Version 1.1 Nov.
TMC7200 7" Integrated Handy POS with Intel® Atom® Z8550 Quad Core™ CPU Copyright 2020 All Right Reserved Manual Version 1.1 TRADEMARK All trademarks and registered trademarks mentioned herein are the property of their respective owners. You may not reproduce or transmit in any form or by any means, electronic, or mechanical, including photocopying and recording. DISCLAIMER This user’s manual is meant to assist users in installing and setting up the system.
FCC NOTICE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
Contents 1 Introduction ......................................................................................... 1-1 1.1 2 3 4 About This Manual ..................................................................... 1-2 Getting Started .................................................................................... 2-2 2.1 Package List ............................................................................... 2-2 2.2 System Overview .........................................................
4.4 Advanced ................................................................................. 4-11 4.4.1 Advanced – Security Configuration .................................. 4-12 4.4.2 Advanced – Chipset Configuration ................................... 4-14 4.4.3 Advanced – USB Configuration ........................................ 4-15 4.5 Security .................................................................................... 4-16 4.6 Boot ................................................
Revision History The revision history of TMC7200 User Manual is described below: Version No. Revision History 1.0 Initial Release 1.
1 Introduction This chapter provides the introduction for the TMC7200 system as well as the framework of the user manual.
Chapter 1 Introduction 1.1 About This Manual Thank you for purchasing our TMC7200 system. The TMC7200 provides faster processing speed, greater expandability and can handle more tasks than before. This manual is designed to assist you how to install and set up the whole system. It contains 4 chapters. Users can configure the system according to their own needs. This user manual is intended for service personnel with strong hardware background. It is not intended for general users.
2 Getting Started This chapter provides the information for the TMC7200 system.
Chapter 2 Getting Started 2.1 Package List If you discover any of the items listed below are damaged or lost, please contact your local distributor immediately.
Chapter 2 Getting Started 2.
Chapter 2 Getting Started Tablet+ Rotatable Hand Strap+ MSR module TMC7200 SERIES USER MANUAL Page: 2-4
Chapter 2 Getting Started TMC7200 SERIES USER MANUAL Page: 2-5
Chapter 2 Getting Started TMC7200 SERIES USER MANUAL Page: 2-6
Chapter 2 Getting Started TMC7200 SERIES USER MANUAL Page: 2-7
Chapter 2 Getting Started MSR module installation Rotatable Hand Strap installation TMC7200 SERIES USER MANUAL Page: 2-8
Chapter 2 Getting Started TMC7200 SERIES USER MANUAL Page: 2-9
Chapter 2 Getting Started In addition, if this function is enable you have 2 additional functions : (1) Sleep indicator mode (enable by default) When screen off, keep pressing during 3 seconds enabled L/R-buttons to : (i) activate sleep indicator mode (Tablet LED indicator will blink 3 times in green-yellow-green colors). (ii) disable Sleep Indicator mode (Tablet LED indicator will blink 2 times in green color).
Chapter 2 Getting Started when you press the power button). To unlock the shipping mode, you have just to put on plugged charger => Tablet LED indicator will bright in Red during 8 seconds (Battery checking). And after that you can start tablet normally. The shipping mode will be useful when you have to store the tablet during long period after each use, it saves battery.
Chapter 2 Getting Started 2.3 Specifications 2.3.1 Tablet Tablet System(TMC7200-7400) ® CPU Supports Memory Storage OS support Power Requirement Vibrator Light sensor G-Sensor WiFi+BT Battery Capacity (Non replaceable) Battery Operation Battery Charging time Function Key-L&-R Weight Dimension Drop test Certification ® TM Intel Atom x5-Z8550 Quad Core 1.44GHz up to 2.4GHz LPDDR3 4GB on board eMMC 64GB on board Windows 10 IoT Ent 2019 LTSC (64 bits) DC 12V/2A by by Pogo Pin Yes Yes Yes Wi-Fi 802.
Chapter 2 Getting Started SD Micro SD up to 128GB Environment Operating Temp. Storage Temp. Operating Humidity 0°C~ 35°C (32°F ~ 95°F) -20°C~ 60°C (-4°F~ 140°F) 10%~ 90% 2.3.2 Charging dock Charging dock System(TMC7000-Charger) Kensington lock Power supply Adapter Weight Dimension One slot Input: 100~240V, 50/60 Hz; Output:12V/2A 362g 100x 56x 108mm(Wx Hx D) 2.3.
