User Manual EVO Lite Series V1.0 z 2021.
Terms for Usage Thank you for your interest in the industry aircraft products provided by Autel Robotics Co., Ltd (hereinafter referred to as “Autel Robotics”). Please read the following terms carefully and acknowledge that you have understood and agreed the following terms, conditions and safe operation guide. Trademark Information The trademarks EVO Lite™, EVO Lite+™, Autel Sky™, Autel SkyLinkTM and Autel Robotics® are the registered trademarks of Autel Robotics in China and other countries/regions.
Data Storage and Use The backup service function of this product is disabled by default, so user and flight information will not be uploaded or propagated through mobile device. When Autel Sky APP is connected with an aircraft, the flight log including the flight remote sensing data will be uploaded and saved in the Autel Robotics data server.
Table of contents Chapter 1 Read Instructions........................................................................................................5 1.1 Legend keys...................................................................................................................5 1.2 Product document..........................................................................................................5 1.3 Download Autel Sky App...........................................................................
Chapter 5 Flight........................................................................................................................ 56 5.1 Safe operation guide....................................................................................................56 5.2 Flight preparation........................................................................................................ 58 5.3 Flight operation...............................................................................................
Chapter 1 Read Instructions Thank you for your purchase of EVO Lite series and welcome your experience in Autel Robotics products. With this Manual, you can understand the features of EVO Lite series and learn to operate this aircraft and remote controller optimally. Before first use of EVO Lite series, please read this Manual and attached documents and get ready this Manual at any moment for reference. 1.1 Legend keys Please pay attention to the legend keys in this Manual.
1.3 Download Autel Sky App Autel Sky App can provide real-time image transmission, senior flight and camera control methods for your mobile device. App supports Android 6.0 , iOS 13.0 and above systems. You can download in the following two ways: Method one: Search for Autel Sky in the App Store or Google Play, and click INSTALL. Method Two: Visit the App download page of Autel Robotics' official website and scan the QR code to download: www.autelrobotics.com/download/App_download.
Chapter 2 Aircraft EVO Lite series are the four-rotor UAVs with folding body. EVO Lite series UAVs cannot only have indoor and outdoor steady hovering, intelligent flight and other advanced functions but also have powerful flight performance with the maximum flight speed up to 68km/h and the longest flight time up to about 40 minutes. EVO Lite series UAVs include EVO Lite and EVO Lite+, the camera of which adopts 1/1.28 inch and 1 inch CMOS image sensors respectively.
2.
⑭ Ultrasonic sensor ⑯ Downward vision system ⑮ Downward LED 2.2 Flight indicator The aircraft has one LED indicator at the end of each arm. The front LED shows steady red to help you to find the head direction. The rear LED shows the current flight status of aircraft.
B - Normally on Y - Normally on Aircraft under calibration B - Normally on G - Normally on Calibration successful B - Normally on Y - Normally on Calibration failed Aircraft and remote controller are pairing B - Rapid flash G - Rapid flash Aircraft under pairing B - Rapid flash G - Normally on 5S Pairing successful B - Rapid flash R - Normally on 5S Pairing failed Upgrading B - Rapid flash G - Rapid flash Aircraft under upgrading B - Normally on G - Normally on Upgrading successful B
2.3.1 Battery use 1. Check battery level The battery indicator is divided into LED 1, LED 2, LED 3, LED 4. The position of each indicator is shown in the figure below. When the battery is turned off, press the power button for 1 second and then release it quickly to check the battery level. LED will indicate the current battery level, as shown below.
2. Turn on battery The battery shall be turned off before it is installed. After installation, long press the power button for 3 seconds. The battery level indicator will indicate the current battery level. 3. Turn off battery Long press the power button for 3 seconds to turn off battery. If the battery has been installed on aircraft, LED 1 and LED 4 will flash for five times to remind the shutting down. After all battery level indicators are turned off, take the battery out of the aircraft. 4.
6. Charge aircraft battery The aircraft battery and remote controller can use the charger and cable provided for charging. Before each use, the battery shall be fully charged. 1）Connect the adapter to AC power.. 2）Press and hold the disconnect button on both ends of the battery, and connect one end of the charging cable to the charging slot of the aircraft battery. 3) Under the charging state, the aircraft battery level indicator will flash circularly.
