User's Manual

ManualsBrandsAutec ManualsElectronicsTransceiver unit

Original instructions

Dynamic SerieS

Part C: FJMﾠtransmittingﾠunit

inDex

1 Description ............................................................................................................ 2

2 Technical data ....................................................................................................... 3

3 Technical data sheet ............................................................................................. 3

4 Plates ..................................................................................................................... 4

5 Light signals .......................................................................................................... 5

6 Actuators for the display ...................................................................................... 7

6.1 DISPLAY pushbutton ....................................................................................... 7

6.2 Six pushbuttons ............................................................................................... 8

7 Malfunction signalled by the transmitting unit ................................................... 9

AUTEC LIFJME00-06

Summary of content (12 pages)

PAGE 1
Original instructions Dynamic Series Part C: FJMﾠtransmittingﾠunit Index 1 2 3 4 5 6 7 Description ............................................................................................................. Technical data ........................................................................................................ Technical data sheet .............................................................................................. Plates .........................................................
PAGE 2
Description 1 Description aB D c e F G TU ID: XXXXXX K MANIF. DATE XXXX n POWER SUPPLY.....................................................7.2V RADIO MODULE..............................................FSARTBEU2 FREQUENCY RANGE......................................863-870MHz RF OUTPUT POWER.....................................<25mW ERP PROTECTION DEGREE...............................................
PAGE 3
Technical data 2 3 Technical data Power supply (battery MBM06MH) .......................................................................... 7.2V Power supply (battery LPM02) ................................................................................ 7.4V Power supply (battery LPM04) ................................................................................ 7.4V Antenna ...................................................................................................................
PAGE 4
4 Plates Plates The transmitting unit has the following plates: Plate Position Content Key ID 0-1 (if present). radio remote control identification plate Battery housing (if the “ID internal tx memory” is present). Radio remote control serial number (S/N). transmitting unit identification plate Battery housing. Manufacturing year, bar code and transmitting unit identification number (TU ID). technical data plate Battery housing.
PAGE 5
Light signals 5 5 Light signals The FJM transmitting units may have two or four LEDs. A Red LED B Green LED C LEDs for Data Feedback function In both cases, a green LED [B] and a red LED [A] are always available, and they provide information regarding the radio remote control. If the unit has 4 LEDs, the side LEDs [C] are red and provide information coming from the machine (Data Feedback function). Symbol Meaning This symbol indicates the red LED [A]. This symbol indicates the green LED [B].
PAGE 6
Light signals The red LED [A]a … …is off. The transmitting unit works correctly. … blinks The battery is nearly flat. ... illuminates for 2 secondsb a. b. Meaning The transmitting unit does not work correctly. ... blinks onceb At power on, the transmitting unit detects that the STOP pushbutton is activated or damaged. ... blinks twiceb At power on, the transmitting unit detects that one of the commands D2-D20 or SAFETY is activated or damaged (see technical data sheet). ...
PAGE 7
Actuators for the display 6 7 Actuators for the display If the transmitting unit has a display, it can be used through a pushbutton (see paragraph 6.1 ) or six pushbuttons (see paragraph 6.2). Functions carried out by these actuators are decided by the machine manufacturer: the user must be properly trained about them. 6.
PAGE 8
6.2 Actuators for the display Six pushbuttons Functions carried out by the six pushbuttons in order to manage the display, are configurable and are defined by the machine manufacturer. D C LIFJME00-06 B A A Red LED B Green LED C LEDs for Data Feedback function D Pushbuttons to manage the 4.
PAGE 9
Malfunction signalled by the transmitting unit 7 9 Malfunction signalled by the transmitting unit Use the light signals on the transmitting unit to identify the radio remote control malfunction. If the problem persists after the suggested solution has been carried out, contact the support service of the machine manufacturer. Signals Possible reason Solutions The green LED does not switch on when the START pushbutton is pressed, even though both the battery and the power keyswitch are inserted.
PAGE 10
PAGE 11
PAGE 12