4”/6” TFT- LCD COLOR TV CTV-5040 / 60 INSTRUCTION MANUAL 91-S2-1005
RECOMMENDED GUIDELINES FOR THE USE OF A VIDEO MONITOR/TV IN A MOTOR VEHICLE • A VIDEO MONITOR/TV is designed for rear passenger viewing only. This product may only be installed in the rear seat compartment of the vehicle, out of the driver’s view. • Installation in any other area of the vehicle, including anywhere within the driver’s view, is illegal in most states, provinces and countries and may lead to driver distraction resulting in an accident, injury and/or death.
FUNCTION-------------------------------------------------------1 2 FIG. 1 FRONT 1. POWER INDICATOR 1. REMOTE CONTROL SENSOR 1. SCREEN 3 FIG. 2 TOP 1. 1. 1. 1. 1. 12 1. 4 5 6 7 1. 1. 1. 8 9 10 11 POWER ON / STAND BY key AUTO PROGRAM key TV / AV1 / AV2 key PICTURE SELECT key VOLUME DOWN key (PICTURE SELECT DOWN) VOLUME UP key (PICTURE SELECT UP) CHANNEL DOWN key CHANNEL UP key ROD ANTENNA FIG. 3 RIGHT 14. 15. 15. 15.
FIG. 4 LEFT 18. SPEAKER 19. BACKLIGHT HIGH/LOW switch (Model 5040 only) 20. DIVERSITY OUTPUT jack 21. DC INPUT jack 22. POWER ON / OFF switch 19 18 20 21 22 FIG. 5 BACK 23 23. STAND 24. FIXING NUT LIFT 24 FIG.6 REMOTE CONTROL UNIT 31. POWER ON / STAND BY key 32. AUDIO MUTE key 33. TV / AV1 / AV2 key 34. AUTO PROGRAM key 35. PICTURE SELECT key 37. VOLUME DOWN key (PICTURE SELECT DOWN) 38. VOLUME UP key (PICTURE SELECT UP) 39. CHANNEL DOWN key 40.
INSTALLATION-------------------------------------------------POWER 1. One of the following power sources can be used. 1) AC power adapter. 2) Car battery (with car cord connected). 3) 8 x UM-3 batteries (optional battery box used). For longer operation time, the alkaline batteries are recommended and move the BACKLIGHT HIGH / LOW switch (19) to “LO” for power saving. (Model 5040 only) 2. Move the POWER ON / OFF switch (22) to “ON” to make the TV unit at stand-by status.
TV OPERATION------------------------------------------------1. Pull out the ROD ANT (2) or connect an external antenna to ANT jack (14) for better reception. 2. Used in the vehicle, the diversity unit (with boost function) is recommended to use to improve the reception performance. 3. Press the TV / AV1 / AV2 key (6,33) to the TV mode. 4. Press the AUTO PROGRAM key (5,34) to scan the whole channels and memorize them. 5. Press the CHANNEL UP (11,40) or DOWN (10,39) key to select the desired TV station.
8. Picture Adjustment 1) Press the PICTURE SELECT key (35) several times, the screen will appear the picture control bar in the following order sequentially. 2) Before the disappearance of the PICTURE SELECT UP (VOLUME UP) (9,38) or DOWN (VOLUME DOWN) key (8,37), to adjust the picture quality. For example, COLOR DOWN UP 3) Press the PICTURE RESET key (36) on the remote control unit to recover the original picture setting. 9.
MONITOR OPERATION--------------------------------------1. Input the AV signal from the sources (VCR, Video camera, GPS, etc.) to the AV1 (15) and /or AV2 (16) jacks. The yellow terminal of the AV cord connects with the video signal; the white terminal with audio. 2. Press the TV / AV1 / AV2 key (6,33) to select the desired AV source. The screen is dark with no video inputs. 3. Picture adjustment: as the TV operation described above. 4. Audio operation: as the TV operation described above.
IMPORTANT NOTES------------------------------------------1. Do not expose to temperature extremes or direct sunlight. (See specifications) 2. Avoid dust and wet. 3. Avoid dropping and strong impact. 4. Turn power off and unplug the adapter when not in use or thundering. 5. Never watch while driving a vehicle. 6. Never attempt your own maintenance.
TROUBLESHOOTING----------------------------------------Before assuming malfunction of TV, check as follows: SYMPTOMS No power • • • • Remote control unit cannot work • • • No picture and sound • • Blurry picture and noise • • Sound heard but picture all white or dark Sound heard but color light Picture visible but no sound POSSIBLE CAUSES AC adapter or car cord not properly connected Fuse of car cord blown Dead batteries Incorrect polarity of batteries (battery box used) Batteries unloaded, dead or
SPECIFICATIONS----------------------------------------------CTV-5040 / 60 TYPE DISPLAY SCREEN BACK LIGHT POWER SUPPLY POWER CONSUMPTION RECEPTION CHANNELS INPUT TERMINALS OUTPUT TERMINALS OPERATION TEMPERATURE STORAGE TEMPERATURE DIMENSIONS WEIGHT Color LCD TV SIZE 4 inches (82.1 x 61.7mm)(W x H) 6 inches (112.9 x 84.
ACCESSORY LIST--------------------------------------------Description AVT-988 9” Color Television with Remote (12V) AVT-597 5” Color Television with Remote (12V) AVT-1498 13” Color Television with Remote (12V) AVP-7000 Video Cassette Player (12V) AVP-7285 Video Cassette Player (12V) Wireless Headphone Kit: Includes 2 sets Wireless Headphones and Transmitter BPA-501-12 4 Amp Adapter for use with AVT-988 9” and AVT-1498 13” Televisions AC2A- 2 Amp Adapter for use with AVT-597 5” TV and AVP-7000 Video Cassette