7) Overdischarge protection: the battery will automatically disconnect the power output function when it is not used and completes the self-discharge period. This function is disabled in flight. 8) Short-circuit protection: the power supply will be disconnected once the short circuit is detected. 9) Power-down mode: the battery will turn off if there is no operation within 30 minutes.
optimal to warm up to 20℃ above. Due to the battery output power limitation under the low temperature environment, the wind resistance of aircraft will reduce and its flight performance will degrade. Please operate with care. When the battery is used in low temperature environment (0~5°C), the battery shall be full. The discharge capacity of battery will reduce when it operates in low temperature environment, so first turn on the aircraft to warm up the battery.
Autel Robotics will assume no responsibility for any consequence due to the use of non-official standard charger. 3. Storage and transportation The battery shall be protected from close contact with water source or heat source when storage. The battery shall be stored in a dry and well-ventilated place in room temperature (ideal temperature of 22°C~28°C (72°F~ 82°F)). The battery shall be kept out of the reach of children and pets.
① Shock absorber ⑤ Rolling axis motor ② Camera ⑥ Yawing axis motor ③ UV Filter ⑦ Rotating axis motor ④ Pitching axis motor EVO Lite+ gimbal EVO Lite+ is provided with 3-axis stabilization, and the camera includes a built-in 1 inch CMOS sensor to record 6K high-definition video. You can use the gimbal pitching thumbwheel of remote controller or Autel Sky App to adjust the gimbal pitch angle within the range of -90º~30º.
The gimbal includes two working modes: Stabilization mode The rolling axis remains horizontal while the pitching axis remains the user-defined angle. This mode is used to capture stable image and video. FPV mode The rolling axis remains consistent with the rolling direction of the aircraft while the pitching axis remains the user-defined angle. This mode is used for first-person perspective.
2.4.2 Camera overview EVO Lite camera is featured by 1/1.28 inch sensor, 50m effective pixels, lens aperture of F1.9, and focus of 0.5m and above. It can record 4K60 high-definition video. EVO Lite+ camera contains one 1 inch sensor and can support 20m still photo shooting and 6K high-definition video recording, and its aperture is adjustable within F2.8~F11. The focus is 0.5m and above.
Micro SD card. Without Micro SD card, it is also allowed to take photo or record video but the image will be directly stored in the mobile device. Warning Never insert or pull Micro SD card when the aircraft is on. If the Micro SD card is inserted or pulled during video recording or the battery is removed when power on, the Micro SD card may be damaged to cause data loss.
2.5.1 Install propeller 1. Confirm that the aircraft has been turned off. 2. Select the propeller matched for each motor. 3. Forcibly press down the propeller and rotate it along the locking direction till that it is installed firmly. Propeller With white mark Without white mark Schematic diagram Installation position Legend Installed to the mount with white mark Installed to the mount without white mark Locking direction ( ): rotate the propeller to tighten it as shown in the figure.
It is always necessary to take down the propeller before motor test. Please use the special propeller for Lite series provided by Autel Robotics. Do not use the propellers of different models. In the case of blade replacement, use the two blades in the same package. Never mix with the blades in other package. Never modify the physical structure of motor without approval. Never cover the motor air outlet or the air outlet on the aircraft shell. 2.
2.6.1 Flight mode EVO Lite series supports the standard, ludicrous and smooth modes which can be switched by APP. 1. Standard mode Use the GPS module and downward vision system to realize the accurate hovering, steady flight and quick shot functions of aircraft. In the case of good GPS signal, the GPS will be used for precise positioning; In the case of poor GPS signal, the vision system will be used for positioning when the light conditions are as required.
The aircraft will enter the attitude (ATTI) mode when the GPS signal is poor, the compass is disturbed and the vision positioning conditions fail to be met. Under the ATTI mode, the aircraft will drift horizontally, and the intelligent flight function and the return function will not be available. Therefore, the aircraft under this mode cannot realize spot hover and automatic brake, so it shall be landed on a safe position as soon as possible to avoid the occurrence of accident.
when your aircraft is lower than the altitude, the aircraft will rise to 30m and then return. If you enable the function within a radius of 10m around the return point, the aircraft will automatically land on the spot. EVO Lite series can use its forward vision system to detect and avoid the obstacles on the flight course. If the forward vision system is not enabled during return, the aircraft will not automatically avoid the obstacles.