Chapter 2 Getting Started Safety Precautions Before operating this system, read the following information carefully to protect your systems from damages, and extend the life cycle of the system. 1. Check the Line Voltage • The operating voltage for the power supply should be within the range of 100V to 240V AC; otherwise the system may be damaged. 2. Environmental Conditions • Place your TMC7200 on a sturdy, level surface. Be sure to allow enough space around the system to have easy access needs.
3 Software Utilities This chapter provides the detailed information that guides users to install driver utilities for the system.
Chapter 3 Software Utilities 3.1 Introduction TMC7200 Driver Utilities have been stored in the Integrated Pad system: File Path: C:\TMC7200_v1.0 Purpose C:\TMC7200_v1.0\DRIVER\ Platform\1_Main Chip \Win10-64Bit C:\TMC7200_v1.0\DRIVER\ Platform\2_Audio\ Win10-64Bit C:\TMC7200_v1.0\DRIVER\ Device\3_G-sensor\ Win10-64Bit C:\TMC7200_v1.0\DRIVER\ Platform\4_WIFI&BlueTooth\ Win10-64Bit Win10 64bit OS Intel® Chipset Device Software installer (Audio & BM&Camera & DPTF & GFX & GPIO & GPIO & I2C & MBI & PMIC & Sen
Chapter 3 Software Utilities 3.2 ® Installing Intel Chipset Software Installation Utility Introduction The Intel® Chipset Software Installation Utility installs the Windows *.INF files to the target system.
Chapter 3 Software Utilities After the Chipset driver is installed, the following driver utilities will also be installed at the same time: • Audio driver utility • BM driver utility • Camera driver utility • DPTF driver utility • GFX driver utility • GPIO driver utility • GPIOVirtual driver utility • I2C driver utility • MBI driver utility • PMIC driver utility • Sensor driver utility • TXEI driver utility • UART driver utility • WCE driver utility For more details on the installation procedure, refer to
Chapter 3 Software Utilities 3.3 Installing Audio Realtek Software Installation Utility After the default Audio driver utility has been installed in the procedure above, it will not function until you have installed Realtek ALC5640-VB-CG driver utilities. Please follow the steps below: 1 Enter the C:\TMC7200_v1.0 > DRIVER > Platform > 2_Audio > Win10-64Bit > RTK_6_2_9600_4239_WHQL > x86 folder where the Audio Realtek ALC5640-VB-CG driver is located, and rtii2sac.inf file will be installed automatically.
Chapter 3 Software Utilities TMC7200 SERIES USER MANUAL Page: 3-6
Chapter 3 Software Utilities 3 From Realtek I2S Audio Codec Properties window, click Update Driver… from the Driver tab to start updating the audio driver software for TMC7200. 4 Click Browse my computer for driver software item.
Chapter 3 Software Utilities 5 Click Let me pick from a list of device drivers on my computer. 6 Click Have Disk….
Chapter 3 Software Utilities 7 Click Browse... button to browse for the file directory where the Realtek I2S Audio Codec installation driver is located. 8 Select C:\TMC7200_v1.0 > DRIVER > Platform > 2_Audio > Win10-64Bit > RTK_6_2_9600_4239_WHQL> x86, select rtii2sac.inf file and click Open to open the file.
Chapter 3 Software Utilities 9 Click OK. 10 Click Next to continue the installation.
Chapter 3 Software Utilities 11 Windows has finished installing Realtek I2S Audio Codec driver software. Click Close to complete. 12 Go to Realtek I2S Audio Codec Properties window and select Driver tab, and you will see the Realtek audio driver utility has been updated. Click Close to exit.
Chapter 3 Software Utilities 13 Once the installation is completed, restart TMC7200 for the changes to take effects, and the audio function can start to work normally.
Chapter 3 Software Utilities 3.4 Installing G-Sensor Software Installation Utility The G-Sensor driver utility provided allows users to turn the touch screen horizontally or vertically. Please follow the steps below to install G-Sensor driver utilities: 1 Enter the C:\TMC7200_v1.0 >DRIVER > Platform > 2 3 4 3_G-sensor > Win10-64Bit > 1_4.22.0063_signed(STEP-1) folder. Click setup.exe file for driver installation. Follow the on-screen instructions to install the driver. Enter the C:\TMC7200_v1.
Chapter 3 Software Utilities TMC7200 SERIES USER MANUAL Page: 3-14
Chapter 3 Software Utilities 6 From STMicroelectronics 3-Axis Digital Accelerometer Properties window, click Update Driver… from the Driver tab to start install the G-sensor driver software for TMC7200. 7 Click Browse my computer for driver software item.
