5” LCD TV with DVD Player Operating Instructions Model No. FPE1506DV For assistance, please call: 1-800-645-4994 Or visit us at WWW.AUDIOVOX.COM Before connecting, operating or adjusting this product, please read these instructions completely.
Table Of Contents Important Safety Instructions--------------------------------------------------1 Characteristic Features ---------------------------------------------------------3 Disc Information -------------------------------------------------------------------4 Front Panel---------------------------------------------------------------------------5 Rear Panel----------------------------------------------------------------------------7 Remote Control------------------------------------------------------
Important Safety Instructions The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Important Safety Instructions Note: 1. 2. 3. 4. 5. 6. 7. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use near water. Clean only with dry cloth. Do not block any ventilation openings. Maintain well ventilated conditions around the product. Do not put product on bed, sofa or anything that blocks ventilation. Install in accordance with the manufacturer’s instructions. 8.
Characteristic Features This product incorporates a DVD player, LCD display and TV receiver in one system. Multiple Mode USB and CARD PORTS Designed with USB and SD/MS/MMC card port, can be connected to USB device or SD/MS/MMC Card. DVD mode Component mode VGA mode TV mode CVBS mode S-VIDEO mode Auto TV Searching Function Can be connected to the TV antenna, support Auto and manual TV programs searching function.
Disc Information Discs Formats Supported By This Player DISC LOGO CONTENTS SIZE MAXIMUM TIME 133min(SS-SL) DVD Audio+Video (active picture) 12cm 242min(SS-DL) 266min(DS-SL) 484min(DS-DL) CD Audio 12cm JPEG Still high resolution 12cm 74min The operating method of some DVD discs is specified by the software maker. Please refer to the instruction manual of the disc. About Disc Terms Title Generally, pictures or music compressed on a DVD are divided into several sections, “title”.
Front Panel 1. 15" color TFT screen 15" color TFT screen clearly show the data. 2. SOURCE button Press to select the modes: DVD, Component, VGA, TV, CVBS or S-VIDEO. 3. MENU button Press to enter or exit setup menu. 4. CH▲/▼ button In the TV mode, press to select channels. In setup menu, the same function as ▲/▼ direction buttons. 5. VOL▲/▼ button In the TV mode, press to decrease or increase the volume. In setup menu, the same function as ◄/►direction buttons.
Front Panel 7. ■ STOP button Press to stop playback, then press the PLAY button to resume normal playback in DVD mode. Press the STOP button twice repeatedly to stop completely. 8. Eject button Press to eject the disc out. 9. Power button Press to enter or exit the standby mode. 10. SD/MS/MMC Card Port Insert the SD, MS or MMC card into the port. 11. Disc Tray Slot Used to load disc. 12. Earphone Jack When connected to earphone, the internal speakers will automatically turn off. 13.
Rear Panel 5. TV Signal Input Jack Connected for the external NTSC TV signal input. 6. DC 12V In Jack Connected to power adapter. 7. VGA Input Jack Connected to the VGA output jack on a personal computer. 8. PC AUDIO Input Jack Connected to the PC audio output jack. 9. Power Supply Cord 1. Y/Pb/Pr Input Jack Connected to the Y/Pb/Pr input in Component mode. 2. L/R Audio Input Jack Connected to the L/R audio input in Component mode. 3. AV Output Jacks Connected to the external AV input device. 4.
Remote Control Remote Control Drawing 1. POWER button Press to enter or exit the standby mode. 2. 0~9 Number buttons Press to select numbers. 3. LAST button In the TV mode, press to return to the channel last viewed. 4. MTS button Press to activate MTS function in TV mode. 5. VOL +/- button Press to increase or decrease the volume. 6. CC button In the TV or CVBS mode, press to display the closed captions or cancel display. 7. EXIT button Press to exit the setup menu. 8.
Remote Control Press to select numbers. 6. Direction buttons (▲▼◄►) In the setup menu, press the ▲▼button to select the desired item and press the ◄► button to adjust or set. 7. ENTER button Press to confirm your selection. 8. TITLE button When a DVD disc is playing, press to go to title menu if the disc contains. 9. MENU button (in DVD mode) Press to enter the disc menu in DVD mode. 10. REPEAT button Press to repeat a chapter, track, title or all content in DVD mode. 11.