When the aircraft battery level reaches 25% (low battery alarm), if the horizontal distance between the aircraft and the return point is less than 50m, the aircraft will not carry out the auto return process. If there is no available GPS in the case of low battery alarm, the aircraft will not carry out the auto return process. The aircraft will enter the ATTI mode and continue to be controlled. When the battery level reaches 15% (serious low battery alarm), the aircraft will land automatically.
2.6.3 Compass calibration The compass has been calibrated in factory, with no need for calibration by user normally. If the compass indicates the error information, or the flight direction of the aircraft is not consistent with the control input, or the flight place is far from the calibrated distance, please carry out the following calibration procedure. Warning The compass is very sensitive to the electromagnetic interference that may cause the compass error and the flight quality reduction.
2. Hold the aircraft and make it horizontal, and then rotate the aircraft till the rear LED indicator of the aircraft is normally on green. 3. Hold the aircraft and make it vertical with the head downwards, and then rotate the aircraft till the rear LED indicator of the aircraft is normally on green. 4. Hold the aircraft with the side downwards, and then rotate the aircraft till the rear LED indicator of the aircraft is normally on green.
Please keep away from the metal or electric object, and maintain the aircraft at about 1.5m above the ground. 2.7 Binocular vision system The vision system use the image data to calculate the distance between the aircraft and the potential obstacles. Once any obstacle is detected, the system will stop the aircraft.
Remark The vision system has dead zone outside its covering range. It is necessary to pay attention to the ambient environment and App notice during flight to ensure safety. Do not operate the aircraft in a complex environment where there is insufficient light, small object (such as twig, line, net), moving object, transparent surface (such as window) or reflected surface (such as mirror). In the case of flight with car or other vehicles, please select a field or closed road for driving.
– Remove the surface film, sticker and other covers. – Clean of water drop, fingerprint, dirt, etc. (by non-dust cloth instead of alcohol and other organic solvents). – Return to repair if the surface has shedding, crack, scratch or wear, etc. 7. In order to avoid disturbing the ultrasonic system, do not use 40 kHz ultrasonic device, such as ultrasonic range finder, fault detector, cleaner or welding machine.
Chapter 3 Remote controller EVO Lite series adopts the new generation of Autel Skylink image transmission technology of Autel Robotics, has strong anti-interference capability and supports the double-emission and double-receiving of 2.4GHz, 5.8GHz and 5.2GHz. It can complete the control and setting of aircraft and camera within at most 10km communication distance (FCC, no interference, no blocking) and can display a high-definition picture in mobile device in a real-time manner by Autel Sky App.
⑤ Return button Command the aircraft to return waypoint. ⑥ Command stick Control the direction and motion of aircraft. ⑦ Mobile device support It is used to fix the mobile device with the adjustable viewing angle. ⑧ Antenna The frequency for communication with aircraft is 2.4GHz / 5.8GHz / 5.2GHz. ⑨ Mobile device interface It is used to connect the mobile device. ⑩ Photo/video button Start or stop taking photo/recording video. ⑪ User-defined button Use Autel Sky to set functions.
3.2 Use remote controller 3.2.1 Turn on/off remote controller 1. Startup Press the power button ( ) for 2s till that a short beep sound appears. 2. Shutdown Press the power button ( ) for 2s till that a short beep sound appears. Important Be sure to turn on the remote controller before the aircraft power supply is connected. Be sure to turn off the aircraft power switch before turning off the remote controller. 3.2.2 Charge remote controller 1.
3.2.3 Remotely control aircraft The remote controller includes Mode 1, Mode 2 and Mode 3 based on operation habit and can also be self-defined in Autel Sky App. The beginner is recommended to use the Mode 2 as control mode.
Mode 3 Important The control mode of the remote controller is American manipulator by default. 3.2.4 Control camera 1. Photo/video button: short press the button to take photo or start/stop recording video. 2. Gimbal pitch control thumbwheel: toggle it to control the pitch angle of gimbal. 3.
3. Move the left and right command sticks and thumbwheel in turn to their maximum extent in the direction of the arrow on App. When the calibration of a direction is completed, the arrow in the direction will become blue.
