User's Manual

ManualsBrandsAutec ManualsElectronicsTransceiver unit

Original instructions

AIR SERIES

Part B:

Conformity and frequencies

(434 and 915MHz)

INDEX

1 Conformity ............................................................................................................. 2

1.1 Conformity of frequency band 433.050-434.790MHz ........................................ 2

1.2 Conformity of frequency band 915-928MHz: FCC and IC ................................. 2

1.3 Conformity of frequency band 915-928MHz: ANATEL ...................................... 3

2 Frequencies ........................................................................................................... 3

2.1 Frequency band 433.050-434.790MHz ............................................................ 4

2.2 Frequency band 915-928MHz .......................................................................... 4

AUTEC LIAIRI11-01

Summary of content (4 pages)

PAGE 1
Original instructions AIR SERIES Part B: Conformity and frequencies (434 and 915MHz) INDEX 1 2 Conformity .............................................................................................................. 1.1 Conformity of frequency band 433.050-434.790MHz ......................................... 1.2 Conformity of frequency band 915-928MHz: FCC and IC .................................. 1.3 Conformity of frequency band 915-928MHz: ANATEL ....................................... Frequencies ..
PAGE 2
Conformity 1 Conformity 1.1 Conformity of frequency band 433.050-434.790MHz Each AIR series' radio remote control working in the frequency band 433.050-434.790MHz complies with the (R&TTE) Directive 1999/5/EC and its essential requirements. Each radio remote control is also in conformity with the harmonised standards provided in the EC Declaration of Conformity. You can find the EC Declaration of Conformity on the website www.autecsafety.com, in the product page of the relevant transmitting unit.
PAGE 3
Frequencies b. c. 3 This radio transmitter has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
PAGE 4
Frequencies The radio remote controls' working frequency is defined by market-specific laws and standards. In order for the system “machine+radio remote control” to be compliant and therefore to be used, it shall comply with such laws and standards: if it does not, the system may be impounded by competent bodies. Autec cannot be held responsible if the radio remote control is set with forbidden frequencies. They automatically search for a free working frequency. 2.1 Frequency band 433.050-434.