LCD TV Operating Manual FPE1505DV Before connecting, operating or adjusting this product, please read the manual thoroughly FOR ASSISTANCE CALL 1-800-645-4994 OR VISIT US AT WWW.AUDIOVOX.
Table Of Contents Table of Contents ------------------------------------------------------------------------- 1 Important Safety Instruction ------------------------------------------------------- 2 Characteristic Features --------------------------------------------------------------- 4 Disc Information --------------------------------------------------------------------------- 5 Front Panel ----------------------------------------------------------------------------------- 6 Top and Right Panel-----------
Important Safety Instruction WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OF MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
Important Safety Instructions Note: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use the unit near water. Clean only with dry cloth. Do not block any ventilation openings. Maintain well-ventilated conditions around the unit. Do not place on anything that blocks ventilation. Install in accordance with the manufacturer’s instructions.
Characteristic Features This product consists of a DVD player, LCD display and TV receiver integrated and conveniently packaged in to one system. Operating Modes Advanced Playing Features DVD mode Compatibility TV mode DVD, CD, CD-R, CD-RW, JPEG discs AUX mode compatible. S-VIDEO mode Zoom Function PC mode Enlarge the picture to enhance your High Quality Audio and Video enjoyment.
Disc Information Discs Formats Supported By This Player DISC LOGO CONTENTS SIZE MAXIMUM TIME 133min(SS-SL) DVD Audio+Video (active picture) 12cm 242min(SS-DL) 266min(DS-SL) 484min(DS-DL) CD Audio 12cm JPEG Still high resolution 12cm 74min The operating mode of some DVD discs is specified by the disc maker’s software. Refer to the instructions with the disc.
Front Panel Front Panel Drawing 1. LCD Screen Displays high-resolution pictures. 2. Power Indicator In normal playback mode, the indicator lights green, the indicator lights red when in standby. 3. Remote sensor Receives the signal from the remote control. 4. Speakers Two speakers for the production of stereo audio.
Top and Right Panel Top Panel Drawing 1. SOURCE button Press to select different modes of operation DVD, TV, AUX S-VIDEO and PC. 2. MENU button Press to access the units set up screen. The same function as the SCREEN SETUP button on the remote control. 3. CH !/" button Press to select channels. The " button moves the channel selection forward and the ! button moves the channel selection backward. 4. VOL /+ button Press to decrease or increase the volume.
Rear Panel Unit Rear Panel Drawing 1. DC 12V IN Connection for applying to the power to unit using the power cord. 2. VGA Input jack Connection to the VGA output jack on a personal computer. 3. PC Audio Input jack Connection to the audio output jack on a personal computer. 4. S-Video input jack Connection for S-Video input. 5. L/R audio input jacks Connection for external audio input under S-VIDEO or AUX mode. 6. Video input jack Connection for external video input. 7.
Remote Control Remote Control Drawing 1. POWER button Press to access to or exit the STANDBY mode. 2. SOURCE button Press to select modes (DVD, TV, S-VIDEO, VIDEO and PC). The unit can memorize the last mode when exit from the standby mode. 3. P. STD button Press to change the picture mode to four factory presets. 4. BBE button Press to shift between BBE 1, BBE 2, and BBE OFF. BBE is available for activating high quality sound effects. 5. VOLUME + Press to increase the volume level. 6.
Remote Control 15. REPEAT button Press to repeat a chapter, track, title, or all content under DVD mode. 16. A-B Repeat Press to mark a segment to repeat between A and B. 17. ! Previous Skip Press once to skip to the beginning of the current chapter/track. Press twice repeatedly to skip to the previous chapter/track for some discs under DVD mode. 18. " Next Skip Press to skip to the next chapter/track for some discs under DVD mode. 19. Eject Press to open or close the disc tray. 20.
Remote Control Preparation of Remote Control Using of Remote control Insert the batteries with the positive (+) polarity Use of the remote control must be at a distance facing up when looking at the back of the less than or equal 7m and within a 60 degree remote.. 1. Remove the empty battery receptacle. 2. Remove the film from the battery. 3. Insert the battery into the receptacle and insert the receptacle into the remote. 4. Under normal use the battery will last for six months. 5.
System Connections Connecting To AV Signal Source Use the supplied audio/video cable to connect the unit to an external AV output source. Use the S-video cable to connect the unit to an external AV source with S-video output. Connections should be made as follows: When connecting to an external AV source insure that the source, cable and unit color coding all match. After connecting press the SOURCE button to select AUX or S-VIDEO mode to view the external devices via the unit’s AV input jacks.
System Connections Connecting To a Personal Computer The unit can be used as a PC display screen, by connecting the unit to the computer via the VGA connector. Also connect the Audio In jack on the rear panel of the unit to the audio output jack of the computer. See the below figure: After connecting, press the SOURCE button on the remote control to PC mode. And set the PC Display resolution: 1024×768@60Hz.
