-1- DRAFT 09-07-2005
THIS PAGE LEFT BLANK INTENTIONALLY -2 -
Cautions and Warnings • Do not install the unit in a position that hinders your view through the windshield, or obstructs viewing of the dashboard indicators and displays. • Do not install the unit where it may obstruct the operation or deployment of safety devices, such as airbags, etc. • Do not allow operation of the unit to detract from safe driving practices; remember that you are responsible as the vehicle operator to adhere to all safe driving and traffic regulations.
TABLE OF CONTENTS Cautions and Warnings ....................................................................... 3 TABLE OF CONTENTS ....................................................................... 4 TABLE OF FIGURES .......................................................................... 5 Xpress SYSTEM COMPONENTS ........................................................ 6 INTRODUCTION ................................................................................ 7 OPTIONAL ACCESSORIES ...........
TABLE OF FIGURES Figure 1. Your XM7 8-Digit Alpha / Numeric ID Code ......................... 8 Figure 2. Xpress XM7 Unit .................................................................. 9 Figure 3. Xpress XM7 Unit Display Screen ....................................... 11 Figure 4. XM7 Logo Power ON Screen ............................................... 12 Figure 5. Active Channel Screen ........................................................ 12 Figure 6. Main Menu Screen ................................
Xpress SYSTEM COMPONENTS Remote Control Unit Part Number 136-4042 XM7 Receiver Model Xpress Part Number 136-4040 3 Vdc Battery for Remote, (1) CR2032 -6 -
OPTIONAL ACCESSORIES INTRODUCTION The Audiovox Xpress XM7 unit processes the XM satellite signals received by the externally mounted antenna (purchased separately for Home or Boom Box Kits). The Xpress XM7 unit recognizes and decodes the incoming XM program information and provides an audio signal to your radio or other audio output equipment.
GETTING STARTED (For tuning instructions see the Receiver Control Features section of this guide.) XM Activation To obtain the XM7 identification (ID) number, tune to channel 0 and press the Rotary/Select Knob. The alphanumeric 8-digit XM7 ID number will appear on the screen. Write the number below (Figure 1) for future reference. NOTE: No adjustments are allowed in this mode. To exit the Radio ID option, press the Rotary/Select Knob again or MENU button.
Online Activation Process Once the ID code is obtained, log on to XM7 at http://activate.xmradio.com and follow the easy instructions to activate your Xpress XM7 unit. LCD DISPLAY DISPLAY BUTTON MENU BUTTON Call-in Activation Process ROTARY / SELECT KNOB POWER / IR EYE BUTTON Call XM7 at 1-800-XM RADIO (1-800-967-2346). One of XM7’s friendly Customer Care representatives will take the necessary information and walk you through the activation process.
Controls Receiver Control Features Display Button - This button allows the user to choose one of four (4) different formats to present the Artist, Song Title and data service information on the LCD screen. Search Button - This button allows the user to search the next channel category as well as between preset channels or perform a continuous search.
Jump Button – This button allows the user to jump to the Previous Channel (i.e., switch between the current and previous channel 5). Preset/Direct Button (pre./dir.) - Each momentary press of the PRESET button allows the user to switch between (3) banks of Channel presets (10 presets each A, B, and C, plus Direct channel entry. When in any of the three preset banks, momentarily pressing any of the number buttons will recall the stored channel.
BASIC OPERATION With the Xpress XM7 unit properly installed, activated and connected to your home/vehicle audio system or bombox, proceed as follows: NOTE: If this is the first time using the Xpress XM7 unit, the screen will alternately display the preview channel screen and a number of messages, including: “Activate Your XM7 1-800XM RADIO”.
Menu Options To enter the Menu Options page, press the MENU Button on either the remote control or the main unit. The Main Menu list will appear on the screen (see Figure 6). Using the Rotary/Select Knob, highlight the option you wish to adjust turning (CW) scrolls DOWN and (CCW) will scroll UP through the various menus and lists. The current selection from the list will be highlighted on the display. When the item is highlighted, press the Rotary/Select Knob to enter the selection.
FM Frequency The following Frequency Setting adjustments are possible: NOTE:The Xpress XM7 unit has an internal wireless FM transmitter, which allows you to play the audio through any standard FM receiver, eliminating the need to hardwire connections.