3.4 Remote controller pairing The remote controller and the aircraft have been paired in the factory. If the remote controller needs to be paired again after replacement, please follow these steps: Method 1 1. Turn on the aircraft and the remote controller, double-click the aircraft battery button. The LED on the rear of the aircraft will flash quickly to show it is ready to pair. 2.
3.5 Optimum communication range When controlling the aircraft, it is necessary to timely adjust the orientation and direction between remote controller and aircraft. When the antenna plane directly faces the aircraft, the signal quality between the remote controller and the aircraft can achieve the optimal condition. It is necessary to maintain the aircraft within the best communication range when controlling the aircraft.
Chapter 4 Autel Sky App Autel Sky App integrates flying, shooting, editing and sharing functions, with the built-in simple and beautiful interactive interface, straightaway flight teaching and powerful and usable new editor, to enable that the user can get a quick start and enjoy the aerial photography. 4.1 Activation 4.1.1 Device activation When using the EVO Lite series for the first time, follow these steps to activate: 1. Unfold the aircraft arms, remove the gimbal cover, and turn on the aircraft. 2.
Important The user can purchase the Autel Robotics Care only after the activation is successful. The remote controller and the aircraft are paired by default at the factory. After replacing the remote controller or the aircraft, refer to section 3.4 for pairing.
4.2 Interface introduction 4.2.1 Home page 1. Album User can view and edit photos and videos in the album. The album includes SD card, internal memory, and device storage (Autel Sky) options. Photos and videos can be downloaded to local album. Click the “Create” option to select templates or tools for manual clipping.
Remark If the aircraft is not connected or the SD card is not inserted, the SD card option will not be displayed. The device storage is the default option. 2. Skill center Click the “Skill Center” option to select the product type and view the videos and instructions. 3. Personal center View the personal account, flight log, user terms,Autel care, and device management.
4.2.2 Camera interface 1 2 3 4 5 6 7 8 9 10 11 12 13 19 18 17 16 15 14 Important The user can slide the image transmission interface up to hide all the information and only display the image transmission screen. 1. Home page Click it to return to homepage. 2. Flight Mode Indicate the current flight mode. 3. Device status Indicate the flight status and various warning information of aircraft. In the case of abnormal status, click it to view the detailed information. 4.
5. Remote controller’s battery level Indicates the current remaining percentage of the remote’s battery. 6. Aircraft battery level Indicates the current remaining percentage of the aircraft battery. 7. Remaining flight time Indicate the remaining flight time of aircraft based on current battery level. 8. Obstacle avoidance Indicate whether the obstacle avoidance sensors have been turned on. 9.
2) Control - Unit: Set default units to metric (km/h or m/h) or imperial (mph/h) - Command stick mode: set the command stick mode as mode 1, mode 2, or mode 3. - Flight mode: set the control speed of the aircraft and gimbal. Options include smooth mode, standard mode, and ludicrous mode. - RC customizable button: click or double-click the customizable button on the left to set a custom function. - RC calibration: follow the prompt steps to calibrate the remote controller.
11. Shooting setting Set the shooting parameters. 12. Zoom Switch the zoom factor. 13. Shooting button Click the button to trigger the camera or start/stop recording video. 14. Album Click to enter the album page. 15. Shooting mode Photo: set shooting mode between (single/burst/AEB/timer), resolution, white balance, HDR, etc. Video: set shooting while recording, video frame rate, resolution, HDR, etc. Quick shot: select from five cinematic modes: fade away, rocket, orbit, flick, and rotate.
Important Only the EVO Lite equipped with a four-axis gimbal supports rotate quick shot and rotate hyperlapse shooting. Only the EVO Lite+ supports aperture priority shooting mode. 16. Attitude Indicator Display the current aircraft position, aircraft nose orientation, operator position, home point position, and flight status parameters. H 800m 34m/s: Vertical distance and flight speed between aircraft and home point.
- Positioning: quickly lock the position of aircraft, remote controller, or home point on the map. - Find my drone: find the missing aircraft by activating flashing and beeping. 18. Gimbal Display the pitch angle of gimbal. 19. Tap to takeoff/land Click the takeoff ( ) / landing ( ) icon, hold and scroll it to takeoff/land the aircraft. The aircraft can be directed to land at the home point, or vertically land at its current position.
