User's Manual

ManualsBrandsAutec ManualsElectronicsRemote Control Transceiver Unit

Table Of Contents

Part C: FJR transmitting unit

Original instructions

AUTEC Dynamic Series

LIFJRE00-01.fm Part C: FJR transmitting unit

ENG

DYNAMIC SERIES

Part C: FJR transmitting unit

INDEX

1 Description ........................................................................................................... C - 2

2 Technical data ...................................................................................................... C - 3

3 Technical data sheet ........................................................................................... C - 3

4 Plates .................................................................................................................... C - 4

5 Light signals ........................................................................................................ C - 4

6 Malfunction signalled by the transmitting unit ................................................. C - 6

Summary of content (8 pages)

PAGE 1
Original instructions DYNAMIC SERIES Part C: FJR transmitting unit INDEX 1 Description ........................................................................................................... C - 2 2 Technical data ...................................................................................................... C - 3 3 Technical data sheet ........................................................................................... C - 3 4 Plates .....................................................
PAGE 2
C-2 Description 1 Description C B B D B E B G A B F A connector for wire control (if present) B actuators (joysticks, selectors, pushbuttons) C STOP pushbutton D display or LED (if present) E LEDs F START pushbutton G S-KEY (electronic starting key) Dynamic Series Part C: FJR transmitting unit
PAGE 3
Technical data C-3 2 Technical data Power supply (battery MBM06MH)................................................................. NiMH 7.2 V Antenna ................................................................................................................... internal Housing material ........................................................................................... PA 6 (20% fg) Protection degree .......................................................................................
PAGE 4
C-4 Plates 4 Plates The transmitting unit has three plates. Plate radio remote control identification plate Position Content On the S-KEY: remove the S- Radio remote control serial KEY to read the plate. number (S/N). Manufacturing year, bar code transmitting unit iden- In the battery housing: remove and transmitting unit identifitification plate the battery to read the plate. cation number (TU ID).
PAGE 5
Light signals The red LEDa ... Meaning ... is off The transmitting unit works correctly. ...blinks The battery is nearly flat. ... is on for 2 secondsb C-5 The transmitting unit does not work correctly. ... blinks onceb At power on, the transmitting unit detects that the STOP pushbutton is activated or damaged. ... blinks twiceb At power on, the transmitting unit detects that one of the commands D2-D20 or SAFETY is activated or damaged (see technical data sheet). ...
PAGE 6
C-6 Malfunction signalled by the transmitting unit 6 Malfunction signalled by the transmitting unit Use the light signals on the transmitting unit to identify the radio remote control malfunction. If the problem persists after the suggested solution has been carried out, contact the support service of the machine manufacturer. Signals Possible reason Solutions The green LED does not switch on when the START pushbutton is The battery is flat.
PAGE 7
PAGE 8