AUDio,~ox® ELECTR ONICS CORP.
TABLE OF CONTENTS SAFETY INFORMATION ............................. ............................. ....4 FEATURES .............................. .............................. ......................5 CONTENTS .............................. .............................. .......................5 DISC NOTES .............................. .............................. ....................6 Handling and Cleaning .................................. .................................. ..........6 Disc Cleaning .....
TABLE OF CONTENTS CD/MP3NCD Operation ....................... ....................... ....................... ......19 USB and Memory Card Operation .....................................................................19 System Setup ....................... ....................... ....................... ...................20 DVD Setup ....................... ....................... ....................... ....................... .20 System Setup Menu ........................................................
Thank you for choosing the AXDVD1 DVD Player. The AXDVD1 is designed to optimize the enjoyment of your favorite DVDs in a mobile environment. This DVD player is designed to provide years of reliable, trouble-free service. Please read this manual thoroughly prior to operating the DVD player and save it for future reference. SAFETY INFORMATION Use This Product Safely. Before attempting to connect or operate this product, please read the following instructions.
FEATURES • • • • Compatible with PAL and NTSC. This DVD player can play discs recorded in either PAL or NTSC format. Left/Right stereo analog audio outputs for connection to an existing head unit aux inputs. Video output is composite video.
DISC NOTES • To get the optimum use out of the DVD player, make sure you read this section completely. · Handling and Cleaning • Dirt, dust, scratches and warped discs may cause the DVD player to ) malfunction. Do not bend l • Do not place stickers on discs. • A disc should always be kept in its case when not in use to prevent damage. • Do not place discs in the following Wipe the dtSC from center tow·ard the outstde edge places: 1. Direct sunlight. DVD Region Code 2. Dirty, dusty and damp areas.
INSTALLATION the vehicle AC~ and Battery wiring. Failure to do so can result in damage to the vehicle if a short circuit develops between the -vehicle connection point and the mobile video product. REMOVE SCREWS BEFORE INSTALLATlON Before installing the unit, please remove the two transport screws. Take out screw before installation. • • The unit should be installed in a horizontal position with the front end up at a convenient angle, but not more than 30°.
INSTALLATION 1. Powering your DVD player (Refer to the Connections illustration) Connect the black wire (-) to the vehicle ground. Connect the red wire(+) to a switched (Accessory) 12VDC source. Connect the yellow wire to a Battery (Constant +12VDC) connection. Plug the other end into the 12VDC input jack on the back of the DVD player. 2. Remote IR Receiver (Refer to the Connections illustration) Plug the 1/8" plug on the remote IR cable into theIR IN jack on the back of the DVD player. 3.
CONNECTIONS Video connections to a monitor can be done with RCA-type video connections. As a precaution, be sure to turn off the power of the DVD player and the monitor(s) before making any connections. Audio connections can use either the coaxial connector (digital audio) or the RCA type connectors (analog aud~o ). DIGITAL AUDIO OUT 0 0 Q VIDEO.OUT 0 DC 12V OUT -+----++-- --o-+ 2A External Remote Sensor (.) (.
FRONT AND REAR PANEL CONTROLS, INDICATORS AND CONNECTORS Front panel: AIJDIOTOX 10 Rear panel: 1. POWER button 11. EJECT button 2 . ..._.. (Play/Pause) button 12. DC 12V IN jack 3. MODE button 13. DC 12V OUT jack 4. Disc Slot 14. REMOTE SENSOR jack 5. ~~button (Used to connect the 6. ~~button external remote sensor) 7. Reset button 15. AUDIO OUT Left jack 8. USB and Memory Card insert 16. AUDIO OUT Right jack cover 9. AV IN jack 17. VIDEO OUT jack 18. DIGITAL AUDIO OUT jack 10.
REMOTE CONTROL FUNCTIONS Remote Control 1. MUTE 2. POWER Press this button to mute the audio. Pressing the button again restores the Press this button to turn on the DVD player on and off. audio to the previously set volume. 3. 0-9 Allows the user to enter the numbers 0-9 for selection of the tracks, titles, chapters and setting the password.
REMOTE CONTROL FUNCTIONS 10.ZOOM 4. SUB-T Press this button to display and select Press this button to enlarge or the subtitle language in DVD mode .. reduce the picture size when Each time the button is pressed, the playing a DVD disc. Pressing this subtitle language changes. button once enlarges the picture two Note: The type and number of times the normal size, twice languages for subtitles vary from disc to enlarges the picture 3 times the disc.
REMOTE CONTROL FUNCTIONS 15. ~ EJECT Press this button to eject a disc. 16. A-8 playback. Press twice to stop playback completely. Press this button to repeat a specific section of a disc. Press this button to 24. ~II PLAY/PAUSE Press this button to activate the play mode. Press again to pause mark down the starting point (A) and press it again to mark down the ending playback. point (B). Press this button a third time to cancel A-8 repeat and resume normal 25.
REMOTE CONTROL FUNCTIONS Remote Control Initial use Initial Use When purchased, the remote control has a battery installed with a Pull Tab to prevent battery discharge. Remove the Pull Tab before attempting to use the remote. + CR2025 + Battery Replacement 1. Remove the battery holder. 2. Insert one CR2025 battery into the battery holder. Be sure to observe the correct polarity. 3. Align the battery holder with the remote control and insert the holder. Push the holder in until it clicks.
