Use and Care Manual

This Log Sp
litter offers an easy solution for splitting your own kindling. Please
follow these important instructions when using your tool.
IMPORTANT SAFETY INSTRUCTIONS
• Only use i
t on even ground if left unmounted; never place on another
surface/base unless securely bolted.
• If bolting to a base, ensure the surface is level and solid, and all 4 sides are
securely bolted.
• Ensure you are using appropriate bolts/ screws depending on the base.
• Only bolt it to a heavy base to prevent it from tipping over while in use; we
recommend bolting to a stump.
• Wear protective eyewear and gloves when using it.
• It is for adult use only and is unsafe for children.
• It is designed to easily split kindling; excessive force is not necessary and
may cause injury.
• Ensure that a circumference of 3m is clear around the splitter to protect
from splintering debris.
• Stay an arms length away from the splitter when in use; do not look
directly over the blade.
• Do not split firewood pieces any smaller than 1” in diameter or firewood
that does not fit securely within the upper blade ring.
USE INSTRUCTIONS
1.
Place it on flat ground or bolt to a raised surface. We recommend
bolting it to a stum
p for the best and easiest use.
2.
oo
d
vertically into the mouth of it.
3.
4.
5. Continue splitting the h
alves using the above method until you’re left
with kindling of your desired thickness.
Using a mallet, begin lightly tapping on the firewood until it sets on the blade
and can stand on its own.
Remove your hand from the firewood and using the mallet, hit the log with
sufficient force until it splits in two. Multiple strikes may be necessary.
CARE INSTRUCTIONS
• It is made of durable cast steel with an all-weather coating and
can be
stored outside year-round.
• Use and wear may cause the all-weather coating to fade; if rust starts to
appear, begin storing it in a covered area if this is a concern to you (rust
will not impact the effectivenes of the tool).
• Avoid hitting it blade with your hammer, which may damage it and
remove the all-weather coating.
Please feel free to contact us at @[e-mail] if you have any questions . Thank you!