Remote Control Preparation of Remote Control Using of Remote control Softly push the back cover to open the battery compartment. Point the remote control unit from no more than about 7m from the remote control sensor and within about 60 degrees of the front of the unit. Insert two batteries (1.5V, size AAA), please make sure the polarity matches the marks inside the compartment. Softly press the back cover to close it. The operating distance may vary depending to the brightness around.
System Connections Do not connect the power cord until all other connections have been made. Ensure that you observe the color cord when connecting audio and video cables. Connecting to External AV Signal Source Use the audio and video cable to connect the AV input jacks on the rear panel of the unit to the external AV signal source. Use the S-VIDEO cable to connect the S-VIDEO input jack on the rear panel of the unit to the external AV signal source.
System Connections Connecting to External AV Signal Source YPbPr Use the audio and video cables to connect the Y/Pb/Pr input Jacks on the rear panel of the unit to the external AV signal source. After connection, turn on the power of the unit and external AV signal source and then press the SOURCE button to shift to Component mode.
System Connections Connecting to External AV Device AV Out The unit supports AV signal output, it can be connected to the external audio and video devices. Use the audio and video cables to connect the AV output jacks on the rear panel of the unit to the external AV device.
System Connections Connecting to PC The unit can be connected to PC (person computer) via the VGA cable. Follow the steps and the figure below to connect: 1. Connect one end of the VGA cable to the VGA input jack on the rear panel of the unit. 2. Connect the other end to the PC. 3. Connect one end of the audio cable to the PC audio input jack on the rear panel of the unit. 4. Connect the other end to the PC audio output jack. 5.
System Connections Connecting to Earphones This unit can be connected to an earphone for listening to music privately. See the below figure for derails: After connecting to the earphone, the internal speakers output will turn off automatically. Connecting to Power Supply Plug the power supply cord to the AC100~240V wall outlet.
System Connections Connecting to Car Adapter Power also can be supplied through the DC power adapter (Car Adapter), one end is connected to the DC 12V IN jack on the rear panel of the unit, the other end to the vehicle’s 12V accessory/Cigarette Lighter Socket, as shown on the below: Attention Do not operate the unit or view video software while driving a vehicle. Place the unit in a proper position for viewing. We advise you to disconnect the unit from the cigarette lighter at the instant of car start-up.
System Connections Connecting to TV Antenna This unit can be connected to the TV signal input source via the TV jack on the rear panel. After connection, turn on the power to the unit, press the SOURCE button to shift to TV mode. After connecting to the antenna, turn on the unit, and go on with program searching, you can follow the below steps to select channels: 1. For 0~9 channel: Press the number buttons to select the channel X, wait three seconds and it will go to the selected channel.
TV Function Preparations 1. After connection, press the POWER button to turn on the power. (If it is turned on, the power indicator is blue.) 2. Press the SOURCE button to shift to TV mode. You can go on with the following operations: Image Setting Note: This item is only available when there is signal input. Press the MENU button once to enter the setup menu, as shown on the right: In the setup menu, press the ▲▼ button to select Image and then press the ENTER button to enter the item.
TV Function Contrast Setup Press the ▲▼ button to select Contrast and press the ◄► button to adjust the value. Press the MENU button to return to the previous menu. Hue Setup Press the ▲▼ button to select Hue and press the ◄► button to adjust the value. Press the MENU button to return to the previous menu. Saturation Setup Press the ▲▼ button to select Saturation and press the ◄► button to adjust the value. Press the MENU button to return to the previous menu.
TV Function Treble Setup Press the ▲▼button to select Treble and press the ◄► button to adjust the level. Press the MENU button to return to the previous menu. Balance Setup Press the ▲▼ button to select Balance and press the ◄► button to adjust the level. Press the MENU button to return to the previous menu. MTS Setup Press the ▲▼ button to select MTS and press the ENTER button to enter. Press the ▲▼ button to select the desired item and then press the ENTER button to confirm your selection.
TV Function Parental Setting Note: The Parental Function is the same as that of V-CHIP. Press the MENU button to enter the setup menu. Press the ▲▼ button to select Parental and press the ENTER button to enter the menu shown on the right. In the Parental setup menu, press the ENTER button and then use the number buttons to enter the pin. The initial pin is 1111. Then press the ENTER button to continue and display the menu as shown on the right. Note: The Master password is 3308.
