User Manual

OVERVIEW:

Designed, assembled and tested by Audix in the USA, the f6 is a

dynamic instrument microphone used for stage and studio applications.

The f6, which is characterized with a hypercardioid pickup pattern for

isolation and feedback control, is equipped with a LM™ Type A (Low

Mass) diaphragm for natural, accurate sound reproduction.

The f6 is lightweight, compact and easy to position. With a wide

frequency response of 40 Hz - 16 kHz and the ability to handle sound

pressure levels of 140 dB, the f6 is an excellent choice for miking

instruments requiring extended low frequency reproduction such as kick

drum, large toms and bass cabinets.

Roadworthy construction includes a precision cast zinc alloy body, black

coat nish, laser etched model and serial number, steel mesh grill, gold

XLR connector and a tension-t heavy duty nylon mic clip.

Transformerless design, low impedance and balanced output allow for

interference-free performance even with long cable runs.

FEATURES:

Compact, lightweight

Cast zinc alloy body

LM (low mass) type A diaphragm

Studio quality sound

Excellent mid-bass punch

Handles high SPL without distortion

Roadworthy construction

3 year warranty

APPLICATIONS:

Live stage, recording

Kick drum

Floor tom

Bass cabinets

Leslie bottom

SUPPLIED ACCESSORIES:

Tension-fit heavy duty mic clip (DCLIP)

Carrying pouch (P1)

OPTIONAL ACCESSORIES:

TRIPOD- Tripod mic stand

DFLEX - All purpose percussion clamp

DVICE - Spring loaded rim mount clamp

STAND-KD - adjustable kick drum mic stand

CBL-20 - 20’ XLR-XLR mic cable

CBL-DR25 - 25’ right angle XLR-XLR mic cable

DYNAMIC KICK DRUM MICROPHONE

Dynamic Instrument

f6 on KICK D-CLIP STAND-KD TRIPOD CBL-20

PAGE 1
Dynamic Instrument f6 DYNAMIC KICK DRUM MICROPHONE OVERVIEW: Designed, assembled and tested by Audix in the USA, the f6 is a dynamic instrument microphone used for stage and studio applications. The f6, which is characterized with a hypercardioid pickup pattern for isolation and feedback control, is equipped with a LM™ Type A (Low Mass) diaphragm for natural, accurate sound reproduction. The f6 is lightweight, compact and easy to position.
PAGE 2
f6 SPECIFICATIONS: Transducer Type Frequency Response Polar Pattern Output Impedance Sensitivity Capsule Technology Off Axis Rejection Maximum SPL Power Requirements Connector Dynamic 40 Hz - 16 kHz Hypercardioid 580 ohms 0.6 mV / Pa @ 80 Hz LM Type A >23 dB ≥140 dB None 3 pin gold plated male XLR connector Positive voltage on pin 2 relative to pin 3 of output XLR connector Cast zinc alloy / Black coat 311 g / 11 ounces 121 mm / 4.