Assembly Instructions

ManualsBrandsAugust Grove Manuals3 Piece Kitchen & Dining Room SetsStrope 3 Piece Dining Set

3PC COUNTER HEIGHT TABLE SET

This page lists all the contents included in the box. Please take the time to identify

the hardware as well as the individual components to this product. As you unpack

and prepare for assembly, place the contents on a carpeted or padded area to

protect them from damage.

c l e a n i n g & c a r e

Treat surface with care. Clean surfaces with a dry or

damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time.

Periodically check that all connections are tight.

ASSEMBLY INSTRUCTIONS

Summary of content (8 pages)

PAGE 1
ASSEMBLY INSTRUCTIONS 3PC COUNTER HEIGHT TABLE SET This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. c l e a n i n g & c a r e Treat surface with care. Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time.
PAGE 2
TABLE PARTS & HARDWARE LIST A. TABLE TOP B. TABLE LEG (LEFT FRONT / RIGHT BACK) C. TABLE LEG (RIGHT FRONT / LEFT BACK) QTY: 1 PC QTY: 2 PCS QTY: 2 PCS D. BOTTOM PANEL E. TOP PANEL F. SIDE PANEL QTY: 1 PC QTY: 2 PCS G. MIDDLE PANEL QTY: 1 PC H. DIVIDER PANEL QTY: 1 PC QTY: 2 PCS 1. BOLT 5/16" Dia x 2-1/2"L 2. SPRING WASHER QTY: 1 PC 3. FLAT WASHER QTY: 8 PCS 4. BOLT 1/4" Dia x 2"L QTY: 8 PCS QTY: 8 PCS 5. CAM LOCK 6. METAL DOWEL SCREW QTY: 4 PCS QTY: 4 PCS 7. "T" NUT 8.
PAGE 3
CHAIR PARTS & HARDWARE LIST J. CHAIR BACK FRAME K. SEAT BOARD L. SEAT FRAME QTY: 2 PCS QTY: 2 PCS QTY: 2 PCS M. CHAIR FRONT LEFT LEG N. CHAIR FRONT RIGHT LEG O. FRONT CROSSBAR QTY: 2 PCS P. SIDE CROSSBAR QTY: 4 PCS 3. FLAT WASHER QTY: 22 PCS QTY: 2 PCS 10. LONG BOLT 1/4" Dia x 3"L QTY: 8 PCS 11. SHORT BOLT 1/4" Dia x 1-3/4"L QTY: 6 PCS 13. WOOD SCREW 14. OPEN END WRENCH QTY: 24 PCS QTY: 1 PC QTY: 2 PCS 2. SPRING WASHER QTY: 22 PCS 12.
PAGE 4
TABLE ASSEMBLY INSTRUCTIONS REQUIRED HARDWARE IN THIS STEP NO. DESCRIPTION 5 CAM LOCK 6 SKETCH QTY 4 4 METAL DOWEL SCREW 6 6 E F 6 F G F F 6 5 Diagram #1 5 5 5 E Diagram #2 Diagram #3 REQUIRED HARDWARE IN THIS STEP NO. DESCRIPTION 4 BOLT G H SKETCH QTY 4 7 NUT 4 9 ALLEN KEY 1 9 4 4 4 Diagram #5 4 D H 7 7 Diagram #4 H 7 H 7 1. Screw the 4 metal dowel screw (6) into the pre drilled plastic hole.
PAGE 5
TABLE ASSEMBLY INSTRUCTIONS REQUIRED HARDWARE IN THIS STEP REQUIRED HARDWARE IN THIS STEP NO. DESCRIPTION 8 WOOD DOWEL SKETCH NO. DESCRIPTION 1 BOLT QTY 4 8 QTY 2 SPRING WASHER 2 8 SKETCH 2 3 FLAT WASHER 2 9 ALLEN KEY 1 8 C 8 B D C Diagram #6 3 2 23 B Diagram #8 Diagram #7 B REQUIRED HARDWARE IN THIS STEP NO. DESCRIPTION 1 BOLT 2 SPRING WASHER SKETCH QTY 2 8 2 3 FLAT WASHER 8 WOOD DOWEL 4 9 ALLEN KEY 1 C 8 2 3 2 1 2 1 3 F 9 Diagram #9 5.
PAGE 6
TABLE ASSEMBLY INSTRUCTIONS REQUIRED HARDWARE IN THIS STEP Diagram #10 NO. DESCRIPTION 1 BOLT 2 SKETCH SPRING WASHER QTY 2 2 3 FLAT WASHER 2 9 ALLEN KEY 1 Diagram #11 3 2 1 9 8. turn the table base upright. Place the table top (A) on the table legs as shown. 9. secure the table top (A) to the table base using 4 bolts (1), 4 spring washers (2) and 4 flat washers (3) as shown.Tightly fasten the bolts using Allen key (9). Diagram #12 10. The table is now ready for use.
PAGE 7
CHAIR ASSEMBLY INSTRUCTIONS REQUIRED HARDWARE IN THIS STEP NO. DESCRIPTION 2 SPRING WASHER SKETCH REQUIRED HARDWARE IN THIS STEP QTY 7 NO. DESCRIPTION 13 WOOD SCREW 7 3 FLAT WASHER 10 LONG BOLT 4 11 SHORT BOLT 3 SKETCH QTY 6 10 10 J 2 3 2 3 13 11 2 3 13 13 13 13 L K J L Diagram #2 Diagram #1 M O N P REQUIRED HARDWARE IN THIS STEP NO. DESCRIPTION SPRING WASHER 2 SKETCH QTY 4 12 2 3 3 FLAT WASHER 4 L 12 HEX NUT 4 J 14 OPEN END WRENCH 1 Diagram #3 1.
PAGE 8
CHAIR ASSEMBLY INSTRUCTIONS M 13 13 13 N O 13 13 13 P REQUIRED HARDWARE IN THIS STEP NO. DESCRIPTION 13 WOOD SCREW SKETCH QTY 6 L J Diagram #4 7. Turn the chair upright. Make sure the assembled chair unit is level and square. Tightly fasten all bolts with the open-end wrench (4). 8. Secure the front and side crossbars (P) to their chair legs with 6 wood screws (13). Note: Screwing the wood screws (13) to secure the front crossbar (O) by first.