Chapter 3 Software Utilities 8 Click Let me pick from a list of device drivers on my computer. 9 Click Have Disk… button.
Chapter 3 Software Utilities 10 Click Browse… button to browse for the file directory where the G-sensor installation driver is located. 11 Select C:\TMC7200_v1.0 > DRIVER > Device > G-sensor > Win10-64Bit >2_Accel_SPB_SensorAPI_2.8.1.10(STEP-2) > x86 folder from the Look in drop-down box, and select ST_Accel.inf file. Click Open to open the file.
Chapter 3 Software Utilities TMC7200 SERIES USER MANUAL Page: 3-18
Chapter 3 Software Utilities 12 Click OK. 13 Click Next to continue the installation.
Chapter 3 Software Utilities 14 Windows has finished installing G-sensor driver software. Click Close to complete.
Chapter 3 Software Utilities 15 Go to STMicroelectronics 3-Axis Digital Accelerometer Properties window and select Driver tab, and you will see the STMicroelectronics G-sensor driver utility has been updated. Click Close to exit. 16 Once the installation is completed, restart TMC7200 for the changes to take effects.
Chapter 3 Software Utilities 3.5 Installing WiFi and Bluetooth Software Installation Utility 4.5.1 Installing Wi-Fi Software Installation Utility Please follow the steps below to install Bluetooth driver utilities: 1 Enter the C:\TMC7200_v1.0 > DRIVER > Platform > 4_Bluetooth > Win10-64Bit > AP6356SDPR\WiFi\x64\ DHD_1.558.53.33_Win10_x64_HLK_driveronly folder.. 2 Click the file "bcmwdidhdpcie.inf" and then right-click the mouse and select “install” from the drop-down list.
4 BIOS SETUP This chapter guides users how to configure the basic system configurations via the BIOS Setup Utilities. The information of the system configuration is saved in BIOS NVRAM so that the Setup information is retained when the system is powered off.
Chapter 4 BIOS Setup 4.1 Introduction The board TMC7200 < CherryTrail > uses an Insyde BIOS that is stored in the Serial Peripheral Interface Flash Memory (SPI Flash) and can be updated. The SPI Flash contains the BIOS Setup program, Power-on Power Self-Test (POST), the PCI auto-configuration configuration utility, LAN EEPROM information, and Plug and Play support.
Chapter 4 BIOS Setup The BIOS setup menu allows users to view and modify the BIOS settings for the computer. After the system is powered on, users can access the BIOS setup menu by pressing or immediately while the POST message is running before the operating system is loading. All the menu settings are described in details in this chapter. 4.
Chapter 4 BIOS Setup Figure 4-3. Front Page Screen Press (the one that shares the decimal point at the bottom of the number keypad) to select SCU icon to access the Setup program.
Chapter 4 BIOS Setup BIOS Setup Menu Initialization Screen You may move the cursor by <↑> and <↓> keys to highlight the individual menu items. As you highlight each item, a brief description of the highlighted selection will appear at the bottom of the screen. The language of the BIOS setup menu interface and help messages are shown in US English. You may use <↑> or <↓> key to select among the items and press to confirm and enter the sub-menu.
Chapter 4 BIOS Setup BIOS Setup Navigation Key Description Close the sub-menu. Trigger the confirmation to exit BIOS setup menu.
Chapter 4 BIOS Setup 4.3 Main Menu Path Main The Main menu allows you to view the BIOS Information, change the system date and time, and view the user access privilege level. Use tab to switch between date elements. Use <↑> or <↓> arrow keys to highlight the item and enter the value you want in each item. This screen also displays the BIOS version (project) and BIOS Build Date and Time.
Chapter 4 BIOS Setup BIOS Setting MCU Version Serial Number Percentage of Battery level System Memory Speed Cache RAM Total Memory Options No changeable options No changeable options No changeable options No changeable options No changeable options No changeable options Description/Purpose Displays the MCU version. Displays the Serial Number of motherboard Displays battery level. Displays Memory Speed. Displays Cache RAM size. Displays Total memory size.
Chapter 4 BIOS Setup BIOS Setting Options SODIMM 1 No changeable options CHV SOC No changeable options MRC Version No changeable options PUNIT FW No changeable options PMC FW Patch No changeable options TXE FW Version GOP No changeable options No changeable options Microcode Revision No changeable options CPU Flavor No changeable options TMC7200 SERIES USER MANUAL Description/Purpose Displays the DODIMM 1 size. Displays the CPU's stepping information. Displays the MRC Version.