Brightness + Contrast This feature allows the user to adjust the brightness and contrast of the unit’s display (see Figure 9). Upon entering either the brightness or contrast mode, a horizontal bar graph is displayed with a minus (-) sign on the left and a plus (+) on the right. Use the Rotary/Select Knob to switch between the contrast and the brightness adjustments. Once the adjustment is selected press the Rotary/Select Knob to enter the adjustment mode.
NOTE: To prevent distortion caused by overdriving the audio playback device input, it is recommended that you adjust the audio level signal to mid-range. Screen displayed when the FM Frequency is set to OFF Antenna Aiming (Home Installation) This feature allows the user to aim the antenna to optimize XM7 signal reception (see Figure 11). Upon entering the antenna aiming mode, a horizontal bar graph is displayed with a minus () sign on the left and a plus (+) on the right.
Direct Tune Search Mode Turn the Rotary/Select Knob CW or CCW to highlight choice (Direct Tune On or Direct Tune Off). When the desired setting is highlighted, press the Rotary/Select Knob or the (XM) Select Button on the remote control to confirm (see Figure 12). The direct tune function when enabled (ON), allows the user to manually tune to a station using the Rotary/Select Knob or the remote control UP and DOWN buttons.
Channel Skip/Add Memory Recall The Channel Skip/Add function provides the ability to skip over certain channels when using the Rotary/Select Knob or the UP and DOWN buttons on the Remote Control. Upon entering this mode, a channel list is displayed with the current channel in play highlighted (see Figure 14). In front of each channel is a plus sign (+) signifying that the channel is not skipped or a minus sign (-) signifying the channel is skipped).
Figure 17. Tune Select Erase All Screen Figure 16. Tune Select Screen Tune Select Erase Some To select a song or artist, press and hold the Rotary/Select Knob or the (XM) Select Button on the Remote Control to enter the Artist or Song. When the exact Artist or Song is played on the XM7 broadcast, the user will be notified.
Select By-Song Select By Artist This feature enables the Xpress XM7 unit to search stored content by song title (see Figure 19). Use the Rotary/Select Knob or the UP and DOWN buttons on the remote control and select the “Select by Song Set”. Press the Rotary/Select Knob or the (XM) Select Button on the remote to confirm the selection. This feature enables the Xpress XM7 unit to search stored content by artist title (see Figure 20).
Stock Ticker Add Stock This feature allows the user to monitor various stocks (see Figure 21). The Xpress XM7 unit can monitor up to 20 of stock symbols. Use the Rotary/Select Knob or the remote control up down buttons and select the “Add Stocks”. Press the Rotary/ Select Knob or the (XM) Select Button on the remote control to confirm the selection. Two screens will appear “Please Wait” and “Enter Symbol” (see Figure 22).
Erase Stock Erase All Stock This feature allows the user to erase Stock Tickers individually or all together (see Figure 23). To erase All Stock Tickers use the Rotary/Select Knob or the remote control up down buttons to choose the “Erase All” (see Figure 24).
Erase Stock Info Extras This feature allows the user to erase Stock Tickers individually or all together (see Figure 23). To erase All Stock Tickers use the Rotary/Select Knob or the remote control up down buttons to choose the “Erase All” (see Figure 24). To erase Some Stock Tickers use the Rotary/Select Knob or the UP and DOWN buttons on the remote control to choose the “Erase Some” (see Figure 25). Figure 25.
Display Screen Mode This feature allows the user to personalize the display of the unit to individual preferences. Upon entering Display Screen mode (see Figure 27), the user can adjust the way information is viewed. Use the Rotary/Select Knob or the remote control UP and DOWN buttons to highlight the setting you wish to adjust then press the Rotary/Select Knob or the (XM) Select button on the remote control to confirm the selection. Figure 27. Display Screen Figure 26.
Scrolling Display Background Setting The Scrolling Display feature allows the user to program the Xpress XM7 unit to scroll stock tickers and Info Extra information across the bottom portion of the screen (continuous stream of information) or in paging mode (page by page of information). The paging feature is useful when viewing the display at a distance.
Time Zone Set Clock This feature allows the user to personalize the clock display (see Figure 30). The clock data is provided via the XM7 signal, and is updated according to the users settings. Use the Rotary/ Select Knob or the UP and DOWN buttons on the remote control and select the Set Clock Screen. Press the Rotary/Select Knob or the (XM) Select button on the remote control to confirm the selection. This feature is used set the clock to the Time Zone in which the user resides (see Figure 31).
