User's Manual

AUKEY EP-M1 Pro
USER MANUAL
Ear-tips
Charging Case
Earbuds
In the Box
- 01 -
- 07 - - 08 - - 09 - - 10 - - 11 - - 12 -
- 02 - - 03 - - 04 - - 05 - - 06 -
User Manual
USB-C
Charging Cable
Thank you for purchasing the AUKEY EP-M1 Pro True Wireless Stereo
earbuds. Please read this user manual carefully and keep it for future
reference. If you need any assistance, please contact our support team
with your product model number and Amazon order number.
Specifications
Product Number
Bluetooth Version
Charging Time
Battery Life
Earphones Impedance
Maximum Output Power
Frequency Range
Microphone Sensitivity
Battery Capacity
Bluetooth Effective Distance
Product Weight
Charging Voltage
EP-M1 Pro
5.0
≈2h
≈30h (with case)
≈5h (buds only)
32Ω
5mW
20Hz-20KHz
-42dB@1KHz
500mAh
10m
35g
DC 5V
A2DP / AVRCP/HSP/ HFP Bluetooth Protocol
PRODUCT DETAILS
Please charge the earbuds and the charging case for at least 15 minutes
before first use.
LED Indicator
Multi-Function Touch Panel
LED Charging Indicator
USB-C Charging Port
LISTENING COMFORT
Select the right size of ear-tip
Choose the ear-tip with the
most comfortable fit and best
seal. To change an ear-tip,
gently pull it off from the earbud
and press on the new one.
Wearing the Earbuds
Gently insert the earbuds into
the ear and adjust to a
comfortable position by
rotating them. R is for the right
ear, and L for the left.
BATTERY LIFE AND CHARGING
Battery life
In Bluetooth mode the buds can last for 5 hours of continuous play.
Using the charging case, this can be extended to 30 hours.
Charging the earbuds
Place the earbuds in the charging case then close the charging case,they
will automatically shut down and begin charging.
Charging the charging case
PLAYBACK CONTROLS
Touch Control
Music Play/Pause
Next Track
ANC ON /OFF
Answer
Hang Up
Decline Call
Activate Voice Assistant
Left ear
Right ear
Tap Tap
Double-tap Double-tap
Tap Tap
Long-press 2s
Long-press 2s Long-press 2s
Long-press 2s
Long-press 2s Long-press 2s
Triple-tap Triple-tap
Model: EP-M1 Pro
AUKEYTechnologyCo.,Ltd.
www.aukey.com | [e-mail]
Room 102, Building P09, South China City Electronic trading
center, Longgang District, Shenzhen, Guangdong, P.R.China
FCC ID: 2ATIH-EPM1PRO
Designed by AUKEY
AUTOMATIC CONNECTION
Automatic remote connection
1. When you turn on the earbuds, they will automatically reconnect to the
last-paired device or enter pairing mode if no paired device is found.
2. Forced pairing, 5 tap on either side of the touch button, disconnect the
current Bluetooth connection, re-enter the pairing mode, the blue light
quickly flashes.
3.In pairing mode, the earbuds will automatically turn off after 5 minutes
if no devices are paired.
4. Place the earbuds in the charging case then close the charging
case,they will automatically shut down and begin charging.
5. If the Bluetooth connection is lost, they will automatically begin
pairing.
2. Use electronic equipment with caution during thunderstorms.
3. This product contains small parts which could cause harm if swallowed.
Keep out of the reach of children.
4. Using the earbuds for a long time at high volume may affect your
hearing. Make sure to use an appropriate level of volume.
Pairing:
1. Turn on the Bluetooth of your mobile phone
2. Open the charging case, they will automatically turn on and enter the
pairing state.
3. Turn on the pairing function on the device to be paired with the earbuds
4. From the list of available devices Find and select "AUKEY RP-M1 Pro"
from the list of available devices.
5. If a code or PIN code is required for pairing, please enter "0000"
NOTE:
● If one of the earbuds has no sound output, put both earbuds back into
the charging case and take them out again.
● The maximum wireless operating range is 10m (33ft). If you exceed
this range, the earbuds will disconnect from your paired device. The
connection will be re-established if you re-enter the wireless range within
5 minutes. The earbuds will automatically reconnect to the last-paired
device. To connect with other devices, repeat the previous pairing steps.
SAFETY INSTRUCTIONS
1. Do not place the earbuds in extremely high or low ambient temperatures
for an extended period of time. Extreme temperatures will cause the device
to deform.
BATTERY WARNING
This product contains a lithium battery. Please do not disassemble, strike,
crush, or place the product into contact with flames. Do not expose to
high temperatures or direct sunlight for a prolonged period. If there is any
swelling, leakage, odor, or any other abnormality in the battery
compartment of the product, cease use immediately. Please dispose of
used batteries properly and in accordance with local regulations.
READ ALL INSTRUCTIONS BEFORE USE AND SAVE
THESE INSTRUCTIONS FOR FUTURE REFERENCE
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
ISEDC RF EXPOSURE STATEMENT:
The device is compliance with RF exposure guidelines, users can obtain
Canadian information on RF exposure and compliance.
LE PRÉSENT APPAREIL EST CONFORME
Après examen de ce matériel aux conformité ou aux limites d’intensité de
champ RF, les utilisateurs peuvent sur l’exposition aux radiofréquences
et la conformité and compliance d’acquérir. les informations correspon-
dantes.
FCC RF EXPOSURE STATEMENT:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
CAUTION!
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
ISEDC STATEMENT
This device complies with Innovation, Science, and Economic Development
Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that
may cause undesired operation of the device.Le présent appareil est
conforme aux CNR d’ Innovation,
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de classe b est conforme à la norme nmb - 003
du canada.
Sciences et Développement économique Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes : (1) l’appareil nedoit pas produire de brouillage, et (2) l’utilisateur
de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
80*80mm,80g