System Connections Connect To TV-Signal Input Attach the coax cable to the jack marked ANT INPUT on the rear panel of the unit. Once this connection has been made you can enjoy TV programs. After connecting, press the SOURCE button on the remote control on top of the unit to select TV mode.
System Connections Connecting To Power Adapter Power is supplied to the unit through the power adapter. One end of the power adapter connects to the DC 12V IN jack on the rear panel and the other and the other to a outlet rated at AC100-240V. (See to the picture below). Connecting To a Headphone Plug the headphone into the jack on the rear panel of the unit. When the headphone is plugged in, the unit’s internal speakers will be displayed.
TV Function Basic Operation Connect the antenna to the antenna jack on the unit’s rear panel. Connect the power supply cord to the +12VDC input power jack and 120VAC power outlet. If the player is in standby mode, press the POWER button to turn on the unit’s power. Press the unit’s SOURCE button to select TV mode. Press the unit’s remote control ▼, ▲ (direction buttons) or use the number buttons directly, to select the channel that you wish to view.
TV Function When the TV System Setup menu is active, use the▼, ▲ buttons to select items you want to set, press the ►, ◄ buttons to set the selected item to the desired setting and press the OK button to exit from the menu. Channel Use the▼, ▲ buttons to select CHANNEL, use the ►, ◄ buttons to change the number. AFC (Auto Frequency Control) Use the▼, ▲ buttons to select AFC, press the ►, ◄ buttons to select ON or OFF. When ON, the player will automatically fine-tune the frequency.
TV Function The auto memory tuning operation will take a few minutes to complete. When the tuning operation completes the unit will automatically exit and will have memorize the stations with sufficient signal strength. During auto memory tuning, press the ◄ button to exit the auto memory tuning process and have the unit commit all stations found to this point to memory. General Setup Press the SCREEN SETUP button three times repeatedly on the remote control to access the TV setup menu.
TV Function Note: The default password is 3308. This password will always be effective even after you change the PIN. When you input the password, the following menu will be displayed: V-CHIP SETTING ►V-CHIP TV RATING MPAA RATING CHANGE PIN ON At this menu, use the▼, ▲ buttons to position the cursor over the item you want to set, use ► to enter the lower menu and reveal the selections allowed. Press the OK button to exit from the menu.
TV Function G PG PG13 R NC17 X MPAA RATING L L L L L L : PREVIOUS : CHANGE : NEXT : EXIT Use the ▼or▲ button to position the cursor over items you want to change, and then press the ► button to change the settings. When complete press the ◄ button to return to the V-CHIP SETTING menu. Change Pin In the V-CHIP setting menu, use the ▼or▲ button to position the cursor over MPAA RATING, press the ► button to enter the change PIN menu shown below.
TV Function Choosing a Multi-Channel Sound (MTS) Soundtrack Depending on the particular program being broadcast, you can listen to Stereo, Mono or a Separate Audio Program. (SAP audio is usually a foreign-language translation. Sometimes SAP has unrelated information like news or weather.) Under TV mode, choose a channel with signal, the LCD screen will display the following: CH 002 BTSC STEREO Stereo There are four modes: BTSC STEREO, BTSC SAP, BTSC ST+SAP or MONO.
AUX Function AUX Function This unit is equipped with an AUX input, which will allow you to enjoy programs from external sources. After connecting an external AV signal such as a VCR, camcorder, game player etc. Press the source button on the remote control to select the AUX input and start viewing the external source Picture Parameter setup Press the SCREEN SETUP button once on remote control to enter picture setup menu.
S-VIDEO Function S-VIDEO Function This unit is equipped with an S-Video connection, which will allow you to enjoy programs from external sources. After connecting an external AV signal such as a VCR, camcorder, game player etc. Press the source button on the remote control to select the S-Video input and start viewing the external source Picture Parameter setup Press the SCREEN SETUP button once on remote control to enter picture setup menu.
Computer Screen Function This unit’s TFT LCD display may be used as your computer’s monitor. Access the computer setup menu and follow the steps shown below: 1. Turn off power to the unit and the computer. Connect this unit to the computers VGA port using a VGA cable. 2. Apply power to the unit and the computer. 3.
Play Operation Preparation: After all connections have been made, turn on the unit and select the desired video input. Disc Loading Steps: 1. Press the POWER button on top panel of the unit. The player will detect if there is a disc and play it automatically if a disc is loaded. 2. Insert the disc into the player with the printed side facing you. (Refer to the below picture.) 3. The disc will be automatically pulled into the tray. "Loading "will be highlighted on the screen and playback will begin.