Chapter 4 BIOS Setup Main Screen BIOS Setting Board ID Fab ID Language System Time System Date About this Software Options Description/Purpose Displays the Board ID of the No changeable options SoC. No changeable options Displays the Fab ID. - English - Francais Select the current default language used by the BIOS. - hour - minute - Second Specifies the current time. - month - day - year Specifies the current date. Displays this Software No changeable options information.
Chapter 4 BIOS Setup 4.4 Advanced Menu Path Advanced This menu provides advanced configurations for setting Security Configuration and Chipset Configuration. Advanced Menu Screen BIOS Setting Security Configuration Chipset Configuration Options Description/Purpose Sub-Menu Security Configuration. Sub-Menu Advanced Chipset Configuration Options.
Chapter 4 BIOS Setup 4.4.
Chapter 4 BIOS Setup BIOS Setting Options Description/Purpose TXE Configuration TXE FW version No changeable options TXE FW Version TXE FW Capabilities No changeable options TXE FW Capabilities TXE FW Features No changeable options TXE FW Features TXE FW OEM Tag No changeable options TXE FW OEM Tag TXE Firmware Mode No changeable options TXE Firmware Mode Platform Trust Technology Measured Boot - Enabled - Disabled Measured Boot Target TPM device - fTPM - dTPM Target TPM device TMC72
Chapter 4 BIOS Setup 4.4.2 Advanced – Chipset Configuration Menu Path Advanced > Chipset Configuration Security Configuration Screen BIOS Setting Options Description/Purpose Chipset Configuration NFC Switch Camera Switch Light-Sensor Switch USB Configuration - Enabled - Disabled - Enabled - Disabled - Enabled - Disabled Sub-Menu TMC7200 SERIES USER MANUAL To control the NFC function on the O.S. To control camera function on the O.S. To control the Light-Sensor function on the O.S.
Chapter 4 BIOS Setup 4.4.3 Advanced – USB Configuration Menu Path Advanced > USB Configuration Security Configuration Screen BIOS Setting USB Per-Post Control USB Port #0 USB Port #1 USB Port #2 USB Port #3 USB Port #4 Options - Enabled - Disabled - Enabled - Disabled - Enabled - Disabled - Enabled - Disabled - Enabled - Disabled - Enabled - Disabled TMC7200 SERIES USER MANUAL Description/Purpose Control each of the USB ports (0 ~ 9) disabling. Disable USB port #0. Disable USB port #1.
Chapter 4 BIOS Setup 4.5 Security Menu Path Security From the Security menu, you are allowed to create, change or clear the supervisor password. You will be asked to enter the configured supervisor password before you can access the Setup Utility. By setting a supervisor password, you will prevent other users from changing your BIOS settings. You can configure a supervisor password and then configure a user password.
Chapter 4 BIOS Setup BIOS Setting Options TPM Operation -No Operation -Disable -Enable Clear TPM -Disabled -Enabled Supervisor Password No changeable options User Password No changeable options Description/Purpose Enable: Enable Storage and Endorsement Hierarchy Disable: Disable Storage and Endorsement Hierarchy Clear TPM. Removes all TPM conttect associated with a specific Owner. Displays the Supervisor Password state. Displays the User Password state.
Chapter 4 BIOS Setup 4.6 Boot Menu Path Boot This menu provides control items for system boot configuration such as setting setup prompt timeout, enabling/disabling quick boot, quiet boot, Network Stack and PXE Boot capability, configuring ACPI (Advanced Configuration and Power Management Interface) settings and USB boot.
Chapter 4 BIOS Setup BIOS Setting ACPI Selection USB Boot Timeout Options - Acpi 1.0B - Acpi 3.0 - Acpi 4.0 - Acpi 5.0 - Enabled - Disabled - second TMC7200 SERIES USER MANUAL Description/Purpose Select booting to ACPI Disabled or Enabled booting to USB boot devices. The number of seconds that the firmware will wait before booting the original default boot selection.
Chapter 4 BIOS Setup 4.7 Save & Exit Menu Path Exit The Exit allows users to save or discard changed BIOS settings as well as load the optimized defaults for BIOS settings. Exit Screen BIOS Setting Options Description/Purpose Exits and saves the changes in NVRAM. Save your changes and without exiting system. Exits without saving any changes made in BIOS settings. Loads the optimized defaults for BIOS settings.