Datasheet
ADX10 FLP / ADX10 FL
OVERVIEW:
The ADX10FL P is characterized with a uniformly controlled cardioid polar
pattern, helping to isolate the area or section being miked from other
instruments or vocals on stage. With a smooth and accurate frequency
range of 50 Hz - 18 kHz, the ADX10FL P is lightweight, low prole and will
provide natural sound with exceptional transient response.
The ADX10FL P, specically for use with a ute, includes a clip that
attaches to the headstock of a ute, an 8’ cable terminating to a mini XLR-f
connector and a phantom power adapter (APS 911). Other model versions
are available as well, one of which is the ADX10 FL; for use with the Audix
RAD360 wireless system which includes a ute clip, 3’ attached cable
terminating to a mini-XLRf connector.
Manufactured to high standards and tight tolerances, the ADX10FL P
features a modular threaded capsule, machined brass body with matte
black nish, high quality shielded microphone cable and a variety of optional
accessories.
FEATURES:
Small, lightweight, low profile
Natural, accurate sound reproduction
Easy to use and set up
Field replaceable capsule
Available for wireless and wired applications
INSTALLATION INSTRUCTIONS
THE AUDIX ADX10 FL FLUTE MIC SYSTEM
With the “crown piece” detached, slide the flute
clip over the end of the “head joint” (as illustrated
above) and secure the crown to the head joint.
ADX10-FL SUPPLIED ACCESSORIES:
Flute clip (MC FLUTE)
External foam windscreen (WS10)
Carrying pouch (P1)
ADX10-FLP SUPPLIED ACCESSORIES:
Flute clip (MC FLUTE)
External foam windscreen (WS10)
Carrying pouch (P1)
Battery / Phantom power adapter with on off switch and bass roll-off.
Includes belt clip. (APS 911)
OPTIONAL ACCESSORIES:
WS10S - Snap to fit external windscreen
MC10L - Metal clip with tension fit wire loop
APS 910* - Phantom power adapter
FLUTE CONDENSER MICROPHONE
adx10 fl/adx10 flp
WS10S MC10L MC FLUTE APS 911 APS 910
ADX10 FL/FLP
APPLICATIONS:
Flute (Standard size)