Setting Hour Selection (12 / 24) Setting Daylight Savings Selection This feature is used set the time to be displayed to either a 12hour (Default) or 24-hour format (see Figure 32). Use the Rotary/Select Knob or the remote control UP and DOWN buttons to highlight either “12 hour Clock” or “24 Hour Clock” then press the Rotary/Select Knob or the (XM) Select button on the remote control. Once a selection is made a screen will appear to confirm the selection.
Auto-On Auto-Off / Sleep Timer The Xpress XM7 unit is configured to shut down when the vehicle is shut OFF or power is disconnected. By default, when the power to the unit is reapplied the user must press the Power button to turn the unit back ON. This feature allows the user to program the Xpress XM7 unit to automatically turn ON when the power to the unit is reapplied (much like a car radio).
When the desired setting is highlighted, press the (XM) Select Button on the Remote Control to make the selection. A second screen will appear to confirm the setting. Once a selection is made a screen will appear to confirm the selection. If yes is selected all of the users preset settings are erased and the unit returns to the original factory default settings. A second and third screen will appear to confirm the selection (see Figure 36).
the Search button, Rotary/Select Knob or the (XM) Select button on the remote control is pressed to confirm the selection. -Exit MenuTo exit the menu options rotate the Rotary/Select Knob CW or press the down arrow on the remote control to highlight ‘Exit Menu’. Press the Rotary/Select Knob or the (XM) Select button on the remote control to confirm the selection.
Memory This feature allows the user to program into memory favorite song titles, artist names and channel information. To make an entry, press the memory (mem.) button and a “Saved in Memory” confirmation screen will appear (see Figure 39). Up to 20 entries can be stored. When 20 entries have been stored any new information that is saved will replace the oldest entry in memory. To recall the saved information, press and hold the memory (mem.
Turning The Xpress Unit OFF To turn the Xpress XM7 unit OFF, press the power button on the unit or on the remote control. The following screen will appear, the curved lines on either side of the XM7 logo gradually disappear and the unit will shut down. Figure 40.
REMOTE CONTROL Remote Control Features The wireless remote control supplied with the Xpress XM7 unit is capable of operating most of the features from a remote location. Each button on the remote control functions in the same way as the button on the Xpress XM7 unit. For a full description of a keypad button and function refer to the preceding sections in this manual. For optimal operation of the remote control, always aim it toward the Remote Sensor on the front panel of the main unit. Figure 42.
Menu Button (menu) – The MENU button is used to access “Main Menu” options which allows the user to make feature function adjustments and set personal preferences. Upon entering the main menu mode, use the UP and DOWN buttons to highlight the desired function. Press the (XM) SELECT button to confirm the selection. Select Button (XM) – This button is used to confirm a desired channel/category selection and various menu options.
Search Button (search) – Depressing the Search button will cause the unit to initiate a search based on the search mode stored in the unit. Channel Up Button – This button is used to enter the next higher channel number as well as navigate to the next higher line in a list of menu options. Channel Down Button – This button is used to enter to the next lower channel number as well as navigate to the next lower line in a list of menu options.
CARE AND CLEANING TROUBLESHOOTING • Keep the unit away from excessive moisture or where it may get wet. • It is strongly recommended that the unit be installed and kept away from heat sources or direct sunlight. • When cleaning, use only a soft, dry cloth. • Never use any chemicals, abrasives, solvents, alcohol based cleaning solutions or ammonia. • Always operate the unit where air can circulate completely around the unit.
SPECIFICATIONS Audio Output 3.5mm Diameter Min-Stereo Jack AUX (Audio Input) Output 3.5mm Diameter Min-Stereo Jack Power Supply: 5 Volt, 2 Amp Maximum, Negative Ground, DC Input. CAUTION: Use only the Audiovox approved adapter specified in the kit for the Xpress XM7 Satellite Radio Receiver, or the unit could be severely damaged. Antenna 1 RF SMB Connector Dimensions H X W X D 2.44 Inches X 4.44 Inches X 1.22 Inches (62.0mm) X (112.7mm) X (31.
WARRANTY -38-
USER NOTES -39-
THIS PAGE LEFT BLANK INTENTIONALLY -40-
© 2005 Audiovox Electronics Corporation 128-7454 DRAFT -41-