4.3 Camera function 4.3.1 Quick transfer The photo and video can be directly downloaded from EVO Lite aircraft to the mobile device at a transmission rate up to 20MB/s through Autel Sky App. Operating procedure 1. Turn on the aircraft power supply and place the aircraft on the ground. 2. Connect mobile phone to the remote controller, operate Autel Sky App, and pair aircraft and the remote controller. 3.
4.3.2 One-click quick shot The quick shot is shot by four shooting modes, namely fade away, rocket, orbit and flick. The aircraft automatically flies according to the selected shooting mode and continues to shoot for a specific time. Finally, it automatically generates a short video to support continuous editing and rapid sharing in the App. Fade away: the aircraft rises while moving back, and the lens follows the object for shooting.
record video and return the starting point after the completion of shooting. 4. After shooting, click the album to view the short video, and continue to edit it in APP and share it to other social platform. 5.
4.3.3 Portrait Mode The portrait mode automatically recognizes the subject through the AI algorithm and blurs the background to highlight the subject. The user can choose a different scene mode, such as close, medium, or long shots according to the number of people. Close: suitable for 1-3 people. Medium: suitable for 3-5 people. Long: suitable for 5-10 people. Operating procedure 1. Make sure the aircraft is fully charged. Run the aircraft and rise to 2.5 m or higher. 2.
When the distance between the aircraft and the operator is greater than 30 meters, the App will open a window to ask the user whether it should fly to the directed location. Select "Confirm" and the aircraft will fly to that location. As the aircraft is flying to the corresponding scene, the user can interrupt the flight by moving command sticks and adjusting the shooting position by themself.
4.3.4 Night Mode Night mode is suitable for shooting at night or in other low-light environments. Based on the Autel Moonlight Algorithm, the EVO Lite series can shoot clean, delicate, low-noise night scene photos and videos with high ISO in extremely dark conditions. When shooting night scene videos, users can choose three modes to deal with different light environments. Standard: The shooting effect is the same as the normal shooting mode.
Chapter 5 Flight EVO Lite series adopts the unique portable design and has been assembled in factory. In order to ensure safe operation of UAV, please read the following instructions and warnings before first flight. 5.1 Safe operation guide 5.1.1 Flight environment Please abide by the local laws and regulations on UAV flight. Fly only in the designated aircraft movement area, and use Autel Sky App to set the satisfactory distance and height limits.
Ensure that the aircraft motor, gimbal and camera can work normally after power on. Ensure that all alarms and errors displayed in Autel Sky App have been processed. Ensure that Autel Sky App and its firmware have updated to the latest version. Ensure that you are familiar with the control and operation of the aircraft. Only use the accessories supplied with the aircraft or sold or authorized by Autel Robotics for the aircraft.
5.2 Flight preparation 5.2.1 Battery preparation 1. Install aircraft battery Turn off the battery power switch before installing battery, and insert the battery into battery compartment. 2. Charge aircraft battery and remote controller 1) Charge aircraft battery Press and hold the disconnect button on both sides of the battery, insert one end of the charging cable into the battery charging slot, and connect the other end to the AC power supply through the power adapter (rated power 63.75W).
Important It is recommended to use the official charging cable and power adapter. 5.2.2 Remote controller preparation 1. Connect mobile device Extend the mobile device support, place the mobile device on the support, insert the mobile phone port of the remote controller connector into the mobile device (it is allowed to replace corresponding Micro USB, USB-C, Lightning interface adapter for remote controller). Ensure that the mobile device has firmly been inserted into the slot. 2.
Be sure to turn off the aircraft power switch before turning off the remote controller. Turn off the aircraft power switch before the arms are folded. First extend the rear arm and propeller and then the front arm. 2. Turn on aircraft Press the power button for 3s to turn on the aircraft. The power indicator will be lit to indicate the current battery level. 3. Pair aircraft and remote controller Refer to the paragraph 3.4 for this operation procedure. 5.
5.3.2 Takeoff Remark The aircraft cannot fly when the battery level is 15% or below. Stay away from the rotating propellers and motors. 1. Manual takeoff 1) As shown in figure, press the left and right sticks for 1s to start motor. or 2) Slowly push up the left stick. Warning Motor will generate heat during operation. Please operate with care. If you are the first time to control the aircraft, please move the command stick gently till that you are familiar with its operation. 2.
