Assembly

components

hardware

item description qty

A Seat 1

B Back 1

C Legs 4

Please note: actual product may

look dierent than illustration.

(H1) x 3

1 1/4" ﬂat washer

larger

limited warranty

(H2) x 3

5/16" nut

Please note: you will need a wrench to complete this assembly.

(H3) x 8

2" bolt

(H4) x 8

1 1/4" ﬂat washer

smaller

(H5) x 8

spring washer

(H6) x 1

L wrench

chair Assembly

We guarantee our upholstered furniture against defects in construction for a period of one (1) year. When a structural defect is brought to

our attention, we will repair or replace it at our option at no charge to the customer (inculdes parts and labor, not transportation costs).

Fabric wearability for upholstered furniture is not covered by the warranty. Vacuum for regular cleaning.

PLEASE DISPOSE OF PLASTIC BAG(S) AND CARTON(S) RESPONSIBLY.

PAGE 1
c h a i r A sse mb l y components B item description qty A Seat 1 B Back 1 C Legs 4 Please note: actual product may look different than illustration. C A hardware (H1) x 3 1 1/4" flat washer larger (H2) x 3 5/16" nut (H3) x 8 2" bolt (H4) x 8 1 1/4" flat washer smaller (H5) x 8 spring washer (H6) x 1 L wrench Please note: you will need a wrench to complete this assembly.
PAGE 2
c h air Asse mb ly step 1 1.1 Insert (C) legs into holes on the bottom of (B) back, making sure (C) legs are flush against the bottom of (B) back. Attach using (H3) bolts and (H4, H5) washers. Tighten with (H6) L wrench. step 2 2.1 Fit (A) seat onto bolts of (B) back, aligning sides and bottoms of both pieces. 1.2 Attach (A) seat to (B) back using (H1) washers and (H2) nuts. Tighten with wrench.
PAGE 3
c h a ir A sse m b l y step 3 3.1 Insert (C) legs into holes on the bottom of (A) seat, making sure (C) legs are flush against the bottom of (A) seat. Attach using (H3) bolts and (H4, H5) washers. Tighten with (H6) L wrench.