User's Manual

ManualsBrandsAurum Electronics ManualsElectronicsSmart Guard Halogen Light

Manual Contents:

A. 939ASD kit contents

B. 939ASD overview

C. Definition

D. Programming your 939ASD

E. Mounting the 939ASD

F. Driver installation

G. Viewing image

H. Technical Specifications

I. General Information and Safety

J. FCC information

A. 939ASD kit contents

z Model 939ASD Lighting Camera

z Camera driver: CDROM driver for Windows 98/2000/XP

z User Manual

z 1M USB cable & 1G SD card

z Accessory bag: screws, wall plugs, 1pc allen key, 3pcs 1.5V AAA batteries

B. 939ASD overview

Fig. 1

Summary of content (8 pages)

PAGE 1
Manual Contents: A. 939ASD kit contents B. 939ASD overview C. Definition D. Programming your 939ASD E. Mounting the 939ASD F. Driver installation G. Viewing image H. Technical Specifications I. General Information and Safety J. FCC information A. 939ASD kit contents z z Model 939ASD Lighting Camera Camera driver: CDROM driver for Windows 98/2000/XP z z z User Manual 1M USB cable & 1G SD card Accessory bag: screws, wall plugs, 1pc allen key, 3pcs 1.5V AAA batteries B. 939ASD overview Fig.
PAGE 2
C. Definition 1. Definition of front view parts (see fig. 1) Floodlight cover：Open to replace a new halogen lamp. Floodlight：For lighting purpose Halogen lamp：For lighting purpose, please use the correct voltage and watts of halogen light for this product. Halogen lamp, max power is 300W Cam Lens：this is the digital camera lens, please use a soft cloth to clean if needed. PIR lens：Passive Infrared Lens.
PAGE 3
. Definition of side view parts (see fig. 3 & 4) 3 position switch：for functions selection 1) Light + camera + speaker: detection for all day Daytime and nighttime: light, camera and speaker are all in operation 2) Light at night + camera all day + speaker in the daytime Daytime: light is off, camera is on, speaker is on Nighttime: light is on, camera is on, speaker is off. 3) Light at night + camera all day + speaker at night Daytime: light is off, camera is on, speaker is off.
PAGE 4
D. Programming your 939ASD 1. Install/replace the halogen lamp (see fig. 5) Make sure to turn off the power of 939ASD or discount the AC outlet Open the floodlight from floodlight screw by screw driver. Take out the Halogen lamp. Place a new Halogen lamp. * Halogen Lamp is 300W Close the floodlight with screw carefully Fig.5 Please make sure the voltage and polarity are correct before connection. Incorrect voltage will damage the camera. If you are not sure, please contact your retailer. 2.
PAGE 5
. Other settings (see fig. 2) Time control：Turn the time control knob to”+” side to increase the illumination time, turn the control knob to “－“ side to reduce the illumination time. Sensitivity control：Adjust the detector range of Passive Infrared Motion Sensor 8 Positions DIP switch： 1) This product is able to operate with RF wireless receivers.
PAGE 6
Fig. 9.2 F. Driver installation Attention! The software CD-ROM packaged with the camera is designed for PC´s only (not available for MAC). Playing this CD-ROM on a stereo or CD player may cause damage to it. z Unplug the USB cable form PC z Insert the CDROM in CD driver of your PC. z The auto-run program will execute. z Follow the instructions shown on screen form your PC to completely install the driver and application program. z Restart windows.
PAGE 7
Fig. 12 3. Viewing image from universal card reader (see fig. 11) Remove the SD card rubber cover. Push in the SD card to eject SD card form 939ASD. Insert the SD card to universal card reader. You can view the captured image form PC through the card reader. H. Technical Specifications 1. System Requirements and Compatibility： Windows 98/98SE/2000/ME/XP. Pentium III 450MHZ or equivalent processor. 128MB SDRAM or above. VGA image Card with 32MB RAM for minimum, Color 16bit or higher.
PAGE 8
Sensitivity control Floodlight time delay control Product measurements：(L) 190 x (W)180 x (H)315mm. Weight: 1.42 Battery: 1.5V AAA x 3pcs I. General Information and safety Special care instructions!!! z The 939ASD is designed to be weather resistant. Never attempt to immerse the unit to water or any other liquid. This will damage the unit and void the warranty. z Use a soft lens cloth for cleaning lens. Avoid touching lens with fingers.