User's Manual

5725 Delphi Drive, Troy, Michigan USA 48098
INFORMATION TO BE INCLUDED IN THE END USER'S MANUAL
The following information (in blue) must be included in the end product user’s manual to ensure
continued FCC and Industry Canada regulatory compliance. The ID numbers must be included in the
manual if the device label is not readily accessible to the end user. The compliance paragraphs below
must be included in the user's manual.
This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
******************************************************************************
******************************************************************************
FCC ID: WU8NB24G175V1
The device under test is manufactured by the grantee (Autoliv ASP, Inc.), and sold as an OEM product. Per
47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc…, the grantee must ensure the end-user has all applicable /
appropriate operating instructions. When end-user instructions are required, as in the case of this product, the
grantee must notify the OEM to notify the end-user.
Autolive ASP, Inc. will supply this document to the reseller/distributor dictating what must be included in the end
user’s manual for the commercial product.
WARNING: Changes or modifications not expressively approved by the party responsible for compliance
could void the user's authority to operate the equipment.
AUTOLIV ASP, INC.