User's Guide

QUICK START GUIDE
Congratulations on your purchase of the auris amplify Hi-Fi
Wireless Headphone Amplifier!
The following pages explain the features and operations of
amplify. Please take a few moments to read this user guide.
Also read all safety instructions before proceeding. The answers
to most set up and performance questions can be found in this
guide. If you have any further questions about the operation or
use of this product, please contact our customer care team for
assistance on [e-mail]
In the Box
auris amplify
Hands-free Clip Mount
USB Type-C Charging Cable
Quick Start Guide
Overview
Quickly transform your favorite wired headphones into hi-res
Bluetooth
®
headphones with jaw-dropping audio fidelity!
Featuring the best in class Bluetooth audio codecs – such as
Sony LDAC
®
, Qualcomm
®
aptX
™
HD, aptX
™
Low Latency,
aptX
™
, AAC and stereo advanced 768KHz/32bit DAC with
Amplifier, amplify ensures superior Bluetooth audio experience
that will breathe new new life into your wired headphones.
WELCOME!
4
65
7
2
1
3
4
3
2
1
7
6
5Multi-Functional (MF) Button
Vol. Up / Next Track
Vol. Down / Previous Track
3.5mm AUX audio output
Microphone
LED Indicator
USB Type-C port
KEYS AND PARTS
every 2secs after the “Connection sound”.
Step 6: The music on your smart device will now play through
your Headphone! The LED indicator should turn solid.
Sync And Share
Sync two amplify’s together and share your favorite songs –
str
eam the same audio track to separate headphones.
Step1: Place two amplify devices (each plugged to a separate
headphone) close to each other. Press and hold the MF button
of both the devices simultaneously for about 3-5 secs. Release
when ORANGE LED starts flashing on both the devices. Both
the amplify devices are now in sync and ready to be paired.
Step 2: Connect your smart device with amplify by following the
previous pairing instructions.
Step3: You can now stream your favorite songs from your smart
device to two separate headphones simultaneously!
Power OFF
Press and hold the MF button for about 3 secs. ORANGE LED
flashes once right before power off. “Power-off sound” plays
indicating the device is turned off.
QUICK SETUP
The following instructions will help you in setting up and pairing
amplify with your smartphone, computer or tablet after
connecting it to your wired headphone.
Step 1: Plug the 3.5mm (1/8”) audio jack of your headphone into
the 3.5mm AUX audio out
put of amplify.
Step 2: Ensure that your amplify
is fully charged before use.
Power ON
Step 3: Press and hold the Multi-functional (MF) button for 2secs
to power ON. ORANGE LED blinks once and “Power ON” sound
plays when it is on. amplify will automatically go into pairing mode.
The GREEN LED will start flashing every 0.5secs to indicate the
unit is now in discoverable mode and ready to be paired.
(amplify will automatically connect to a device that has been
connected before.)
Pairing
Step 4: Place your smart device within 1 meter (3 feet) range of
amplify. Turn ON Bluetooth on your smart device and go to
Bluetooth preferences.
Step 5: Scan listed Bluetooth devices and select “Auris amplify”
to pair and connect. The GREEN LED indicator will flash twice
2. Multi – Function (MF) Button
Play: Press Once – GREEN LED stops flashing and shows
solid during playback
Pause: Press Once
3. Vol. Down / Previous Track Button
Volume Control: Press once/multiple times – Volume decreases
by 0.5db for each press.
Beep Sound - when you reach min. vol.
Playback Control: Press and Hold – Skip to the previous song
CAUTION: Please do not keep higher volume for a long time in
order to avoid any possible damage to your ears. For your safety,
do not use this product while driving or cycling. It may cause
hazard due to sound insulation.
Voice calls
Accept Incoming Calls: Press MF button once
Reject Incoming Calls: Press and Hold MF button
End Active Calls: Press MF buttton once
Virtual Assistants
Double click the MF button to activate Siri / Google Assistant /
Cortana on your smart device.
Vol. Up /
Next Track
Button
Volume Up: Press once / multiple times
Next track: Press & Hold
Vol. Down /
Previous Track
Button
Volume Down: Press once / multiple times
Previous track: Press & Hold
MF
Button
Power On/Off: Press & Hold for about 2secs
Play/Pause/Ans & End phone calls: Press Once
Reject a phone call: Press & Hold
Activate Siri/Google Assistant/Cortana:
Double Click
Force to enter Pairing Mode: Press & Hold for
about 5secs
Playing Music
The following instructions explain the functionality of the buttons
on amplify for controlling your music playback.
1. Vol. Up / Next Track Button
Volume Control: Press once/multiple times – Volume increases
by 0.5db for each press.
Notification Sound - when you reach max.vol.
Playback Control: Press and Hold – Skip to the next song
BUTTON CONTROLS
Adjusting the Volume
When a smartphone is paired with amplify, the phone's volume
can be adjusted independently from amplify’s own volume
control, giving you two sets of volume controls for even finer
adjustments to your music.
Notification Sounds
There will be notification sounds under the following status:
Power On, Power Off, Pair, Connect, Pairing disconnected,
Max. volume and Low battery warning.
Reconnection
Previously paired devices will reconnect to amplify automatically
once turned back on. When amplify is not paired or loses its
connection with any other device via Bluetooth, it will power off
automatically after 10 minutes.
Factory Reset
With amplify powered On, press & hold the Vol. ‘+’ and Vol.‘−’
butttons simultaneously for approximately 6-8 seconds. Release
the buttons when the LED light flashes ORANGE. The unit has
entered pairing mode and any previously paired devices will be
cleared from its memory.
OTHER FUNCTIONS