2) The aircraft will automatically rise to the height of about 2.5m. During the rising, you can adjust the position of the aircraft by using the left command stick. Warning Never take off on moving object, such as moving ship and vehicle. 5.3.3 Landing Important Always land on a flat and open surface. 1. Manual landing 1. Find an appropriate aircraft landing position. 2. When the aircraft arrive above the target position, release the command stick to make the aircraft hover. 3.
In the case of low battery alarm, the rear LED of the aircraft will flash red. At this time, it is necessary to return the safe landing point as soon as possible. 5.4 Flight restrictions According to the controlled airspace and UAV management regulations of the ICAO and the air traffic management authorities of each country, UAV must fly in the specified airspace.
APP will give a warning information when the aircraft enters the area of 2km from the airport. 5.4.2 Height limit and distance limit The maximum height is used to restrict the flight height of the aircraft, and the maximum radius is used to restrict its flight distance. User can make settings in Autel Sky App. In the case of valid GPS, the flight restriction and the height and distance limits in special area will jointly affect the flight.
Chapter 6 Maintenance and service 6.1 Firmware update In order to optimize the system performance of EVO Lite series aircrafts, Autel Robotics will update relevant firmware when necessary. 6.1.1 Download and update firmware User can use the following two methods to download firmware package. Method 1: download firmware upgrade package from Autel Sky app 1. Turn on your remote controller and aircraft, connect your mobile phone to the remote controller, operate Autel Sky app. 2.
www.autelrobotics.com. 2. Insert SD card into your computer, save the downloaded firmware package under the root directory of SD card. 3. Turn on your remote controller and aircraft, connect your mobile phone to the remote controller, operate Autel Sky app. 4. Insert SD card into the aircraft for automatic update. User can view the upgrade process on App interface. 5. Please restart the aircraft and the remote controller after update.
use any strong cleanser, detergent or chemical. Keep the battery charger clear of other conducting materials. Avoid the aircraft and its accessories falling, especially falling on a hard surface. Carefully check all components after each collision or impact. Please contact the customer support of Autel Robotics for any damage. Only use the accessories authorized by Autel Robotics, such as charger. We will provide no warranty for any accident due to the use of unapproved accessories. 6.
altered; When the product has appearance, decorative or structural (such as frame and non-operating component) defects; When the damage is caused because it is not installed, used and operated as instructed by the manual; When the product damage is caused because of the use of the self-programming or non-official software; When the damage is caused by the reliability and compatibility problems when the product is used with the component of a third party other than Autel Robotic; When the
6.4.2 Maintenance service If you want to send in your equipment for repair, please mail to support@autelrobotics.com or call Autel Robotics’ customer support: (844) 692-8835.
Chapter 7 Technical Specification Takeoff weight 835g Dimensions (including blades) Folded: 210×123×95mm Unfolded: 427×384×95mm Wheelbase 368mm Max level flight speed (no wind, near sea level) 5m/s (ludicrous), 4m/s (standard), 3m/s (smooth) 4m/s (ludicrous), 3m/s (standard), 2m/s (smooth) 18m/s (ludicrous), 10m/s (standard), 5m/s (smooth) Max takeoff altitude 5000m Max flight time (no wind) 40min Max ascent speed Max descent speed Aircraft Max hovering time (no wind) Max flight distance (no w
Yaw: -80°~80° Rotate: -360°~360° Stabilization 4-axis Max control speed (pitch) 30°/s Angular vibration range ±0.003° Mechanical range Gimbal (Lite) Controllable range Stabilization 3-axis Max control speed (pitch) 30°/s Angular vibration range ±0.003° Forward Backward Perception system Downward Operating environment Sensor Camera (Lite) Pitch: -135°~45° Roll: -45°~45° Yaw: -90°~90° Pitch: -90°~ +30° Yaw: -80°~ +80° Lens Shooting mode Accurate measurement range: 0.
