User's Instructions

ADC Automotive Distance Control Systems GmbH | Peter-Dornier-Straße 10, 88131 Lindau
www.continental-corporation.com
End user information
2018-11-16
Device description:
Short Range Radar Sensor SRR3-B
FCC ID:
OAYSRR3B
The device under test is manufactured by the grantee (ADC Automotive Distance Control
Systems GmbH) and sold as an OEM product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033,
15.15(b) etc…, the grantee must ensure that the end-user has all applicable / appropriate
operating instructions. When end-user instructions are required, as is the case with this product,
the grantee must notify the OEM to notify the end-user.
ADC Automotive Distance Control Systems GmbH will supply the following information to the
reseller/distributor dictating what must be included in the end user’s manual for the commercial
product.
INFORMATION TO BE INCLUDED IN THE END USER'S MANUAL
The following information must be included in the end product user’s manual to ensure
continued FCC regulatory compliance. The ID number must be included in the manual if
the device label is not readily accessible to the end user. The compliance paragraphs
below must be included in the user's manual.
FCC ID: OAYSRR3B
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Radiofrequency radiation exposure information:
This equipment complies with radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance of 20
cm between the radiator and the body of any persons, user or bystander.
FCC Notice:
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
The device is also intended to be operated in non-vehicular (e.g. industrial) environment.