TV Function Clear All Press the ▲▼ button to select Clear All and press the ENTER button to enter. Press the ▲▼ button to select the desired item and then press the ENTER button to confirm your selection. Press the MENU button to return to the previous menu. TV Rating Press the ▲▼ button to select TV Rating and press the ENTER button to enter. Press the ▲▼ button to select the desired item and then press the ENTER button to confirm your selection. Press the MENU button to return to the previous menu.
TV Function CA Eng Rating Press the ▲▼ button to select CA Eng Rating and press the ENTER button to enter. Press the ▲▼ button to select the desired item and then press the ENTER button to confirm your selection. Press the MENU button to return to the previous menu. CA Fr Rating Press the ▲▼ button to select CA Fr Rating and press the ENTER button to enter. Press the ▲▼ button to select the desired item and then press the ENTER button to confirm your selection.
TV Function Setup Setting Press the MENU button once to enter the setup menu. Press the▲▼ button to select Setup and press the ENTER button to enter the menu shown on the right. In the Setup menu, press the▲▼ button to select the desired item and press the ENTER button to enter. Press the MENU button to return to the previous menu. Tuner/Channel Press the ▲▼ button to select the Tuner/Channel and press the ENTER button to enter the menu as shown on the right.
TV Function Channel System Press the ▲▼ button to select Channel System and press the ENTER button to enter. Press the ▲▼ button to select the desired item and then press the ENTER button to confirm your selection. Press the MENU button to return to the previous menu. Prog Organizer Press the ▲▼ button to select the Prog Organizer and press the ENTER button to enter the menu as shown on the right. In the Prog Organizer setup menu, press the ▲▼ button to select the desired item.
TV Function Fine Tune Press the ▲▼ button to select Fine Tune and press the ENTER button to enter. Press the ► or ◄ button to start fine tuning forward or backward. Press the MENU button to return to the previous menu. Language Press the ▲▼ button to select the Language, press the ENTER button to enter the setup, press the ▲▼ button to select item. Press the MENU button to return to the previous menu.
DVD Playback Operation Preparation After connections, turn on the unit and select the relevant video input before playback. Disc Loading Steps: 1. Press the POWER button to turn on the power. Press the SOURCE button to shift to DVD mode. 2. Handing the disc with its printed side outward vertically to the disc tray. (Refer to the below picture.) 3. Slightly put the disc into the disc tray. 4.
DVD Playback Operation Stop Press the ■ STOP button once to stop playback and then press PLAY button to resume. Press this button twice to stop playback completely. Pause Press the PAUSE button once to pause the playback, press it repeatedly to start step-by-step playback, press the PLAY button to resume normal playback. Previous and Next Press the button to go to the next chapter.
DVD Playback Operation Language (Audio) There can be up to 8 audio languages on a DVD disc. When you play a multi-language DVD disc you can use press the AUDIO button on the remote control to select a language. Subtitle The DVD player can support multiple kinds of subtitles. When you play a multi-subtitle disc you can press the SUBTITLE button on the remote control to select different subtitles.
DVD Playback Operation Fast Playback Press the or FWD/REV SCAN button on the remote control to activate fast backward or forward playback. Repeat Use the REPEAT button repeatedly to repeat Track, All or to cancel repeat. Some discs do not support the repeat function. Audio During CD playback, press the AUDIO button on the remote control to select the audio output mode: Mono Left, Mono Right, Mix-Mono and Stereo. Goto Press the GOTO button to access the time-selected state.
DVD Playback Operation Previous and Next During playback, press the or button to select picture. Menu Press the MENU button once to stop playback and return to the root menu. GOTO During playback, press the GOTO button on the remote control once, use the number buttons to input the file number. Picture Rotation This can be used only when the picture is normally displayed. Once another picture is selected, rotation will be cancelled automatically. Use the buttons to rotate the picture.
DVD System Setup Preparations 1. Connect to the power supply and turn on the unit. 2. Press the SOURCE button to shift to DVD mode. 3. Press the SETUP button on the remote control to display the settings menu. The menu includes General setup, Audio setup, Video setup, Preference and Password setup. 4. Press the direction buttons on the remote control to select a category. All the items in the category will appear on the screen. 5. Press the SETUP button again to exit the setup.
