Product Specs

ManualsBrandsAUTEL ManualsElectronicsBATTERY&ELECTRICAL SYSTEM TESTER

Trademarks

Autel

, MaxiSys

, MaxiDAS

, MaxiScan

, MaxiCheck

, and MaxiRecorder

are trademarks of Autel

Intelligent Technology Corp., Ltd., registered in China, the United States and other countries. All other

marks are trademarks or registered trademarks of their respective holders.

No part of this manual may be reproduced, stored in a retrieval system or transmitted, in any form or

by any means, electronic, mechanical, photocopying, recording, or otherwise without the prior written

permission of Autel.

Disclaimer of Warranties and Limitation of Liabilities

All information, specifications and illustrations in this manual are based on the latest information

available at the time of printing.

Autel reserves the right to make changes at any time without notice. While information of this manual

has been carefully checked for accuracy, no guarantee is given for the completeness and correctness

of the contents, including but not limited to the product specifications, functions, and illustrations.

Autel will not be liable for any direct, special, incidental, indirect damages or any economic

consequential damages (including the loss of profits).

IMPORTANT

Before operating or maintaining this unit, please read this manual carefully, paying extra attention to

the safety warnings and precautions.

For Services and Support

pro.autel.com

www.autel.com

1-855-288-3587/1-855-AUTELUS (North America)

0086-755-86147779 (China)

Support@autel.com

For technical assistance in all other markets, please contact your local selling agent.

Summary of content (15 pages)

PAGE 1
Trademarks Autel®, MaxiSys®, MaxiDAS®, MaxiScan®, MaxiCheck®, and MaxiRecorder® are trademarks of Autel Intelligent Technology Corp., Ltd., registered in China, the United States and other countries. All other marks are trademarks or registered trademarks of their respective holders.
PAGE 2
Safety Information For your own safety and the safety of others, and to prevent damage to the device and vehicles upon which it is used, it is important that the safety instructions presented throughout this manual be read and understood by all persons operating or coming into contact with the device. There are various procedures, techniques, tools, and parts for servicing vehicles, as well as in the skill of the person doing the work.
PAGE 3
 Wear safety glasses and protective clothing.  NEVER smoke or allow a spark or flame in vicinity of battery or engine.  Have plenty of fresh water and soap nearby in case battery acid contacts skin, clothing or eyes.  If battery acid contacts skin or clothing, wash immediately with soap and water. If acid enters eye, immediately flush eye with cold running water for at least ten minutes and get medical attention immediately.
PAGE 4
Contents Safety Information ..................................................................................................................................... ii Safety Messages ....................................................................................................................................... ii Safety Instructions ..................................................................................................................................... ii 1 Using This Manual ...............
PAGE 5
1 Using This Manual This manual contains device usage instructions. Some illustrations shown in this manual may contain modules and optional equipment that are not included in your system. Conventions The following conventions are used. Bold Text Bold text is used to highlight selectable items such as buttons and menu options. Example:  Tap OK. Notes and Important Messages Notes A NOTE provides helpful information such as additional explanations, tips, and comments.
PAGE 6
2 General Introduction MaxiBAS B200 - Battery & Electrical System Tester The feature-rich MaxiBAS B200 battery tester applies Adaptive Conductance, a proprietary Autel technology that identifies low-capacity batteries. The B200 can provide a quick health status check of the existing battery, register a new battery and perform advanced battery and electrical system diagnostics. The B200 can also connects to a multimeter to test voltage and current.
PAGE 7
Multimeter 6 7 8 6. Aviation Plug 7. Positive Clamp Cable Port 8.
PAGE 8
Table 2-3 LED Description LED Color Status LED Green Blue Flashing Red Power LED Green Red Description Flashing Green: The tester is communicating via USB cable. Flashing Blue: The tester is communicating via Bluetooth. Battery clamps are connected to the wrong battery terminals.  Solid Green: The tester is powered on and the battery is sufficiently charged.  Flashing Green: The tester is charging; turns to Solid Green after its battery is fully charged.
PAGE 9
3 Getting Started Ensure the unit is sufficiently charged before using. Inspect the Battery Before starting a test, observe the battery for:  Cracking, buckling, or leaking. If you see any of these defects, replace the battery.  Corroded, loose, or damaged cables and connections. Repair or replace as needed.  Corrosion on the battery terminals, and dirt or acid on the case top. Clean the case and terminals using a wire brush and a mixture of water and baking soda.
PAGE 10
the battery.
PAGE 11
4 Service Procedures This section introduces information for technical support, repair service, and application for replacement or optional parts. Technical Support If you have any question or problem on the operation of the product, please contact us. AUTEL NORTH AMERICA  Phone: 1-855-AUTEL-US (288-3587) (855-288-3587) Monday-Friday 9am-6pm EST  Website: www.autel.com  Email: ussupport@autel.
PAGE 12
 Address: 719, Nissou Building, 3-7-18, Shinyokohama, Kouhoku, Yokohama, Kanagawa, Japan 222-0033 Autel IMEA DMCC  Phone: +971 585 002709  Web: www.autel.com  Email: sales.imea@autel.com, imea-support@autel.com  Address: Office 1006-1010, Cluster C, Fortune Tower, Jumeirah Lakes Tower (JLT), Dubai, U.A.E For technical assistance in other markets, please contact your local distributor.
PAGE 13
5 Compliance Information FCC Compliance FCC ID: WQ8BATS-BT508 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
PAGE 14
Directive（EU）2015/863. IEC62321 CE COMPLIANCE This product is declared to conform to the essential requirements of the following Directives and carries the CE mark accordingly: EMC ETSIEN301489-1 V2.2.3（2019-11） ETSIEN301489-17 V3.1.
PAGE 15
6 Warranty Limited One Year Warranty Autel Intelligent Technology Corp., Ltd.