ActiveHome2 USB 2-Way Home Automation Inter face Model CM15A
Introduction Basic Setup Thank you for purchasing the X10 ActiveHome2 USB Home Automation Interface. The X10 ActiveHome2 software you purchased, in conjunction with the Interface, lets you control lights and appliances around your home when used with X10 Modules. 1. Download X10 Software. Click on the software link in the e-mail you received titled “New Software Download Link.
Basic Setup Basic Setup Windows XP Users: When you see a notice that the X10 CM15A ActiveHome2 driver has not passed Windows Logo testing, click “Continue Anyway.” Installing these drivers will not negatively affect your computer. 4. Plug in the CM15A Interface (wait until the installation program asks you to connect it). 5. Connect the other end of the USB cable to the CM15A Interface. Plug the Interface into an AC outlet near your PC.
Troubleshooting If you can’t find your link to download the software: You can fill out a form to have the link sent to you again. Go to: http://www.x10.com/support and click on the link for Secure Software Download Link, under Technical Support. Enter your e-mail address and order number to be sent the download link again. Troubleshooting X10 software installation on Windows 98 asks for a disk: If your X10 software asks you to insert an X10 disk when you connect the Interface, follow these steps: 1.
Troubleshooting Troubleshooting Windows 98 or Windows Me says it has found an Unknown Device: If you plug in the Interface and get an “Unknown Device” message, you will have to update the drivers in Windows manually: 1. Go to Device Manager by right-clicking on “My Computer” and selecting “Properties.” Then click on the Device Manager tab. 2. Double click on “Universal Serial Bus Controllers” in the device list, and find the item called “Unknown Device.” 5.
FCC Caution FCC Caution THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Warranty X10.com, a division of X10 Wireless Technology, Inc. (X10) warrants X10 products to be free from defective material and workmanship for a period of one (1) year from the original date of purchase at retail. X10 agrees to repair or replace, at its sole discretion, a defective X10 product if returned to X10 within the warranty period and with proof of purchase. If service is required under this warranty: Call 1-800-442-5065, visit www.x10.com, or e-mail support@x10.com.