ISO range Shutter speed Portrait blur adjustable, EV not adjustable Shutter priority (S gear): Shutter/EV adjustable, ISO automatic Video: ISO100 ~ ISO6400 Photo: ISO100 ~ ISO6400 Night mode: ISO up to 64000 Photo mode: 1/8000 ~ 8s Other: 1/8000 ~ 1/frame rates Real-time image transmission portrait blur and photo portrait blur Defog mode Support Zoom range Digital zoom: 1 ~ 16 times Lossless zoom: 4K: 2 times; 1080p: 4 times Note: 4K: more than 2 times is the digital zoom, otherwise is lossless zoom 10
Video: 4K P25 Panorama Horizontal/Vertical/Wide-angle/Spherical Original image: 4096*3072, JPG/DNG Supported file system Fat32, exFat Video format MP4/MOV (8-bit) WIFI transfer 20MB/s Sensor Lens Shooting mode Camera (Lite+) ISO range Shutter speed Portrait blur CMOS: 1 inch Effective pixels: 20M Pixel size: 2.4μm*2.4μm FOV: 82° Equivalent focal length: 29mm Aperture: f/2.8 ~ f11 Focus range: 0.
zoom, otherwise is lossless zoom Photo format Photo resolution Photo shooting mode JPG (8bit)/ DNG (12bit) / JPG+DNG 5472x3648 (3:2，default) 5472x3076 (16:9) 3840x2160 (16:9) Single shot Burst shooing: 3/5 Auto exposure bracketing(AEB): 3/5 shots Interval: 2s/3s/4s/5s (default)/6s/...
Adapter Aircraft battery App Storage Interface type Type C Transmission system Autel SkyLink Realtime transmission quality Transmission distance<1km: 2.7K 30fps Transmission distance>1km: 1080P 30fps Transmission bitrate 90Mbps Transmission delay ≤200ms Input 100-240V/50-60HZ Output 12.75V⎓ 5A Rated power 63.75W capacity 6175mAh Voltage 11.13V Max charging voltage 12.75V Battery Type Li-Po 3S Energy 68.
Quick Start Guide
1 Download Autel Sky App Autel Sky App 2 Charge Press and hold the release button on both sides of battery and connect the battery to the adapter.
3 Prepare the aircraft
4 Prepare the remote control
5 Power on �s Autel Sky App �s
6 Start motors (Mode 2) or L L R 7 Take off (Mode 2) L R L R 8 Landing (Mode 2) Please read all documentation before your first flight.
9 Joystick controls (Mode 2)
For more details，see the user manual at： www.autelrobotics.com/download/67 Subscribe for more information Copyright © 2022 Autel Robotics. All rights reserved.
Multi-channel Charger Guidelines
Disclaimer Thank you for purchasing the EVO LiteTM battery multi-channel charger (referred to as "multi-charger"). Please read this statement carefully before using this product. Once this product is used, it is deemed to be an approval and acceptance of the entire content of this document. Please use this product strictly in accordance with this manual, and be sure to pay attention to warnings.
Product Introduction Multi-charger can expand the battery interface to be multiple. It can be used with the EVO Lite standard adapter, which can connect up to 3 EVO Lite batteries for charging. 1 2 Battery port Power port 1 2 Product Use 1. Connect the power supply Connect the EVO Lite standard adapter to the power socket (100-240V), and then plug the charging connector into the power port of the multi-charger. 2. Charge Insert the aircraft battery into the battery port to start charging.
Product Features • Charge management Sequence charging: Priority is given to charging the battery with the highest amount of power remaining, and when it reaches full charge, it will continue to charge the next battery with the highest power. In sequence charging mode, only one battery will be charged at a time. Please unplug once the battery is fully charged. Note: Inserting the battery may interrupt the battery being charged. Specification Operating Voltage ��.
Battery Safe Operation Guidelines
Battery Safety EVO Lite series is powered by a lithium-ion polymer battery. Improper use of lithium polymer/lithium-ion batteries can be dangerous. Please ensure that all the following battery usage, charging and storage guidelines are strictly followed. Warning • Only use the battery and charger provided by Autel Robotics. It is forbidden to modify the battery pack and its charger, or use third-party equipment to replace it. • The electrolyte in the battery is extremely corrosive.
or above 40°C (104°F). If the battery is exposed to extreme temperatures, its service life will be shortened. Extreme temperatures may also cause fire, explosion or other permanent damage. • Exposure to temperatures below 5°C (41°F) will speed up battery discharge. • Do not use the battery in a strong static electricity or electromagnetic environment. • Do not expose the battery to open flame, explosives or other hazards. • If the aircraft falls into water, remove the battery immediately after recovering it.