DVD System Setup OSD Lang The item is used to select the OSD language. 1. Press the direction buttons to select OSD Lang. 2. Press the ENTER button to enter the setup. 3. Use the direction buttons to select items. 4. Press the ENTER button again to confirm selection and return. Captions 5. Press the direction buttons to select Captions. 6. Press the ENTER button to enter the setup. 7. Use the direction buttons to select items. 8. Press the ENTER button again to confirm selection and return.
DVD System Setup Media Center 1. Press the direction buttons to select Media Center. 2. Press the ENTER button to enter the setup. 3. Use the direction buttons to select DVD, USB, SD/MMC or MS. 4. Press the ENTER button again to confirm selection and return. Audio Setup Page Press the SETUP button to enter the General setup menu, then use the direction buttons to select Audio Setup Page, the screen will display as the below: In the menu, Use the direction buttons to select the desired item.
DVD System Setup Dynamic 1. Press the direction buttons to select Dynamic. 2. Press the ENTER button to enter the setup, the screen will display as left: 3. Press the ENTER button to enter. 4. Use the direction buttons to adjust. 5. Press the ENTER button again to confirm setting and return. 6. Press the button to return. Hdcd Setup In the Audio Setup Page, use the direction buttons to select Hdcd Setup, press the ENTER button to enter the setup, the screen will display as below: 1.
DVD System Setup Video Quality Setup Select Quality, press the ENTER button to enter the menu as below: 1. In the menu, Use the direction buttons to select the desired item. 2. Press the ENTER button to enter the item. 3. Press the button to return. Sharpness 1. Press the direction buttons to select Sharpness. 2. Press the ENTER button to enter the setup. 3. Use the direction buttons to select High, Medium or Low. 4. Press the ENTER button again to confirm selection and return. Brightness 1.
DVD System Setup Preference Setup Press the SETUP button to enter the General setup menu, then use the direction buttons to select Preference Page, the screen will display as the below: In the menu, Use the direction buttons to select the desired item. Press the ENTER button to enter the item. Press the button to return. Audio 1. Press the direction buttons to select Audio. 2. Press the ENTER button to enter the setup, see the left figure: 3.
DVD System Setup Parental DVD discs equipped with the child lock function are rated according to their contents and settings vary from disc to disc. Depending on the disc, you can lock out playback of the disc altogether. 1. Press the direction buttons to select Parental. 2. Press the ENTER button to enter the setup, see the left figure: 3. Press the direction buttons to select item. 4. Press the ENTER button again to confirm setting, and you should enter the password. The Default Password is 3308.
DVD System Setup Password Mod 5. Press the direction buttons to select Password Mod. 6. Press the ENTER button to enter the setup, see the left figure: 7. Press the direction buttons to select On or Off. 8. Press the ENTER button again to confirm setting and return. Password Change You can change the password by yourself. 1. Press the direction buttons to select Password. 2. Press the ENTER button to enter the setup, see the left figure: 3. Press the ENTER button again to change the password. 4.
Other Function External AV Input Function The unit has external AV input function. It supports CVBS, S-VIDEO and Component modes. Use the audio, video and S-Video cable to connect the unit to the external AV signal source such as recorder, vidicon, satellite receiver or game player etc. Then turn on the unit and the external AV signal source. Press the SOURCE button to shift to the corresponding mode: S-VIDEO or Component. Then you can go on to set up the menu in a certain mode.
Troubleshooting SYMPTOM CHECK ITEM The player cannot play. Make sure disc is loaded in. Make sure disc is loaded upside down. Make sure disc is not dirty or warped. Make sure the player’s region code is the same as region code of DVD disc. Make sure water condensation has not occurred. If it occurs, take out disc and leave the player on for at least one hour. There is no sound. Make sure system connection is correct. Make sure the sound setup of DVD disc is correct.
Specifications TFT-LCD Resolution 1024 x 768 TFT-LCD Screen Size 15 inches AC100 240V 50/60Hz Power DC 12V 4A Power Consumption < 48W Dimension 388mm × 176mm × 374mm LXWXD Weight About 5.8 Kg Ambient Temperature 10~45 DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. © 1992 -1997 Dolby Laboratories, Inc. All rights reserved.
