1 This product is high precision products, do not fall or impact. 2 Please don’t close to the camera with strong magnetic objects, such as magnets and motors, in addition to avoid the product near the issue of strong radio waves of objects, strong magnetic field may can cause product failure, or destroy images and sound. 3 Please don’t place the camera at a higher temperature or direct sunlight. 4 Please choose the brand Micro SD card, ordinary card can not guarantee normal use.
1.Insert Micro SD card Note: Please select the brand MicroSD card, formatted on the computer and then use, ordinary neutral card can not guarantee the normal use of work. 2.Install and remove the battery A. Pull the cover down can open the battery cover. B. According the battery marked positive and negative symbols and arrows indicate direction, the correct battery into the camera until the installation is in place. C. Battery power indicator: please refer to the icon. D.
6.mode conversion Long press the mode button to turn on, then it will automatically jump to the video mode, short press mode button to switch between video / photo mode. In the mode of video/photo,long press OK button to enter the video/photo/playback/system setting 7. how to set video and video options 1).
Waterproof Housing Bicycle bracket Remote(Optional) Shell Switch support 1 Helmet pedestal Switch support 2 Fixed base Switch support 3 Pedestal 2 3M mat&Wire cable Back clip Bandage Ribbon USB Cable
LCD 2.0 inch IPS HD screen + 1.3 inch screen Color Black WIFI Support Lens 170 wide angle lens Image 24MP(5648*4232) Image 20MP(5120*3840) Image resolution Image 16MP(4608*3456) Image 13MP(4160*3120) Image 8MP(3264*2448) 4K(3840*2160)60/30fps Video resolution 2.7K 2688*1520 30fps 1080P(1920*1080)120/60/30fps 720P(1280*720)240/120/60/30fps Memory Micro SD card (maximum support 128GB) Data Connections USB 2.0/HDMI/WIFI Battery 1050mAh polymer lithium battery Charging time About 2.
FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.