Battery Storage Avoid placing the battery within close contact of water or heat sources while in storage. Batteries should be stored at room temperature (ideally 22°C to 28°C (72°F to 82°F)) in a dry, well-ventilated area. Other notes are as follows: • Batteries should be stored out of the reach of children and pets. • Do not store the battery in direct sunlight or near sharp objects, water, metals or reactive chemicals. • Storing the battery in extreme temperatures will shorten its life.
Turn on the battery Before installing the battery, make sure it is powered off. After installation, press and hold the power button for 3 seconds. The battery level indicator will show the current battery level. Turn off the battery Press and hold the power button for 3 seconds to turn off the battery. If batteries are installed in the craft, LED1 and LED4 will blink 5 times to indicate that the power is being turned off. Once all battery level indicators are off, remove the batteries from the craft.
Additional Features The following features protect and extend battery life. • Storage self-discharge protection：If the battery is stored in a hot environment or not used for 6 days and the charge level is high, the self-discharge protection will be activated. The battery will be automatically discharged to a safe level. This is the default setting, and the discharge process takes 2-3 days.
• Communication.When in use, the vehicle is continuously synchronized with the battery to provide real-time information, including voltage, capacity, current, temperature, etc. • Ultra-low energy mode. If the battery level falls below about 8%, the battery will enter ultra-low power mode to reduce self-consumption of electricity. When the battery enters ultra-low power consumption to recover, it needs to be activated by the charger before it can continue to be used normally.
Specification Capacity 6175mAh Nominal voltage 11.13V Charging limit voltage 12.75V Battery type Li-Po 3S Energy 68.7Wh Charging ambient temperature 5~45℃ Maximum charging power 78W ©2021-2022 AUTEL ROBOTICS CO., LTD. | ALL RIGHTS RESERVED WWW.AUTELROBOTICS.
Disclaimer and Safety Operation Guidelines
Product Terms of Use Thank you for your interest in the industrial aircraft products provided by Autel Robotics. Please read the following terms carefully to confirm that you have understood and agreed to the following terms, conditions and safe operation guidelines. 1. Disclaimer To ensure safe and successful operation of your EVO Lite series aircraft, please strictly follow the operating instructions and steps in this manual.
in the Autel Robotics data server. Unless the user explicitly grants permission through the Autel Sky App, the Autel Robotics Customer Service Team has no right to access the flight log data. After granting this permission, only flight logs within the selected date range can be accessed. Various still images, moving images and data from the aircraft's sensors will be stored on the aircraft's internal drive.
3.1.1 Battery usage When installing or removing the aircraft battery, be sure to turn off the aircraft's power. Other precautions are as follows: • Only use batteries and charging devices sold or authorized by Autel Robotics for the EVO Lite series. Using unapproved batteries or charging devices may cause fire, explosion, leakage or other hazards. Autel Robotics is not responsible for any repercussions caused by the use of third-party batteries or charging devices.
a safe distance from it until it is completely dry. After that, please stop using the battery. You can contact the customer service center to replace it. 3.1.2 Charging batteries It takes up to 90 minutes to fully charge the aircraft battery, but the charging time is related to the remaining power. Other considerations are as follows: • Do not use damaged battery chargers. • When the charger is not in use, disconnect it from the aircraft battery and power supply.
to be transported, be sure to discharge it to about 20%-30%. 3.1.4 Battery disposal • Please fully discharge the battery before putting it in the designated battery recycling bin. • Batteries contain dangerous chemicals; it is strictly prohibited to place batteries in ordinary trash cans. For details, please follow the local laws and regulations on battery recycling and disposal. 3.2 Flying drones safely 3.2.1 Flight environment Please abide by all local regulations regarding drone flight.
the aircraft is powered on. • Ensure that all warnings and errors displayed on the Autel Sky App have been processed. • Ensure that the Autel Sky App and firmware have been updated to the latest version. • Only use accessories provided with this aircraft or ones that are sold or authorized by Autel Robotics for this product. Using unapproved accessories can result in serious safety risks and will void the product warranty. 3.2.
and pets. • The aircraft should be kept away from water and heat sources. • The recommended storage temperature for the aircraft is 22ºC to 28ºC (72ºF to 82ºF). Warning If any part of the aircraft or the remote control fails to work normally or is visibly damaged, please do not fly. Contact the Autel Robotics customer service team: www.autelrobotics.com/page/contact 4. Legal Regulations and Flight Restrictions 4.
