responsibility for the configurations, security, or data files on your wireless device resulting from connection to Autonet Mobile’s network. Anti-virus, privacy and security protection is the responsibility of the user. Do not operate CarFi while driving or perform any function that takes your attention away from safely operating your vehicle.
Autonet Mobile customer support line: 1-800-977-2107 © 2011 Autonet Mobile Inc. P/N: 186-1100-001, rev.
