Installation Manual

ManualsBrandsAugust Home ManualsElectronicsAugust Wi-Fi Smart Lock

Installation Manual

Prepare your existing deadbolt

Place the supplied adhesive strip to hold the keyed side of the lock in place. Be sure to press

down the tape against the keyhole when you install the smart lock on the inside of the door.

Remove your existing thumbturn

To remove your existing thumbturn, position your thumbturn to expose both screws, and remove

the screws entirely. Be sure to unlock your deadbolt before removing the thumbturn entirely.

If your deadbolt has a back plate, remove that as well.

Prepare the Mounting Plate

The included Mounting Plate has two adjustable screw-holes that can be repositioned as

needed. Use the two screws from the thumbturn, and insert it through the screw-holes.

Determine if you need the Cover Plate

For oversized deadbolt holes, an optional cover plate is included with your smart lock. If your

smart lock’s mounting plate does not fully cover the hole left by the removed thumbturn, you

may want to use the included Cover Plate.

Attach the Mounting Plate

If using the optional Cover Plate, place it over the deadbolt hole. Take note of the DOOR SIDE

and UP arrow. Pass the mounting plate screws through the larger opening in the Cover Plate,

taking note of the UP arrow.

Tighten the screws until the mounting plate is settled securely against the door.

Summary of content (6 pages)

PAGE 1
Installation Manual Prepare your existing deadbolt Place the supplied adhesive strip to hold the keyed side of the lock in place. Be sure to press down the tape against the keyhole when you install the smart lock on the inside of the door. Remove your existing thumbturn To remove your existing thumbturn, position your thumbturn to expose both screws, and remove the screws entirely. Be sure to unlock your deadbolt before removing the thumbturn entirely.
PAGE 2
PAGE 3
Choose your adapter Select your adapter from the Compatibility Chart above. If your lock brand is not in the chart, slide each adapter onto the tailpiece to find the right one. The correct adapter will have one of the teeth pointing up. Attach the correct adapter Place the correct adapter onto the tail piece. One of the triangle shaped teeth should be facing up if you have the correct adapter. Make sure the non teeth side of the adapter goes in through the tail piece first.
PAGE 4
Reattach the faceplate Place the faceplate back onto the smart lock, with the August logo at the bottom Install August App Download the App from august.com/app The app will help you create an account and set up your August Smart Lock. We suggest that you protect your phone with a passcode in case it is lost or stolen.
PAGE 5
FCC regulations FCC caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 6
Cet appareil est conforme aux flux RSS exemptés de licence d'Innovation, Science et Développement économique Canada. L'opération est soumise aux deux conditions suivantes: 1. Cet appareil ne doit pas provoquer d'interférence; et 2. Cet appareil doit accepter toute interférence, y compris les interférences susceptibles de provoquer un fonctionnement indésirable de l'appareil. RF Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.