Play Operation Language (Audio) There can be up to 8 audio languages on a DVD disc. When you play a multi-language DVD disc you can use the AUDIO button on the remote control to select a language. Subtitle The DVD player can support multiple kinds of subtitles. When you play a multi-subtitle disc you can use the SUBTITLE button to select different subtitles. Various Camera Angles The movies on some DVDs have been recorded from various camera positions.
Play Operation JPEG Playback JPEG is a common picture format that requires small amounts of storage per image and has low loss in resolution. Hundreds of pictures can be stored on a disc in this format. In order to view JPEG photo albums, you can ask your film development company to make a ”PICTURE CD” when they develop your film. Normal Playback Load a JPEG disc in.
Playback Functions Stop the time (hour, minute, and second) and the Press this button once to stop playback and player will play the chosen titles or chapter from then press PLAY button to resume playback the inputted time. Press the GOTO button once from where it was stopped last. Press the again to exit from the preview window and button twice to stop playback completely. When menu. the play button is selected, playback will start ! Some DVD discs do not support the search from the beginning.
Playback Functions Programming Chapters / Tracks CD: Insert the CD and press the stop button, You can store up to 12 chapters of a DVD (or 12 followed by pressing the PROGRAM button. tracks of a CD) in an individually programmed The screen shown bellow will be displayed: order. Please proceed accordingly: DVD: Insert the DVD disc and press the stop Program Input button, followed by pressing the PROGRAM 1_ _ _ 2_ _ _ 3_ _ _ button.
Playback Functions Switching On and Off, Stand-by Connect the main cord to a wall outlet with a 5. voltage corresponding to the specifications on Playback starts automatically, usually the rear panel of the unit. DVD discs now shows a menu to choose 1. Press the POWER button on the top panel from. You can control this menu with the to switch on the unit. You can also operate direction buttons. all functions using the remote control (r/c).
System Setup Setup Menu You can change the default settings to your own preference. Press the ‘DVD SETUP’ button on the remote control to display the settings menu. The menu includes Language Setup, Video Setup and Audio Setup. Press the Right/Left direction buttons (',() on the remote control to select a category. All the items in the category will appear on the screen.
System Setup Close Caption You can select captions On or Off during playback. Video Setup Press the Right direction button (() to select Video setup menu, the following screen will be displayed: Language Video TV Display Angle Mark Screen Saver Wide On On Rating In the Video setup menu, use the UP/DOWN direction buttons (),*) to highlight the item to be changed then press the OK button to reveal the options allowed.
System Setup Password Parental control features are password protected. Use the number buttons to input 3308, then press the ▼ button to select Rating. Press the OK button to select the rating level, then press the ▲ button to select the Password, use the number buttons to input a new password, press the OK button again, the “+” will be displayed on the screen. NOTE: The default password is 3308. You can use the 3308 or the new password to enter the Rating level selecting mode.
System Setup LCD Setup Menu Turn on the power of the unit and press the SOURCE button on the remote control or front panel to select DVD mode. Picture Parameter Setup Press the SCREEN SETUP button on the remote and the following screen will be displayed: Press the ▼, ▲ button to highlight Bright, press the ►, ◄ button to adjust the desired value. PICTURE ►BRIGHT CONTRAST AUTO PHASE CLOCK H.POSITION V.
Troubleshooting SYMPTOM CHECK ITEM The player cannot play DVD. Make sure disc is loaded in. Make sure disc is loaded with label facing forward. Make sure disc is not dirty or warped. Make sure the DVD region code is the same as region code of DVD player. Make sure water condensation has not occurred. Take out disc and leave the player on for at least one hour when water condensation occurs. There is no sound. Make sure system connection is correct. Make sure system is not in mute.
Specifications Specifications: Model Number: FPE1505DV ver:01 Features UPC number: 0-44476-02825-0 15" LCD TV/DVD Combo Display Features Built in Slot -In type Progressive Scan DVD player Display type TFT LCD DVD, CD, CD-R, CD-RW, Picture CD compatible Screen Size 15.0 inch (diagonal) Built in Dolby Digital 2ch decoder Active Area 304.1(H) x 232.
1024x768 @ 60Hz/75Hz Playback Compatibility Unit W/O Stand Audio CD Yes CD-R Yes Warranty Yes DVD+R Yes Operating Temperature DVD+RW Yes Operating Humidity DVD-R Yes DVD-RW Yes DVD-Video Yes Kodak Picture CD Yes VCD Yes 90 Days Parts & Labor CD-RW SVCD 14.2 (lb) 11.2 (lb) Unit W/stand Environment 41°F - 95°F 10% - 95% Yes Playable Format (Codec) MP3 NO CD-DA Yes .MPEG Yes .WMA Yes Picture CD (JPG) Yes VCD 1.1 NO VCD 2.