User Manual

Roominator Designer Series
™
USER GUIDE
Auralex
®
Acoustics, Inc.
1-800-959-3343 / 317-842-2600 / Auralex.com
9955 Westpoint Drive, Suite 101, Indianapolis IN USA 46256
EACH KIT INCLUDES:
INSTALLATION:
D36
™
(18) 1' x 1' x 2" DST-112 Studiofoam
®
Panels
(18) 1' x 1' x 2" DST-114 Studiofoam
®
Panels
(72) EZ-StickPro
™
Tabs
Alpha-DST
™
(32) 1' x 1' x 2" DST-112 Studiofoam
®
Panels
(32) 1' x 1' x 2" DST-114 Studiofoam
®
Panels
(4) DST-LENRD
®
Bass Traps
(144) EZ-Stick Pro
™
Tabs
D108L
™
(54) 1' x 1' x 2" DST-112 Studiofoam
®
Panels
(54) 1' x 1' x 2" DST-114 Studiofoam
®
Panels
(8) DST-LENRD
®
Bass Traps
(248) EZ-Stick Pro
™
Tabs
DST-112
DST-114
DST-LENRD
®
BASS TRAP
EZ-STICK PRO
™
DST Panels and LENRD Bass Traps can be mounted to standard drywall with the included EZ-Stick Pro Tabs. Be advised that the EZ-Stick
Pro Tabs are designed for permanent installations and will damage drywall and painted surfaces when removed.
DST-112 and DST-114 panels use 2 EZ-Stick Pro Tabs each. DST-LENRDs uses 4 EZ-Stick Pro Tabs each.
Mark the target position on your wall or ceiling where the product will be mounted using small pencil marks, pieces of masking tape or any
similar method. Be sure the surface where the EZ-Stick Pro Tabs will adhere is free of dirt, dust or other oily contaminants by spot cleaning
with rubbing alcohol.
Remove one of the release layers on the EZ-Stick Pro Tabs and affix it to the rear side of the products perimeter, usually near the corners.
Apply firm pressure and wait about 5 minutes for the adhesive to set. Remove the second layer of the release paper from each of the EZ-Stick
Pro Tabs, carefully orient the panels position prior to contact with the wall, then press in place with moderate pressure.
991-413.Roominator Designer Series User Guide.indd (10/17/2013 - 2:38 PM)