Specification
1-800-959-3343 / 317-842-2600
9955 Westpoint Drive, Suite 101, Indianapolis IN USA 46256
1074-913.Adhesives Spec Sheet (11/07/2016 - 5:04 PM)
Adhesives
EZ-STICK PRO
™
TABS:
• Permanent Bond
• Clean and Quick Installation
• Ceiling* and Wall Installations
• Easy Peal and Stick Application
• No Additional Application Tools Required
Auralex
®
Acoustics offers a variety of permanent and
temporary adhesive options to mount your acoustical
absorption and diffusion treatments.
Compatible Auralex Products:
Studiofoam
®
/
Studiofoam Pro
Studiofoam
Bass Traps
GeoFusor
™
/
QuadFusor
™
/
T’Fusor
™
SonoLite
™
/
SonoLite Bass Traps
SonoFiber
™
SoniCell
™
EZ-Stick Pro X X X X X
Foamtak X X X X
Tubetak Pro X X X X X
Temp•Tabs X X X X
Application Information:
Wall Application Ceiling Application* Permanent Temporary Cure Time Add’l Tools Needed
EZ-Stick Pro X X X < 5 Minutes
Foamtak X X X < 1 Minute
Tubetak Pro X X X 12-24 Hours X
Temp•Tabs X X < 5 Minutes
TEMP•TABS
™
:
• Temporary Application
• Instant Bond
• Minimal Wall Damage Upon Removal
• No Additional Application Tools Required
TUBETAK PRO
™
:
• Strong Permanent Bond
• Ceiling* and Wall Installations
• Low VOC Content
• Calk Gun and Putty Knife Required
FOAMTAK
™
:
• Spray Application
• Fast Permanent Bond
• Ceiling* and Wall Installations
• No Additional Application Tools Required
* Adhesive may not be suitable for all ceiling applications depending on acoustical product, mounting surface and environmental conditions.
** EZ-Stick Pro, Foamtak and Tubetak Pro are considered permanent adhesives. Removal will require mechanical methods (sanding or scraping) which will damage the product and most wall surfaces.
All copyrightable materials are ©Copyright Auralex Acoustics, Inc. 1994-2017. Auralex, Total Sound Control, Studiofoam and Real-World Acoustics are registered trademarks, and GeoFusor, T’Fusor, QuadFusor,
SonoLite, SonoFiber, SoniCell, EZ-Stick Pro, Foamtak, Tubetak Pro, and Temp Tabs are trademarks, of Auralex Acoustics, Inc. All rights reserved. Proudly designed and manufactured in the U.S.A.