OPERATION BASIC OPERATION Mode selection Press the MODE button on the front panel or MODE on the remote control to select the desired operating mode such as DVD AV IN, USB memory device, or SO card. ' Turning the DVD player on/off Press the POWER C.> button on the front panel or POWER C.> button on the remote control to turn the DVD player on. When the DVD player is on, press the POWER C.> button on the front panel or POWER C.> button on the remote control to turn the DVD player off.
OPERATION DVD OPERATIO.N continued Skipping tracks Pressing the...,.....,../~~ buttons on the remote control or ~111.,. buttons on the front panel during playback will skip to the next/previous track. Fast forward/fast reverse Press the NEXT ............ or the PREV ~~ buttons on the front panel or ~~f~.,. buttons on the remote control during playback to skip to the next or previous Note: The numeric buttons (0-9) on the remote control are used to select the track chapter/track.
OPERATION DVD OPERATION continued Repeat function The Repeat function has 4 options: Chapter, Title, Repeat All or Off. Move cursor to the Repeat function and press ENTER. The Repeat default is Off. During zoom mode, press ~/..,., buttons to move the picture to the left/right, and press the •tT buttons to move the picture up/down. Multi-subtitle language function Press the SUB-T button on the remote control during playback. Each time the button is pressed, the subtitle language will change.
OPERATION DVD OPERATION continued Goto Function Press the GOTO button on the remote Program play In program play mode, you can play tracks in a desired sequence. Press the PROG button on the remote control and the following menu will be displayed. control and the following screen will be displayed Use the buttons to select a screen item. Use the numeric buttons to input a specific Title, Chapter or Time of the DVD disc to access directly. Press the ENTER button to confirm. The DVD player will <111111/.
OPERATION button on remote control to confirm. The Tracks will be played in the order they were programmed. d) If you want to clear the program, press the PROG button on the remote control. Use the ..._,.,..., JA./T cursor buttons to select CLEAR on the screen and press the ENTER button. CD/MP3NCD OPERATION Note: For VCD2.0 discs when the PBC function is activated the Repeat, Random, A-B Repeat, Program and GOTO functions are unavailable.
OPERATION SYSTEM SETUP MENU SYSTEM SETUP When you access the setup menu, you will see the system menu below: The System Setup menu allows you to personalize the DVD player settings to your preference. DVDSETUP In DVD mode, while the disc is playing or stopped, press SETUP button on the remote control to enter setup menu. The following menu will appear: a. TV SYSTEM: Changes the TV SYSTEM format to NTSC, PAL or AUTO. b. AUTO PLAY: Turns the function ON and OFF.
OPERATION SYSTEM SETUP continued AUDIO SETUP Using the ...,. button select the audio setup menu. The following menu will appear: g. DEFAULT: This item allows a user to restore all the factory default settings except the settings for the Password, Setup Page and Ratings. LANGUAGE SETUP Using the ...,. button select the language setup menu. The following menu will appear: a. AUDIO OUT: Changes the characteristics of the audio output signal. The choices are: SPDIF/OFF, SPDIF/RAW and SPDIF/PCM . b.
OPERATION VIDEO SETUP continued SPEAKER SETUP Using the ..,.. button select the speaker setup menu. The following menu will appear: b. CONTRAST: Adjusts the brightest highlights level in the picture. Use the ..,.. button to select the adjustment scale. Use the J/t;../T buttons to select a level value and press the ENTER button to confirm your selection. c. HUE: Adjusts the tint balance level in the picture. Use the ..,.. button to select the adjustment scale. Use the Ji..
OPERATION DIGITAL SETUP continued Note: The displayed information is varies according to the type DVD discs. b. DYNAMIC RANGE: Used to adjust the dynamic range between 1/8, 2/8. 3/8, 1/2, 5/8, 3/4, full. c. DUAL MONO: Adjusts the audio output signal to stereo, mono L, mono R, and mixed mono. Last Memory The Last Memory function allows you to stop DVD playback and the DVD player will memorize the location on the DVD disc where play back was stopped.
TROUBLESHOOTING The remote control is out of it's operating If it appears that your DVD player is not operating correctly, please consult this checklist. area. Make sure the remote control is within the operating area. The DVD player stops working when a USB device or memory card is inserted into the DVD player. The connected USB device or the memory card is probably not a certified one. The DVD player cannot play an uncertified USB device or memory card.
SPECIFICATIONS GENERAL Power Supply Requirements 12 Volts DC, Negative Ground Line Out 2.0Vp-p Video Output 1 Vp-p 75 Ohm unbalanced Compatible Discs DVDNCD/CD Signal System PAL/NTSC Operating Temperature 0-35°C Dimensions LXWXH 6.25" X 6.12" X 2" 158.75mm X 155.44mm X 50.8mm Note: Specifications are subject to change without notice.
12 MONTH LIMITED WARRANTY Applies to Audiovox Mobile Video Products AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor.
NOTES 27
I 00 \ For Customer Service Visit Our Website At www.audiovoxproducts.com Product Information~ Photos, FAQ's Owner's Manuals ©2011 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, N.Y.
Thank you for purchasing an Audiovox product. We pride ourselves on the quality and reliability of all our electronic products but if you ever need service or have a question, our customer service staff stands ready to help. Contact us at www.audiovox.com tl PURCHASE REGISTRATION: Registering On-line will allow us to contact you in the unlikely event a safety notification is required under the Federal Consumer Safety Act. L" AUDIOTO~ ~ELECTRONICS CORP. Register Online at: WWW.AUDIOVOX.